Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 39 | 55 | 78 |
| 1440p QHD | 71 | 75 | 106 | 149 |
| 1080p Full HD | 113 | 118 | 168 | 237 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
Measured FPS Breakdown
The recorded data for Pc Building Simulator with the Intel Core i5-9400 and NVIDIA GeForce RTX 5050 covers three resolutions and four quality presets. At 1920x1080, the lowest resolution measured, the frame rates are exceptionally high across all settings. The Low preset produces an average of 237 FPS, which is nearly double the High preset's 118 FPS average. The Medium preset averages 168 FPS, with a minimum of 142 FPS and a maximum of 193 FPS. The Ultra preset, the most demanding setting, still averages 113 FPS, comfortably above the 60 FPS playability threshold. This resolution shows that the combination has substantial headroom, with even the heaviest settings delivering more than 100 FPS on average.
Moving to 2560x1440, the performance scales downward as expected, but remains strong. The Low preset averages 149 FPS, while Medium averages 106 FPS with a recorded minimum of 90 FPS and a maximum of 122 FPS. The High preset averages 75 FPS, and the Ultra preset averages 71 FPS. The gap between High and Ultra is small, only 4 FPS on average, which suggests diminishing returns from the most demanding settings at this resolution. All presets at 1440p stay above the 60 FPS threshold, indicating that this resolution is fully playable, though the margin at Ultra is narrower than at lower resolutions.
At 3840x2160, 4K resolution, the performance picture changes significantly. The Low preset averages 78 FPS, which is the only setting that comfortably exceeds 60 FPS. The Medium preset averages 55 FPS, with a minimum of 47 FPS and a maximum of 64 FPS, meaning it dips below the playability threshold during demanding scenes. The High preset averages 39 FPS, and the Ultra preset averages 37 FPS. These latter two settings are clearly not suitable for smooth gameplay at 4K, as they fall well short of the 60 FPS target. The data indicates a steep drop-off when moving from Medium to High at this resolution, a 16 FPS average decrease, which is the largest single-preset jump observed across all resolutions.
Best Settings per Resolution
For 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 113 FPS. This is noteworthy because it means the user can enable the highest quality settings without sacrificing smoothness. The minimum FPS for Ultra is not recorded, but the average is so far above the threshold that even substantial dips would likely remain playable.
At 2560x1440, the best settings are also Ultra, with an average of 71 FPS. This preset is the most demanding available, and it still clears the 60 FPS line by 11 FPS on average. The data suggests that 1440p Ultra is a viable option, though the margin is modest compared to 1080p. Players who prefer higher frame rates could drop to High at 75 FPS or Medium at 106 FPS, but the Ultra setting remains playable.
For 3840x2160, the situation is different. The only preset that stays at or above 60 FPS is Low, which averages 78 FPS. Medium falls short at 55 FPS, and High and Ultra are far below at 39 and 37 FPS respectively. This means that at 4K, the user must accept the Low preset to maintain smooth gameplay. The jump from Low to Medium costs 23 FPS on average, which is a steep price for the visual improvements that Medium might offer. The verdict data confirms this: at 4K, only Low is listed as playable, with an average FPS of 78.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component matters more for this game. At 1920x1080, the frame rates are extremely high, reaching 237 FPS on Low. Such high numbers suggest that the GPU is not the limiting factor at this resolution; instead, the CPU likely plays a more significant role in maintaining these frame rates. The Intel Core i5-9400 has 6 cores and 6 threads, with a base clock of 2.90 GHz and a boost clock of 4.10 GHz. Its Cinebench R23 multi-core score is 6629, and single-core is 935, which places it in the 47th percentile among all CPUs. These figures indicate a mid-range processor that can handle simulation games, but it may cap frame rates in lighter loads.
As the resolution increases to 2560x1440, the GPU begins to take on more responsibility. The frame rates drop by roughly 30-40% compared to 1080p across most presets, which is typical when pixel count increases. The fact that Ultra at 1440p still averages 71 FPS suggests the RTX 5050 has enough raw power to handle this resolution. The GPU's PassMark G3D score is 17326, and it sits in the 66th percentile among all GPUs. Its memory bandwidth is 320.0 GB/s, which is sufficient for 1440p gaming.
At 3840x2160, the GPU becomes the clear bottleneck. The drop from Medium at 55 FPS to High at 39 FPS is dramatic, indicating that the RTX 5050's 8 GB of GDDR6 memory and 128-bit bus width are stretched thin at 4K. The GPU's FP32 performance is 13.17 TFLOPS, which is respectable but not enough for high-end 4K gaming on demanding presets. The CPU's role at 4K diminishes because the GPU is overwhelmed; the i5-9400 likely has plenty of headroom, as evidenced by the fact that Low at 4K still reaches 78 FPS. This implies that if the GPU were stronger, the CPU could support higher frame rates even at 4K.
The data suggests a balanced pairing at 1080p and 1440p, where neither component is drastically underpowered relative to the other. At 4K, however, the GPU is the limiting factor, and the CPU's performance becomes secondary. The scaling between resolutions shows that Pc Building Simulator is more GPU-intensive at higher resolutions, but at lower resolutions, the CPU's single-thread performance, as indicated by its Geekbench single-core score of 1389, is sufficient to drive very high frame rates.
