Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

76%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
205 FPS
Ultra 1080p Measured
98 FPS

1440p (2K / QHD)

Low 1440p Measured
129 FPS
Ultra 1440p Measured
62 FPS

4K (Ultra HD)

Low 4K Measured
68 FPS
Ultra 4K Measured
32 FPS
9.8ms Frame Time
15ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 53,620
Graphics Card
Required 27,436
Your GPU 15,290

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 34 48 68
1440p QHD 62 65 92 129
1080p Full HD 98 102 145 205

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 102
1920x1080 Low 205
1920x1080 Medium 145
1920x1080 Ultra 98
2560x1440 High 65
2560x1440 Low 129
2560x1440 Medium 92
2560x1440 Ultra 62
3840x2160 High 34
3840x2160 Low 68
3840x2160 Medium 48
3840x2160 Ultra 32

Performance Analysis: Pc Building Simulator on Your System

Measured FPS Breakdown

The recorded data for Pc Building Simulator with the Intel Core i7-14700F and NVIDIA GeForce RTX 2060 shows a wide spread of performance depending on resolution and quality preset. At 1920x1080, the system is overwhelmingly fast. The Low preset delivers an average of 205 FPS, which is more than three times the 60 FPS playable threshold. Medium drops to 145 FPS on average, with a minimum of 123 FPS and a maximum of 167 FPS. High sits at 102 FPS average, while Ultra, the most demanding preset, still holds an average of 98 FPS. No minimum or maximum values were recorded for Low, High, or Ultra at this resolution, but the averages alone confirm that every preset clears the playable bar with substantial headroom.

Moving to 2560x1440, the picture remains strong but less extreme. Low produces 129 FPS average, Medium drops to 92 FPS with a 78 FPS minimum and 105 FPS maximum, High delivers 65 FPS, and Ultra maintains 62 FPS. The gap between Medium and High is 27 FPS, while the gap between High and Ultra is only 3 FPS, indicating diminishing returns at the top end. All four settings at 1440p stay above 60 FPS, but the margin at Ultra is thin. The 62 FPS average leaves only 2 FPS of buffer above the playable threshold, so any scene with heavier load could dip below 60.

At 3840x2160, performance collapses relative to lower resolutions. Low is the only playable preset, averaging 68 FPS. Medium drops to 48 FPS average with a 41 FPS minimum and 55 FPS maximum, High falls to 34 FPS, and Ultra bottoms out at 32 FPS. The step from Low to Medium is a 20 FPS loss, while Medium to High costs another 14 FPS. High and Ultra are nearly identical, separated by just 2 FPS, which suggests the GPU is fully saturated at that point. The 4K Ultra result of 32 FPS is less than one-third of the 1080p Ultra result of 98 FPS, a stark illustration of how resolution scaling taxes this hardware.

CPU and GPU Roles

The data indicates that Pc Building Simulator is primarily GPU-bound at higher resolutions, while the CPU has enough headroom to avoid becoming a bottleneck even at 1080p. The Intel Core i7-14700F is a 20-core, 28-thread part with a boost clock of 5.40 GHz, and its benchmark scores place it in the 91st percentile of all CPUs. In Cinebench R23, it scores 35122 multi-core and 4958 single-core. Those numbers suggest the processor can feed the RTX 2060 without constraint in a simulation game, which typically relies on single-thread performance for game logic and physics.

The RTX 2060, by contrast, sits in the 58th percentile of all GPUs with a PassMark G3D score of 14111. Its 6 GB of GDDR6 memory and 336.0 GB/s bandwidth are modest by modern standards. The scaling between resolutions confirms the GPU is the limiting factor. At 1080p, the average FPS across presets ranges from 98 to 205, showing that the GPU can keep up with even the lightest settings. At 1440p, the range tightens to 62 to 129, and at 4K it narrows to 32 to 68. This progressive compression of FPS as resolution rises is the classic signature of a GPU bottleneck.

The CPU's role becomes clearer when comparing the FPS deltas between presets at the same resolution. At 1080p, the difference between Low and Ultra is 107 FPS. At 1440p, that same difference is 67 FPS. At 4K, it is only 36 FPS. If the CPU were the limiting factor, those gaps would remain constant regardless of resolution, since the CPU workload does not change with pixel count. Instead, the gaps shrink as resolution climbs, meaning the GPU is running out of headroom before the CPU can flex its full capability. The i7-14700F's Cinebench R15 single-core score of 499 and R20 single-core score of 2082 reinforce that it has ample single-thread power for this genre.

One nuance from the data is that even at 4K, the CPU is not completely idle. The jump from 32 FPS at Ultra to 68 FPS at Low shows that lowering graphical load still yields higher frame rates, which means the GPU remains the primary constraint. However, the fact that 4K Low only reaches 68 FPS, versus 205 FPS at 1080p Low, indicates the GPU is heavily strained by pixel throughput. For this pairing, the CPU is a supporting actor, and the RTX 2060 dictates the ceiling.

Best Settings per Resolution

At 1920x1080, the Ultra preset is the best choice because it delivers 98 FPS average, well above the 60 FPS playable threshold. There is no reason to sacrifice visual quality at this resolution, as even the most demanding setting clears the bar by 38 FPS. The Medium preset at 145 FPS and High at 102 FPS are also playable, but Ultra offers the highest fidelity without dropping below the threshold.

