Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

94%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
281 FPS
Ultra 1080p Measured
133 FPS

1440p (2K / QHD)

Low 1440p Measured
175 FPS
Ultra 1440p Measured
84 FPS

4K (Ultra HD)

Low 4K Measured
94 FPS
Ultra 4K Measured
42 FPS
6.9ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 46,881
Graphics Card
Required 27,436
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 47 67 94
1440p QHD 84 87 126 175
1080p Full HD 133 144 202 281

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 144
1920x1080 Low 281
1920x1080 Medium 202
1920x1080 Ultra 133
2560x1440 High 87
2560x1440 Low 175
2560x1440 Medium 126
2560x1440 Ultra 84
3840x2160 High 47
3840x2160 Low 94
3840x2160 Medium 67
3840x2160 Ultra 42

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 5060 ranks 1809th out of 3723 tested combos for Pc Building Simulator, placing it in the upper-middle portion of the database. This position reflects a system that is far from the top of the charts but still well within the range of hardware capable of delivering smooth gameplay, particularly at conventional gaming resolutions. The data shows that this combination sits above roughly half of all recorded configurations, with the CPU holding an 89th percentile rank among all processors and the GPU at a 72nd percentile among all graphics cards, indicating a balanced pairing where neither component is drastically holding the other back.

How This Combo Ranks

The combo’s overall rank of 1809 out of 3723 tested combinations places it in the 48.6th percentile of all system pairings tested for this game. This mid-pack standing is somewhat surprising given the individual component strength, but it makes sense when considering the nature of Pc Building Simulator, a simulation title that does not demand top-tier graphics hardware to achieve playable frame rates. The Intel Core i7-13700K’s average benchmark score of 46881 places it in the 89th percentile among all CPUs, while the RTX 5060’s average score of 26331 puts it in the 72nd percentile among all GPUs. The CPU is clearly the stronger half of this pairing on paper, yet the measured frame rates show that the GPU is sufficient to keep the system moving at high speeds in most scenarios.

What this rank means in practice is that this combo will outperform a significant number of systems with more expensive or newer hardware, but it will also lag behind configurations built around flagship GPUs or top-tier CPUs. The data indicates that the bottleneck in this pairing is almost always the GPU, as the CPU’s high multithreaded performance—evidenced by a Cinebench R23 multi-core score of 30745 and a Passmark multithread score of 45887—provides ample headroom for the game’s simulation logic. The rank of 1809 suggests that users with this combo will have a smooth experience in Pc Building Simulator, but they should not expect to max out every setting at 4K resolution without compromise.

CPU and GPU Roles

The division of labor between the Intel Core i7-13700K and the RTX 5060 shifts noticeably as resolution and preset levels change. At 1920x1080, the CPU’s strength becomes the dominant factor, as the GPU has less work to do per frame. The measured data shows that at 1080p Low settings, the combo achieves 280.5 FPS, while moving to Ultra still yields 132.6 FPS, a drop of 147.9 FPS. This indicates that even at the highest preset, the RTX 5060 is not being pushed to its limits, and the CPU’s 16 cores and 24 threads are keeping the simulation logic fed without becoming a limiting factor. The CPU’s single-thread performance, with a 3DMark single-thread score of 1136 and a Geekbench single-core score of 2529, ensures that the game’s primary thread never becomes a bottleneck.

At 2560x1440, the balance starts to shift. The average frame rate at Low settings is 175.4 FPS, which drops to 83.8 FPS at Ultra. The percentage drop from Low to Ultra is 52.2%, whereas at 1080p the drop is 52.7%, showing a nearly identical scaling pattern. This suggests that the GPU is beginning to take on more responsibility, but the CPU still has enough headroom to maintain high frame rates. The RTX 5060’s 8 GB of GDDR7 memory and 448.0 GB/s of bandwidth are sufficient for this resolution, and the card’s 19.18 TFLOPS of FP32 performance allows it to handle the increased pixel count without collapsing.

At 3840x2160, the GPU becomes the clear limiting factor. The average frame rate at 4K Low is 93.8 FPS, but this falls to 46.8 FPS at High and 41.5 FPS at Ultra. The drop from Low to Ultra is 55.8%, which is steeper than at lower resolutions. This indicates that the RTX 5060 is struggling to keep up with the 4K pixel workload, and the CPU’s performance is no longer the primary constraint. The data shows that at 4K, the combo can only maintain playable frame rates at Low and Medium settings, with Medium averaging 67.3 FPS. The scaling between resolutions is clear: at 1080p and 1440p, the CPU matters more for maintaining high frame rates, but at 4K, the GPU’s raw throughput becomes the deciding factor.

FAQ

Q: Can this PC run Pc Building Simulator at 1920x1080 with maximum settings?

A: Yes. At 1920x1080 with Ultra settings, the combo achieves an average of 132.6 FPS, which is well above the 60 FPS playable threshold. All four tested presets—Low, Medium, High, and Ultra—clear 60 FPS at this resolution.

Q: What is the highest playable setting at 2560x1440?

A: The highest playable setting at 2560x1440 is Ultra, which delivers an average of 83.8 FPS. This is above the 60 FPS threshold, and every preset from Low to Ultra remains playable at this resolution.

Q: At 3840x2160, which presets are playable?

A: At 3840x2160, only Low and Medium presets are playable. Low averages 93.8 FPS and Medium averages 67.3 FPS. High averages 46.8 FPS and Ultra averages 41.5 FPS, both falling below the 60 FPS threshold.

Q: How does the CPU compare to its nearest rivals in raw performance?

