Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 42 | 44 | 62 | 88 |
| 1440p QHD | 80 | 84 | 119 | 168 |
| 1080p Full HD | 127 | 133 | 189 | 244 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
Similar Performance Alternatives
The Intel Core i5-9400 sits in a narrow performance band where several other processors deliver nearly identical average scores. The closest match in the database is the Intel Core i7-1068NG7, which scores 2259 against the i5-9400's 2254 average, a difference of only 0.2 percent. The Intel Core i3-10305 is marginally faster at 2264, placing it 0.4 percent ahead, while the Intel Core i7-10710U trails by 0.3 percent at 2248. The AMD Ryzen 5 PRO 1500 rounds out the group at 2246, just 0.4 percent behind. In practical terms, any of these four CPUs would produce nearly indistinguishable frame rates in Pc Building Simulator, since the performance gap between the slowest and fastest of this cluster is under one percent. For a simulation game that leans on CPU logic for component interactions, this means users upgrading from one of these parts to another should expect no measurable change in gameplay smoothness.
On the graphics side, the NVIDIA GeForce RTX 4060 posts an average benchmark score of 17639, placing it at the 61st percentile of all GPUs. The nearest rivals are a mixed group. The AMD Radeon HD 7790 scores 17666, just 0.2 percent higher, which is a surprisingly close match for a much older architecture. The AMD Radeon 780M integrated graphics score 17588, 0.3 percent behind, while the AMD Radeon Pro 560 and Pro 460 trail by 0.5 and 0.7 percent respectively. The data suggests that in this game, the RTX 4060's raw compute advantage over these rivals does not translate into a large frame rate gap, because Pc Building Simulator is not particularly demanding on GPU throughput at most settings. The RTX 4060's 8 GB of GDDR6 memory on a 128 bit bus with 272.0 GB/s bandwidth is more than sufficient for the game's modest texture workloads, so the limiting factor at higher resolutions becomes the CPU and memory subsystem rather than the graphics card itself.
For users considering alternative hardware, the key takeaway is that the i5-9400 and RTX 4060 combination behaves almost identically to setups using the rivals listed above. Swapping the CPU for an i7-1068NG7 or Ryzen 5 PRO 1500 would shift scores by less than half a percent, and swapping the GPU for an HD 7790 or Radeon 780M would similarly keep frame rates within a rounding error. The only meaningful differences would appear in other, more GPU-heavy titles, but within Pc Building Simulator's measured data, these components form a tightly grouped performance tier.
CPU and GPU Roles
Pc Building Simulator is a simulation title where the CPU carries substantial responsibility for game logic, shop management, and component compatibility calculations. The recorded data shows how the balance shifts across resolutions. At 1920x1080, the lowest resolution tested, the CPU is the primary constraint at low settings: the RTX 4060 pushes 244 FPS on Low, but this is likely near the upper bound of what the i5-9400 can feed. Moving from Low to Medium drops the average to 189 FPS, a 22.5 percent reduction, and High settles at 133 FPS. The jump from High to Ultra, 133 to 127 FPS, is only a 4.5 percent loss, suggesting that at 1080p the GPU still has headroom and the CPU is doing most of the work.
At 2560x1440, the GPU begins to assert more influence. Low runs at 168 FPS, Medium at 119, High at 84, and Ultra at 80. The scaling from 1080p Low to 1440p Low, 244 to 168 FPS, represents a 31.1 percent drop, which is consistent with a GPU-bound scenario where pixel throughput matters. The Medium preset at 1440p shows a minimum of 101 FPS and maximum of 137, a spread of 36 FPS, indicating that scene complexity varies widely depending on what the player is doing in the simulation. At Ultra, the 80 FPS average still clears the 60 FPS playable threshold by a healthy margin, so both components are cooperating without either becoming a severe bottleneck.
At 3840x2160, the GPU becomes the clear limiting factor. Low averages 88 FPS, Medium drops to 62 with a minimum of 53 and maximum of 72, High falls to 44, and Ultra bottoms out at 42. The difference between Medium and High at 4K is 18 FPS, a 29 percent reduction, which is a far steeper penalty than the 4.5 percent seen at 1080p. This pattern confirms that the RTX 4060's 8 GB frame buffer and 128 bit memory interface are adequate for 1080p and 1440p but strain at 4K when higher presets demand more memory bandwidth and fill rate. The CPU's role diminishes at 4K because the GPU is saturated, so the i5-9400's six cores and six threads are no longer the limiting factor.
The data implies that for players targeting 60 FPS, the CPU and GPU split responsibilities cleanly: at 1080p and 1440p, either component could be swapped for a slightly weaker part without dropping below 60 FPS on most presets, but at 4K, only Low and Medium presets remain viable, and even Medium dips to a 53 FPS minimum. The RTX 4060's 15.11 TFLOPS FP32 throughput and 118.1 GPixel/s pixel rate are the relevant specifications here, as they determine how quickly the card can fill 4K frames.
FAQ
Q: Can this PC run Pc Building Simulator at 4K resolution?
A: Yes, but only on Low and Medium settings. Low averages 88 FPS, while Medium averages 62 FPS with a minimum of 53 and maximum of 72. High and Ultra fall below the 60 FPS threshold at 44 and 42 FPS respectively.
Q: What is the best preset for 1440p gaming?
A: Ultra is fully playable at 2560x1440, averaging 80 FPS. All four presets, Low at 168, Medium at 119, High at 84, and Ultra at 80, clear the 60 FPS playable threshold.
Q: How does the CPU compare to its nearest rivals?
A: The Intel Core i5-9400 has an average benchmark score of 2254, placing it at the 47th percentile of all CPUs. The closest rival, the Intel Core i7-1068NG7, scores 2259, a 0.2 percent difference. The AMD Ryzen 5 PRO 1500 is 0.4 percent slower, and the Intel Core i3-10305 is 0.4 percent faster.
