Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

53%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
125 FPS
Ultra 1080p Measured
59 FPS

1440p (2K / QHD)

Low 1440p Measured
79 FPS
Ultra 1440p Measured
38 FPS

4K (Ultra HD)

Low 4K Measured
41 FPS
Ultra 4K Measured
20 FPS
16.1ms Frame Time
24ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 79,097
Graphics Card
Required 27,436
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 21 29 41
1440p QHD 38 39 56 79
1080p Full HD 59 62 88 125

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 62
1920x1080 Low 125
1920x1080 Medium 88
1920x1080 Ultra 59
2560x1440 High 39
2560x1440 Low 79
2560x1440 Medium 56
2560x1440 Ultra 38
3840x2160 High 21
3840x2160 Low 41
3840x2160 Medium 29
3840x2160 Ultra 20

Performance Analysis: Pc Building Simulator on Your System

FAQ

Q: Can this CPU and GPU combination run Pc Building Simulator at 1080p?

A: Yes. At 1920x1080, the combination delivers playable frame rates across Low (125 FPS), Medium (88 FPS), and High (62 FPS) presets. Ultra also averages 59 FPS, which is just below the 60 FPS playable threshold.

Q: What is the best resolution for this combo?

A: The data shows 1920x1080 is the only resolution where multiple presets clear the 60 FPS threshold. At 2560x1440, only Low settings reach playable performance with 79 FPS. At 3840x2160, no preset achieves 60 FPS; the highest average is 41 FPS on Low.

Q: How does the Intel Arc B390 compare to its closest GPU rivals?

A: The Arc B390 scores 1482 in the 3DMark Steel Nomad DX12 test. It sits 1.3% ahead of the NVIDIA GeForce GT 520MX (1463), 1.5% ahead of the GeForce 800M (1460), 2.5% ahead of the GT 625 OEM (1446), and 2.7% ahead of the GT 710 (1443). The GPU places in the 9th percentile of all GPUs in the database.

Q: What settings should I use for 1440p gaming?

A: At 2560x1440, Low settings are the only playable option, delivering 79 FPS average. Medium drops to 56 FPS (with minimums of 47 FPS), High averages 39 FPS, and Ultra averages 38 FPS. None of the higher presets hold a consistent 60 FPS.

Q: Is the CPU or GPU the limiting factor for this game?

A: The benchmark data indicates the GPU is the primary constraint. The Intel Core i9-14900K ranks in the 95th percentile of all CPUs with an average benchmark score of 79097, while the Arc B390 ranks only in the 9th percentile of GPUs. The large performance gap between the two components points to the GPU as the bottleneck.

Q: What is the combo's overall ranking among tested systems?

A: This combination ranks 3310 out of 3723 tested combos for Pc Building Simulator. That places it in the lower portion of the database, which aligns with the GPU's low percentile standing.

Similar Performance Alternatives

Looking at the nearest rivals in the database helps clarify what hardware behaves like this pairing. On the CPU side, the Intel Core i9-14900K has an average benchmark score of 79097. Its closest competitor is the Intel Core i9-14900KF, which scores 79371, a difference of -0.3%. The Intel Core Ultra 9 290HX Plus scores 79574 (-0.6%), and the AMD EPYC 7413 scores 80041 (-1.2%). On the other side, the AMD Ryzen AI Max+ 395 scores 77740, which is 1.7% lower than the i9-14900K. In practical terms, swapping to any of these CPUs would produce nearly identical frame rates in Pc Building Simulator, since the differences are all within roughly two percent.

For the GPU side, the situation is more telling. The Intel Arc B390 scores 1482 in 3DMark Steel Nomad DX12. Its nearest rivals are all NVIDIA parts from the entry-level segment: the GeForce GT 520MX (1463, 1.3% slower), GeForce 800M (1460, 1.5% slower), GeForce GT 625 OEM (1446, 2.5% slower), and GeForce GT 710 (1443, 2.7% slower). These are not gaming-class accelerators by modern standards. The Arc B390's architecture is Xe3-LPG on a 3 nm process, with 1536 shading units, 48 TMUs, and 24 ROPs. It reports 7.680 TFLOPS FP32 performance and a boost clock of 2500 MHz. But the benchmark results place it in the 9th percentile of all GPUs, meaning it sits alongside decade-old integrated and low-end discrete parts in raw 3D performance.

For a builder considering alternatives, the key takeaway is that the CPU is not the limiting factor. Any of the four rival CPUs listed would perform essentially the same in this game. The GPU, however, has no close rival that would offer meaningfully better frame rates. The nearest rivals are all slower, so if the goal is higher FPS, the upgrade path would require moving well beyond the Arc B390's performance class. In terms of measured behavior, this combo behaves like a system with a very strong CPU paired with a very weak GPU, which is the opposite of what most gaming builds target.

How This Combo Ranks

The database ranks this combination at 3310 out of 3723 tested combos for Pc Building Simulator. That places it in roughly the bottom 11% of all systems tested. This ranking is consistent with the component-level data. The CPU is a top-tier part, but the GPU's 9th percentile standing drags the overall gaming performance down.

To interpret this ranking properly, consider what it means for actual gameplay. At 1080p, the system manages to clear 60 FPS on three presets, which is enough for smooth play on a standard monitor. But at 1440p, only Low settings remain playable, and at 4K, no preset reaches the threshold. The ranking reflects this reality: the combo can run the game, but only under specific conditions and with reduced visual quality at higher resolutions.