At 2560x1440, the Ultra preset remains the best option, with an average of 62 FPS. This is a narrow margin, only 2 FPS above the playable threshold, but it is still technically playable. The High preset at 65 FPS is essentially tied with Ultra and offers a slightly more comfortable buffer. Given the data, either High or Ultra works, but the verdict field designates Ultra as the best settings. Players who prioritize frame stability might prefer High, since the 3 FPS difference is trivial, but the recorded measurements show Ultra clears 60 FPS.

At 3840x2160, the Low preset is the only playable option, averaging 68 FPS. The Medium preset falls to 48 FPS, which is below the threshold, and High and Ultra are even worse at 34 FPS and 32 FPS respectively. Therefore, Low is the best settings at 4K. The jump from Low to Medium is a 20 FPS loss, which is a steep price for a modest visual improvement, so 4K players should stick with Low to maintain playability.

The Verdict

The data shows that this PC can run Pc Building Simulator, but only under specific conditions. At 1920x1080, every preset is playable, with the Ultra setting averaging 98 FPS. This is the ideal resolution for this hardware, offering both high fidelity and smooth performance. At 2560x1440, all four presets also clear 60 FPS, with Ultra at 62 FPS. This is a viable option, though the margin is slim enough that frame drops could occur in busy scenes.

At 3840x2160, the system struggles. The Low preset is the only playable setting, averaging 68 FPS. Medium, High, and Ultra all fall below 60 FPS, with averages of 48, 34, and 32 FPS respectively. The verdict field confirms this: 4K playable settings include only Low, while 1440p and 1080p include all four presets. The overall combo rank of 2936 out of 3723 combos places this pairing in the lower-middle range for this game, which aligns with the mixed resolution results.

For a 1080p monitor, this is a strong performer. For a 1440p monitor, it is adequate with no headroom on Ultra. For 4K, it is only playable on the lowest settings. The RTX 2060's 6 GB memory and 58th percentile standing are the limiting factors, while the i7-14700F's 91st percentile CPU score ensures the processor is never the weak link. The verdict is clear: play at 1080p for the best experience, use 1440p with caution, and avoid 4K beyond Low.

Similar Performance Alternatives

The nearest rivals for the Intel Core i7-14700F, based on average benchmark scores, include the Intel Xeon 6505P with an average score of 53701 and a delta of -0.2%, the Intel Xeon Phi 7290 at 53469 with a delta of 0.3%, the AMD Ryzen 9 7900X at 53288 with a delta of 0.6%, and the AMD EPYC 7313P at 53206 with a delta of 0.8%. These processors all sit within 1% of the i7-14700F's average score of 53620, meaning any of them would provide nearly identical CPU performance in Pc Building Simulator. The Ryzen 9 7900X is the most likely consumer alternative, offering similar multi-core capability for gamers.

For the NVIDIA GeForce RTX 2060, the nearest rivals are the NVIDIA GeForce GTX 580 with an average score of 15283 and a delta of 0%, the AMD Radeon 680M at 15270 with a delta of 0.1%, the NVIDIA GeForce RTX 3050 OEM at 15199 with a delta of 0.6%, and the AMD Radeon RX 7600 at 15171 with a delta of 0.8%. The GTX 580 is a much older card, but its benchmark parity means it would deliver similar FPS in this game. The RTX 3050 OEM and RX 7600 are more modern equivalents, and the Radeon 680M is an integrated GPU that surprisingly matches the RTX 2060's average score. In practice, any of these would produce similar results at the tested resolutions, so a user swapping the RTX 2060 for a RTX 3050 OEM or RX 7600 would see little change in Pc Building Simulator.

The delta values are all within 0.8%, which is negligible in real-world gaming. This means the i7-14700F and RTX 2060 combination is not unique in its performance class. A system with a Ryzen 9 7900X and an RX 7600 would likely produce nearly identical frame rates at every preset and resolution, based on these benchmark scores. The measured FPS data for this specific combo should generalize to those alternatives with minimal deviation.

FAQ

Q: Can this PC run Pc Building Simulator at 60 FPS on 1920x1080 with Ultra settings?

A: Yes. The recorded average FPS at 1080p Ultra is 98, which is well above the 60 FPS playable threshold.

Q: Is the RTX 2060 capable of 4K gaming in this title?

A: Only on Low settings. The 4K Low preset averages 68 FPS, while Medium drops to 48 FPS, High to 34 FPS, and Ultra to 32 FPS.

Q: Which component is the bottleneck for this game?

A: The GPU. The RTX 2060 sits in the 58th percentile of all GPUs, while the i7-14700F is in the 91st percentile of CPUs. The FPS gaps between presets shrink as resolution rises, which indicates GPU saturation.

Q: What is the best settings preset at 2560x1440?

A: Ultra, which averages 62 FPS. High is close at 65 FPS, but the verdict field designates Ultra as the best settings.

Q: How does the i7-14700F compare to the AMD Ryzen 9 7900X?

A: They are nearly identical. The Ryzen 9 7900X has an average benchmark score of 53288, which is 0.6% lower than the i7-14700F's 53620.

Q: What GPU alternatives perform like the RTX 2060 in this game?

A: The RTX 3050 OEM and AMD Radeon RX 7600 are close matches, with average scores of 15199 and 15171 respectively, both within 0.8% of the RTX 2060's 15290.