How This Combo Ranks
In the database of tested combinations for Pc Building Simulator, this specific pairing of the Intel Core i5-9400 and NVIDIA GeForce RTX 5050 ranks 2290 out of 3723 total combinations. This places it in the lower-middle portion of the ranking, around the 61st percentile. While the frame rates are playable at 1080p and 1440p, the ranking suggests that many other combinations deliver better overall performance in this game. The ranking is based on the combined capabilities of both components, and while the GPU is above average (66th percentile), the CPU is below average (47th percentile). The combination of a mid-tier CPU and an upper-mid-tier GPU results in a system that is competent but not exceptional.
The rank of 2290 out of 3723 means that approximately 1433 combinations perform worse, while 2290 perform better. This is not a poor result, but it indicates that users seeking top-tier performance would need a stronger CPU. The i5-9400's nearest rivals in the database include the Intel Core i7-1068NG7 with an average score of 2259, which is 0.2% slower, and the AMD Ryzen 5 PRO 1500 with a score of 2246, which is 0.4% faster. These small deltas show that the i5-9400 is in a tight cluster of similar-performing CPUs, so swapping to a competitor would yield minimal gains.
The GPU's nearest rivals include the AMD Radeon RX Vega M GL with an average score of 21153, which is 0.6% faster, and the AMD Radeon HD 8970M with a score of 21237, which is 1% faster. Interestingly, the RTX 5050's average benchmark score is 21035, which is lower than these rivals, despite being a newer architecture. This suggests that raw benchmark scores do not always align with gaming performance, but in this case, the GPU's 66th percentile ranking is still solid.
FAQ
Q: Can this PC run Pc Building Simulator at 1080p with maximum settings?
A: Yes, the Ultra preset at 1920x1080 averages 113 FPS, which is well above the 60 FPS playability threshold.
Q: What is the best settings preset for 1440p?
A: The Ultra preset at 2560x1440 averages 71 FPS, making it the most demanding setting that remains playable.
Q: Is 4K gaming possible with this combination?
A: Only at Low settings, which averages 78 FPS. Medium drops to 55 FPS, and High and Ultra fall to 39 and 37 FPS respectively.
Q: How does the CPU compare to its nearest rivals?
A: The Intel Core i5-9400 has an average benchmark score of 2254, which is nearly identical to the Intel Core i7-1068NG7 (2259, 0.2% slower) and the AMD Ryzen 5 PRO 1500 (2246, 0.4% faster).
Q: What is the GPU's percentile ranking?
A: The NVIDIA GeForce RTX 5050 sits in the 66th percentile among all GPUs, with a PassMark G3D score of 17326.
Q: Does the frame rate drop significantly between 1080p and 1440p?
A: Yes, for example, the High preset drops from 118 FPS at 1080p to 75 FPS at 1440p, a 36% decrease.
The Verdict
The data clearly answers whether this PC can run Pc Building Simulator. At 1920x1080, the answer is a definitive yes, with all presets exceeding 60 FPS. The Ultra preset averages 113 FPS, meaning users can enjoy the highest quality without concern. At 2560x1440, the answer is also yes, with all presets above 60 FPS, and Ultra averaging 71 FPS. The margin at 1440p Ultra is smaller, but still acceptable for smooth gameplay.
At 3840x2160, the answer is conditional. The only playable setting is Low, which averages 78 FPS. Medium averages 55 FPS, which is below the 60 FPS threshold, and High and Ultra are far too demanding at 39 and 37 FPS respectively. According to the verdict data, at 4K only Low is listed as playable. Therefore, this PC can run the game at 4K, but only with significant graphical compromises. For users with 4K monitors, the experience would be limited to the lowest quality preset, which may not be visually appealing. For 1080p and 1440p users, this combination is fully capable of delivering high frame rates across all settings.
Similar Performance Alternatives
Looking at the nearest rivals for the CPU, the Intel Core i7-1068NG7 performs nearly identically, with an average score of 2259 compared to the i5-9400's 2254, a difference of only 0.2%. The AMD Ryzen 5 PRO 1500 is 0.4% faster with a score of 2246, and the Intel Core i3-10305 is 0.4% slower at 2264. These CPUs would produce very similar frame rates in Pc Building Simulator, meaning that swapping the i5-9400 for any of these would not meaningfully change the gaming experience.
For the GPU, the AMD Radeon RX Vega M GL has an average score of 21153, which is 0.6% higher than the RTX 5050's 21035. The AMD Radeon HD 8970M is 1% faster at 21237, and the AMD Radeon RX 5600 XT is 1.6% slower at 20713. The NVIDIA RTX A4000 Mobile is 1.6% faster at 21379. These GPU alternatives would deliver very close performance, within a couple of percentage points, so users with these cards would see nearly identical frame rates in this game. In practice, the combination of any of these CPUs with any of these GPUs would produce a system that performs similarly to the measured i5-9400 and RTX 5050 pairing. The ranking of 2290 out of 3723 suggests that while this setup is not top-tier, it is far from the bottom, and the alternatives listed would place users in a similar performance band.