The gap between the CPU's 95th percentile and the GPU's 9th percentile is stark. In a game like Pc Building Simulator, which is not known for demanding graphics, the GPU still becomes the bottleneck. The measured frame rates show a clear ceiling: 125 FPS at 1080p Low, but only 41 FPS at 4K Low. That scaling pattern is typical of a GPU-bound scenario, where increasing pixel count has a dramatic effect on performance.

The Verdict

Can this PC run Pc Building Simulator? The answer depends on the resolution and settings you target.

At 1920x1080, the system is fully playable. High settings deliver 62 FPS average, Medium delivers 88 FPS, and Low delivers 125 FPS. Ultra averages 59 FPS, which is one frame short of the 60 FPS threshold, so it is not officially marked as playable, but it is borderline. For a 60 Hz monitor, High settings are the recommended choice, as they clear 60 FPS while offering better visual quality than Medium or Low.

At 2560x1440, the system can run the game, but only on Low settings, which produce 79 FPS average. Medium drops to 56 FPS, and High and Ultra both sit in the high 30s. If you have a 1440p monitor, you will need to accept Low settings for a smooth experience.

At 3840x2160, the system cannot maintain 60 FPS at any preset. Low settings average 41 FPS, Medium 29 FPS, High 21 FPS, and Ultra 20 FPS. The verdict for 4K is straightforward: this combo is not suitable for 4K gaming in this title.

The playable settings summary from the database confirms this: at 1080p, High, Medium, and Low are playable; at 1440p, only Low is playable; at 4K, no settings are playable. The best result across all resolutions and presets is 125 FPS at 1080p Low, and the most visually demanding playable setup is 1080p High at 62 FPS.

CPU and GPU Roles

The data shows a clear division of labor in this combo. The Intel Core i9-14900K is a 24-core, 32-thread processor with a 6.00 GHz boost clock and 36 MB of L3 cache. It scores 39399.5 in Cinebench R23 multicore and 2262.5 in single-core, placing it in the 95th percentile of all CPUs. The Arc B390, by contrast, is an integrated-class GPU with 1536 shading units and a 3DMark Steel Nomad score of 1482, placing it in the 9th percentile.

For Pc Building Simulator, the GPU dominates the performance picture. Look at the frame rate scaling across resolutions. At 1080p Low, the system hits 125 FPS. Moving to 1440p Low, it drops to 79 FPS, a 37% reduction. Moving to 4K Low, it drops to 41 FPS, another 48% reduction. This steep scaling with resolution is the signature of a GPU-bound workload. If the CPU were the bottleneck, the frame rates would stay relatively flat as resolution increases, because the CPU work per frame would not change much.

The preset scaling tells the same story. At 1080p, going from Low to Medium costs 37 FPS (125 to 88), and from Medium to High costs another 26 FPS (88 to 62). At 1440p, the same preset steps cost 23 FPS and 17 FPS respectively. These are large drops for visual quality changes, again pointing to the GPU as the limiting factor.

The CPU's role here is to feed the GPU with enough data, which it does easily. The i9-14900K's single-thread performance (2262.5 in Cinebench R23 single-core) is far beyond what this game needs. Even at 1080p Low with 125 FPS, the CPU is not the constraint. The database's CPU benchmarks confirm this: the i9-14900K outperforms its nearest rivals by small margins, and all of them would produce similar results in this game.

For builders, the implication is simple. If you want to improve performance in this game, upgrading the GPU is the only meaningful path. Swapping the CPU for a different high-end part would change nothing measurable. The Arc B390 is the weak link, and its 9th percentile standing means you would need to move several GPU tiers up to see a significant FPS increase.

Best Settings per Resolution

The database provides specific measured frame rates for each resolution and preset. Here are the most demanding settings that keep the average FPS at or above 60.

1920x1080: High settings are the best playable option, with an average of 62 FPS. This is the highest preset that clears the 60 FPS threshold. Medium runs faster at 88 FPS, and Low at 125 FPS, but High offers the best visual quality while maintaining smooth gameplay. Ultra averages 59 FPS, just below the threshold, so it is not recommended for consistent 60 FPS play.

2560x1440: Low settings are the only playable option, averaging 79 FPS. Medium drops to 56 FPS, which is below the 60 FPS threshold, and High (39 FPS) and Ultra (38 FPS) are far off. If you are on a 1440p monitor, Low is the settings level to use. The frame rate is well above 60, so there is headroom, but the next preset up is not playable.

3840x2160: No settings are playable at 4K. The best result is Low at 41 FPS, followed by Medium at 29 FPS, High at 21 FPS, and Ultra at 20 FPS. Even the lowest preset falls well short of the 60 FPS threshold, so this resolution should be avoided with this combo.

The measured minimum frame rates reinforce these recommendations. At 1080p Medium, the minimum is 75 FPS, which is still above the threshold. At 1440p Medium, the minimum drops to 47 FPS, confirming that this preset is not consistently smooth. The 4K Medium preset shows a minimum of 25 FPS, which would feel stuttery in gameplay.

In summary, this combo is a 1080p machine for Pc Building Simulator. High settings at 1080p give the best balance of visual quality and performance. If you want to play at 1440p, you must drop to Low settings. 4K is not viable at any quality level.