Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 63 | 67 | 94 | 131 |
| 1440p QHD | 121 | 127 | 178 | 251 |
| 1080p Full HD | 187 | 197 | 281 | 396 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
This analysis evaluates the Intel Core i7-13700K and NVIDIA GeForce RTX 5070 combination specifically for Pc Building Simulator, based on measured benchmark data. The data indicates this is a high-performing pairing for this title, ranking 613th out of 3723 tested combinations, placing it in the top percentile of systems. All benchmark results confirm that this setup delivers playable frame rates across every tested resolution and preset.
Similar Performance Alternatives
The Intel Core i7-13700K sits in a performance tier where its nearest rivals produce nearly identical average benchmark scores. The AMD Ryzen 9 5900 is the closest match, with an average score of 46971 against the Intel chip’s 46881, a negligible delta of -0.2%. The AMD Ryzen AI 9 HX PRO 375 follows closely at 47022, just 0.3% ahead. On the other side, the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 both trail by a mere 0.5%, with scores of 46654 and 46653 respectively. In practical terms, any of these processors would deliver indistinguishable performance in Pc Building Simulator, given the game’s modest CPU demands.
For the GPU, the RTX 5070’s nearest rivals are surprisingly older workstation-class cards. The AMD Radeon Pro 580 posts an average score of 40318, just 0.1% below the RTX 5070’s 40377. The AMD Radeon Pro WX 7100 is 0.8% behind at 40063, while the AMD Radeon Pro 5300 actually scores slightly higher at 40870, putting it 1.2% ahead. The NVIDIA RTX A500 Mobile trails by 2% with a score of 39568. These deltas are small enough that in a simulation game like Pc Building Simulator, the user would not perceive any difference between these GPUs. However, the RTX 5070’s modern feature set and driver support make it the more sensible choice for a new build.
CPU and GPU Roles
The benchmark data reveals that Pc Building Simulator is overwhelmingly GPU-bound at every resolution. This becomes clear when examining the performance scaling across resolutions. At 1080p with Ultra settings, the system produces 186.8 FPS. Moving to 1440p Ultra drops this to 120.7 FPS, a reduction of roughly 35%. At 4K Ultra, the frame rate falls further to 62.8 FPS, another 48% drop from 1440p. This steep scaling with resolution is the classic signature of a GPU-limited workload.
The CPU’s role is secondary but not irrelevant. The Core i7-13700K’s strong single-thread performance, evidenced by its 3dmark_single_thread score of 1136 and PassMark single-thread score of 4333, ensures that the game’s simulation logic never becomes a bottleneck. The processor’s 16 cores and 24 threads are far more than this game requires, but the high boost clock of 5.40 GHz helps maintain consistent frame pacing. At lower resolutions, particularly 1080p, the CPU’s capability becomes more relevant as the GPU is less burdened, but the data shows the GPU still dominates the performance curve.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 62.8 FPS. This is a narrow margin above the 60 FPS threshold, but it is playable. For users who prefer more headroom, High settings at 4K produce 67.3 FPS, while Medium reaches 94.2 FPS and Low hits 131.4 FPS.
At 2560x1440, the system has ample performance to run Ultra settings at 120.7 FPS average. High settings yield 127 FPS, Medium reaches 178 FPS, and Low produces 251 FPS. The 1440p Ultra result is more than double the 60 FPS threshold, providing a smooth experience with plenty of overhead for background tasks.
At 1920x1080, Ultra settings run at 186.8 FPS average, which is the clear choice for maximum visual fidelity. High settings deliver 197.3 FPS, Medium hits 280.9 FPS, and Low reaches 395.8 FPS. Even the most demanding preset at 1080p is nowhere near the playability limit.
The Verdict
This PC can run Pc Building Simulator exceptionally well at all tested resolutions. The verdictByResolution data confirms that every resolution and preset combination is playable, meaning all average frame rates are at or above the 60 FPS threshold. At 4K, the best playable setting is Ultra with 62.8 FPS average, which clears the threshold by a small but real margin. At 1440p, Ultra runs at 120.7 FPS, and at 1080p, Ultra runs at 186.8 FPS.
The practical takeaway is that users with a 4K monitor can max out the game’s settings and still maintain a playable frame rate, though the margin is slim. For 1440p and 1080p displays, the system has overwhelming performance headroom, making it suitable for high-refresh-rate monitors. The RTX 5070’s 12 GB of GDDR7 memory on a 192-bit bus with 672.0 GB/s bandwidth is more than sufficient for this game’s textures and geometry. The Core i7-13700K’s 30 MB of shared L3 cache and 16 cores ensure the simulation aspects of the game run without hitches.
Measured FPS Breakdown
At 1920x1080, the measured average frame rates are as follows: Low settings produce 395.8 FPS, Medium delivers 280.9 FPS, High achieves 197.3 FPS, and Ultra runs at 186.8 FPS. The gap between High and Ultra is relatively small at about 10 FPS, suggesting that the Ultra preset’s additional visual effects have a modest performance cost at this resolution.
At 2560x1440, the scaling is consistent: Low yields 251 FPS, Medium drops to 178 FPS, High reaches 127 FPS, and Ultra produces 120.7 FPS. The jump from 1080p to 1440p reduces frame rates by roughly 36% across all settings, which is a typical penalty for the increased pixel count.
At 3840x2160, the frame rates are substantially lower but still playable: Low produces 131.4 FPS, Medium drops to 94.2 FPS, High achieves 67.3 FPS, and Ultra runs at 62.8 FPS. The transition from 1440p to 4K cuts performance by about 48% on average, which aligns with the fourfold increase in pixel count relative to 1080p. Notably, the delta between High and Ultra at 4K is only about 4.5 FPS, making Ultra the obvious choice for users with capable displays.
FAQ
Q: Can this system run Pc Building Simulator at 4K Ultra settings?
A: Yes. The measured average frame rate at 3840x2160 with Ultra settings is 62.8 FPS, which is above the 60 FPS playability threshold.
Q: What is the best setting for 1440p gaming?
A: Ultra settings at 2560x1440 deliver an average of 120.7 FPS, making it the best choice for maximum visual quality while still maintaining a high frame rate.
Q: How does the CPU compare to its nearest rival in synthetic benchmarks?
A: The Intel Core i7-13700K scores 46881 on average, which is 0.2% behind the AMD Ryzen 9 5900’s 46971 and 0.5% ahead of the AMD Ryzen 9 7845HX’s 46654.
Q: Is the RTX 5070 significantly faster than its closest GPU rivals in this game?
A: No. The RTX 5070’s average score of 40377 is within 2% of its nearest rivals, including the AMD Radeon Pro 580 at 40318 and the AMD Radeon Pro 5300 at 40870.
Q: What frame rate can I expect at 1080p with High settings?
A: The measured average FPS at 1920x1080 with High settings is 197.3 FPS, which is well above the threshold for smooth gameplay on high-refresh-rate monitors.
Q: Does the system have enough performance headroom at 4K for demanding scenes?
A: The Ultra preset at 4K averages 62.8 FPS, leaving only 2.8 FPS of headroom above the 60 FPS threshold. High settings at 67.3 FPS provide slightly more margin if needed.