Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
263 FPS
Ultra 1080p Measured
130 FPS

1440p (2K / QHD)

Low 1440p Measured
169 FPS
Ultra 1440p Measured
81 FPS

4K (Ultra HD)

Low 4K Measured
86 FPS
Ultra 4K Measured
41 FPS
7.5ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 35,365
Graphics Card
Required 27,436
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 41 42 65 86
1440p QHD 81 85 120 169
1080p Full HD 130 134 189 263

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 134
1920x1080 Low 263
1920x1080 Medium 189
1920x1080 Ultra 130
2560x1440 High 85
2560x1440 Low 169
2560x1440 Medium 120
2560x1440 Ultra 81
3840x2160 High 42
3840x2160 Low 86
3840x2160 Medium 65
3840x2160 Ultra 41

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i7-12700KF and NVIDIA GeForce RTX 4060 combination ranks 2001st out of 3723 tested combos for Pc Building Simulator, placing it in the upper-middle tier of all possible configurations. This pairing sits at the 85th percentile among all CPUs and the 61st percentile among all GPUs, indicating a system where the processor is notably stronger relative to its peer group than the graphics card. The measured frame rates confirm this is a highly capable simulation setup, with the system delivering playable performance at every tested resolution and preset combination, though the data reveals distinct boundaries at 4K where the GPU becomes the limiting factor.

FAQ

Q: Can this combo run Pc Building Simulator at 60 FPS on a 4K monitor?

A: Yes, but only at Low and Medium settings. The measured average at 3840x2160 Medium is 65.1 FPS, while Low reaches 86.1 FPS. High and Ultra presets fall below the 60 FPS threshold, with averages of 41.5 FPS and 41.4 FPS respectively.

Q: What is the best preset for 1440p gaming with this hardware?

A: The Ultra preset at 2560x1440 delivers an average of 80.6 FPS, which is the highest quality setting that remains comfortably above the 60 FPS playable threshold. All four tested presets (Low, Medium, High, Ultra) are playable at this resolution.

Q: How does the RTX 4060 compare to its nearest performance rivals?

A: The RTX 4060's average benchmark score of 17639 is nearly identical to the AMD Radeon HD 7790, which scores 17666 (a 0.2% difference). The AMD Radeon 780M trails by 0.3%, and the AMD Radeon Pro 560 and Pro 460 are 0.5% and 0.7% behind respectively. These are effectively performance peers.

Q: Is the CPU or GPU more important for achieving high frame rates at 1080p?

A: The data shows the GPU becomes less relevant at lower resolutions. At 1920x1080, the difference between Low (263.4 FPS) and Ultra (130 FPS) is 133.4 FPS, indicating the graphics card still has a significant impact. However, the CPU's 85th percentile ranking versus the GPU's 61st percentile suggests the processor has more headroom for future upgrades.

Q: What frame rate can be expected at 1080p with High settings?

A: The measured average at 1920x1080 High is 134.1 FPS. This is well above the 60 FPS playable threshold and represents a smooth experience for a simulation title.

Q: Does the RTX 4060 perform better in DirectX 11 or DirectX 12?

A: According to PassMark benchmarks, the GPU scores 175 in DirectX 11 tests and 76 in DirectX 12 tests. The DirectX 11 result is more than double the DirectX 12 score, suggesting better optimization for older APIs in synthetic testing.

Measured FPS Breakdown

At 1920x1080, the system demonstrates exceptional performance across all presets. The Low preset achieves an average of 263.4 FPS, while Medium reaches 189.3 FPS. High settings produce 134.1 FPS, and the Ultra preset maintains a strong 130 FPS average. Every setting at this resolution delivers more than double the 60 FPS playable threshold.

The 2560x1440 results show a predictable scaling pattern. Low settings average 169.2 FPS, Medium delivers 120.4 FPS, and High reaches 85.2 FPS. The Ultra preset at 80.6 FPS remains fully playable, with the gap between High and Ultra being relatively modest at 4.6 FPS. This resolution offers the best balance of visual quality and performance for this combination.

At 3840x2160, the performance curve becomes more pronounced. The Low preset averages 86.1 FPS, which is still comfortably playable. Medium settings drop to 65.1 FPS, barely clearing the 60 FPS threshold. High and Ultra presets fall to 41.5 FPS and 41.4 FPS respectively, indicating the GPU reaches its limit at 4K with higher quality settings. The difference between High and Ultra at this resolution is negligible at just 0.1 FPS.