A: The Intel Core i7-13700K has an average benchmark score of 46881. Its closest rival, the AMD Ryzen 9 5900, scores 46971, which is 0.2% higher. The AMD Ryzen AI 9 HX PRO 375 scores 47022, which is 0.3% higher, while the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 score 46654 and 46653, respectively, both 0.5% lower.

Q: What is the GPU’s performance position relative to similar cards?

A: The RTX 5060 has an average benchmark score of 26331. The AMD Radeon 860M scores 26401, which is 0.3% higher, and the NVIDIA GeForce MX550 scores 26421, also 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary scores 26553, 0.8% higher, while the AMD Radeon RX 6750 XT scores 26011, 1.2% lower.

Q: Is there any scenario where this combo fails to reach 60 FPS?

A: Yes. At 3840x2160 with High settings, the average frame rate is 46.8 FPS, and at Ultra it is 41.5 FPS. Both fall short of the 60 FPS target, meaning users must stick to Low or Medium presets at 4K.

Similar Performance Alternatives

The CPU’s nearest rivals provide a clear picture of what other processors would deliver nearly identical performance in this system. The AMD Ryzen 9 5900 scores 46971 on average, just 0.2% higher than the i7-13700K’s 46881, making it a direct substitute in terms of raw compute capability. The AMD Ryzen AI 9 HX PRO 375 is similarly close at 47022, 0.3% higher, while the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 both score within 0.5% lower, at 46654 and 46653 respectively. For a user swapping the CPU to any of these parts, the frame rates in Pc Building Simulator would remain statistically indistinguishable, as the game is not heavily dependent on CPU scaling beyond a certain point.

On the GPU side, the RTX 5060’s nearest rivals are more varied in their market positioning. The AMD Radeon 860M scores 26401, 0.3% higher, and the NVIDIA GeForce MX550 scores 26421, also 0.3% higher, both suggesting that these parts would deliver nearly the same graphics performance. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% higher at 26553, while the AMD Radeon RX 6750 XT is 1.2% lower at 26011. These deltas are all within a narrow band, meaning that swapping the RTX 5060 for any of these cards would result in virtually identical frame rates across all resolutions and presets in this game. Users with these alternative GPUs should expect the same 4K limitations, where High and Ultra presets fall below 60 FPS.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance. Low settings produce an average of 280.5 FPS, Medium yields 202 FPS, High hits 143.8 FPS, and Ultra remains highly playable at 132.6 FPS. The gap between Low and Ultra is 147.9 FPS, showing that even at the most demanding preset, the system retains more than double the 60 FPS threshold. The data shows a consistent scaling pattern, with each step up in preset reducing the frame rate by a significant but manageable margin.

At 2560x1440, the averages remain strong. Low settings produce 175.4 FPS, Medium drops to 126.1 FPS, High comes in at 87.3 FPS, and Ultra maintains 83.8 FPS. The difference between High and Ultra is only 3.5 FPS, suggesting that the GPU is hitting a performance plateau at this resolution. All four presets clear 60 FPS, with Ultra still providing a comfortable margin of 23.8 FPS above the playable threshold.

At 3840x2160, the performance picture changes dramatically. Low settings average 93.8 FPS, Medium drops to 67.3 FPS, High falls to 46.8 FPS, and Ultra bottoms out at 41.5 FPS. The step from Medium to High represents a 30.5% reduction in frame rate, while the step from Low to Medium is a 28.3% reduction. Only Low and Medium meet the 60 FPS target, and Medium’s margin is just 7.3 FPS, leaving little headroom for demanding scenes. No min or max FPS values were recorded in the data, so the analysis relies solely on average performance.

The Verdict

The data clearly shows that this combo can run Pc Building Simulator successfully at 1920x1080 and 2560x1440 with any preset, as all tested configurations exceed the 60 FPS threshold. At 1080p, the worst-case scenario is Ultra at 132.6 FPS, which is more than double the playable threshold. At 1440p, Ultra still delivers 83.8 FPS, providing a comfortable buffer. At 3840x2160, the system is only partially playable: Low and Medium presets clear 60 FPS, with Medium averaging 67.3 FPS, but High and Ultra fall short at 46.8 FPS and 41.5 FPS, respectively.

The verdict by resolution is straightforward. For users with a 1080p or 1440p monitor, this PC will run Pc Building Simulator at maximum settings without any issues. For 4K users, the system can handle the game at Medium settings, but pushing to High or Ultra will result in noticeable frame rate drops below 60 FPS. The GPU is the limiting factor at 4K, while the CPU’s performance is sufficient across all tested scenarios. The combination of the i7-13700K’s high multithreaded score and the RTX 5060’s mid-range graphics power makes this a solid pairing for simulation games that prioritize CPU logic over raw GPU throughput.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which delivers an average of 132.6 FPS. This is the recommended setting for users prioritizing visual quality at this resolution, as the margin above the 60 FPS threshold is substantial.

At 2560x1440, the most demanding playable preset is also Ultra, with an average of 83.8 FPS. This provides a 23.8 FPS buffer over the playable threshold, making it a safe choice for consistent performance. Users could also opt for High at 87.3 FPS, but Ultra offers nearly the same performance with better visuals.

At 3840x2160, the most demanding preset that maintains 60 FPS is Medium, averaging 67.3 FPS. This is the only non-Low setting that clears the threshold at 4K, and the margin is relatively slim. Users seeking higher visual fidelity at 4K would need to accept frame rates below 60 FPS, as High averages 46.8 FPS and Ultra averages 41.5 FPS. For a balance of quality and performance at 4K, Medium is the clear choice, while Low at 93.8 FPS offers a higher frame rate for users who prioritize smoothness over detail.