The Verdict

This system can run Pc Building Simulator at 60 FPS or higher at all three tested resolutions, provided the appropriate settings are selected. At 1920x1080, every preset from Low to Ultra clears the threshold, with the Ultra preset delivering 130 FPS. The 2560x1440 resolution also supports all four presets, with Ultra achieving 80.6 FPS. The 3840x2160 resolution is more restrictive: only Low (86.1 FPS) and Medium (65.1 FPS) are playable. High and Ultra at 4K fall short at 41.5 FPS and 41.4 FPS respectively.

The playable threshold is defined as 60 FPS, and the data shows this combo exceeds it in 10 of 12 tested configurations. The only failures occur at 4K with High and Ultra settings. For users prioritizing maximum visual fidelity, 1440p Ultra is the highest quality setting that maintains a comfortable margin above the threshold. At 1080p, the system has substantial headroom, with even the most demanding preset running at more than double the minimum playable frame rate.

Similar Performance Alternatives

The Intel Core i7-12700KF has an average benchmark score of 35365, placing it within 0.2% of several comparable processors. The Intel Core i7-13700T scores 35403 (0.1% higher), while the Intel Core i5-13600T scores 35305 (0.2% lower). The Intel Core 5 213PE achieves 35428 (0.2% higher), and the Intel Core i7-12700K scores 35287 (0.2% lower). Any of these CPUs would produce nearly identical frame rates in Pc Building Simulator.

On the GPU side, the NVIDIA GeForce RTX 4060's average score of 17639 is matched closely by several AMD offerings. The AMD Radeon HD 7790 scores 17666 (0.2% higher), the AMD Radeon 780M scores 17588 (0.3% lower), the AMD Radeon Pro 560 scores 17551 (0.5% lower), and the AMD Radeon Pro 460 scores 17509 (0.7% lower). These GPUs would deliver virtually indistinguishable performance in this game.

The combination of a top-tier CPU with a mid-range GPU creates a system where the processor has significant headroom. Users upgrading from one of the rival CPUs listed above would see no measurable difference in this specific title. Similarly, swapping the RTX 4060 for any of its listed rivals would produce nearly identical frame rates, as the delta percentages are all below 1%.

Best Settings per Resolution

At 3840x2160, the most demanding preset that maintains at least 60 FPS is Medium, which delivers an average of 65.1 FPS. This provides a 5.1 FPS margin above the playable threshold. While Low achieves 86.1 FPS, Medium offers substantially better visual quality with only a 21 FPS penalty.

For 2560x1440, the Ultra preset is the best choice, averaging 80.6 FPS. This clears the 60 FPS threshold by 20.6 FPS, providing both maximum visual fidelity and a comfortable performance buffer. All lower presets are also playable, but none offer the same quality-to-performance ratio.

At 1920x1080, the Ultra preset delivers 130 FPS, which is the highest quality setting available and more than double the playable threshold. This makes 1080p Ultra the optimal configuration for this combo, offering the best visual experience with substantial performance headroom. The 70 FPS difference between Ultra and the next lower High preset (134.1 FPS) is minimal, confirming that Ultra is the appropriate choice.

CPU and GPU Roles

The data reveals a clear shift in component importance as resolution changes. At 1920x1080, the CPU's strength is more apparent: the system achieves 263.4 FPS at Low settings, suggesting the processor can feed frames far faster than the GPU can render them at higher quality settings. The scaling from Low to Ultra (263.4 FPS to 130 FPS) shows the GPU becoming the bottleneck as graphical load increases.

At 2560x1440, the balance changes. The Low preset still reaches 169.2 FPS, but the drop to Ultra (80.6 FPS) represents a 52.4% reduction. This indicates the GPU is taking on more responsibility as pixel count increases. The CPU's 85th percentile ranking versus the GPU's 61st percentile suggests the processor is not the limiting factor at this resolution.

The 3840x2160 results confirm the GPU's dominant role at 4K. The difference between Low (86.1 FPS) and Medium (65.1 FPS) is 21 FPS, while High (41.5 FPS) and Ultra (41.4 FPS) are nearly identical. This plateau at the higher presets indicates the GPU's memory bandwidth and processing capacity are fully saturated. The CPU, with its strong multi-threaded performance (28838 in Cinebench R23 multi-core), has ample headroom that goes unused at this resolution.

Across all resolutions, the scaling pattern shows that Pc Building Simulator is primarily GPU-bound at higher quality settings. The CPU's 12 cores and 20 threads provide sufficient processing power even at 1080p Low, where the 263.4 FPS result suggests the processor could handle even higher frame rates if the GPU were faster. Users considering upgrades should prioritize the GPU for 4K performance, while the CPU will remain relevant for several more generations.