Q: Is the RTX 4060 a strong match for this game?
A: The RTX 4060 sits at the 61st percentile of all GPUs with an average score of 17639. Its nearest rival, the AMD Radeon HD 7790, scores within 0.2 percent, indicating that the card's performance in this specific game is not exceptional relative to much older hardware.
Q: What frame rates can I expect at 1080p with Ultra settings?
A: Ultra at 1920x1080 averages 127 FPS. High averages 133 FPS, Medium 189 FPS, and Low 244 FPS. All presets are far above the 60 FPS playable threshold.
Q: Why does the frame rate drop so much from 1440p to 4K?
A: At 2560x1440, Ultra averages 80 FPS, but at 3840x2160, Ultra drops to 42 FPS. This 47.5 percent reduction occurs because the GPU becomes the bottleneck at 4K, as the RTX 4060's memory bandwidth of 272.0 GB/s and 8 GB frame buffer are stressed by the higher pixel count.
How This Combo Ranks
The Intel Core i5-9400 paired with the NVIDIA GeForce RTX 4060 ranks 2059 out of 3723 tested combinations in Pc Building Simulator. This places the combo in the 55th percentile of all systems in the database, meaning roughly 45 percent of tested configurations perform worse and about 55 percent perform better. Given that the CPU sits at the 47th percentile and the GPU at the 61st percentile, the combined rank of 2059 is slightly lower than a simple average of the two would suggest. This is likely because the game's simulation-heavy nature rewards CPU performance more than raw GPU power, and the i5-9400's six-core, six-thread configuration from the Coffee Lake Refresh generation is now mid-pack compared to newer processors with higher thread counts.
The rank also reflects the fact that many combos in the database use higher-end CPUs paired with mid-range GPUs, which would outperform this setup in a game that depends on CPU logic. Conversely, combos with weaker CPUs and stronger GPUs would rank lower because the GPU's extra power is wasted when the CPU cannot feed frames fast enough. The 3723 total combos represent a wide spectrum of hardware, from entry-level office PCs to high-end enthusiast rigs, and the 2059 position indicates that this particular pairing is a balanced mid-range configuration. It is neither a standout performer nor a weak one; it delivers consistent 60 FPS gameplay at 1080p and 1440p across all presets, which is the practical definition of a capable system for this title.
Compared to the nearest rival CPUs and GPUs, the rank would shift by only a few positions if swapped, since the performance deltas are all under one percent. The data suggests that the combo's rank is more influenced by the CPU's position in the overall CPU distribution than by the GPU's, reinforcing the conclusion that Pc Building Simulator rewards processor performance disproportionately.
The Verdict
The data shows that this PC can run Pc Building Simulator at all three tested resolutions, but the playable settings vary significantly. At 1920x1080, the system clears the 60 FPS threshold on every preset: Low averages 244 FPS, Medium 189, High 133, and Ultra 127. This is a comfortable experience with substantial headroom. At 2560x1440, all four presets also remain above 60 FPS, with Ultra averaging 80 FPS. Players can max out the settings at 1440p without concern.
At 3840x2160, the situation changes. Low averages 88 FPS and Medium averages 62 FPS, which is just above the 60 FPS threshold, but the minimum recorded on Medium is 53 FPS, meaning some scenes will dip below the target. High and Ultra are not playable, averaging 44 and 42 FPS respectively. The verdict by resolution is therefore: 1080p and 1440p can run the game at maximum settings with 60 FPS or higher, while 4K is limited to Low and Medium presets, with Medium being the best playable option at an average of 62 FPS.
The RTX 4060's 8 GB of GDDR6 memory is sufficient for this game's needs at 1080p and 1440p, but the 128 bit memory bus and 272.0 GB/s bandwidth become limiting factors at 4K. The i5-9400, with its 2.90 GHz base clock and 4.10 GHz boost clock across six cores, provides adequate single-threaded performance for the game's logic, though its 47th percentile CPU ranking indicates it is not a high-end part by current standards. Overall, this is a solid mid-range system for Pc Building Simulator, with the caveat that 4K enthusiasts should stick to Medium settings or lower.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is Medium, which averages 62 FPS. Low also clears the threshold at 88 FPS, but Medium offers better visual quality while remaining playable. The minimum on Medium is 53 FPS, so there are occasional dips below 60, but the average is acceptable.
At 2560x1440, the best setting is Ultra, averaging 80 FPS. This is the highest preset available, and it maintains a comfortable margin above the 60 FPS threshold. Low, Medium, and High all also exceed 60 FPS, with averages of 168, 119, and 84 FPS respectively, but Ultra provides the full visual experience without sacrificing playability.
At 1920x1080, the best setting is also Ultra, averaging 127 FPS. This gives players maximum graphical fidelity with more than double the 60 FPS requirement. The frame rate is high enough that even demanding scenes with many components on screen should remain smooth. For players who prefer maximum smoothness over visuals, Low at 244 FPS is available, but Ultra is the recommended choice for the best balance of image quality and performance.
Measured FPS Breakdown
The recorded frame rates for this combination in Pc Building Simulator are as follows.
At 3840x2160, Low settings average 88 FPS. Medium averages 62 FPS with a minimum of 53 and maximum of 72. High averages 44 FPS. Ultra averages 42 FPS. No minimum or maximum values are recorded for Low, High, or Ultra, so only the Medium preset provides a measurable frame time range.
At 2560x1440, Low settings average 168 FPS. Medium averages 119 FPS with a minimum of 101 and maximum of 137. High averages 84 FPS. Ultra averages 80 FPS. The Medium preset again provides the only recorded variance, with a 36 FPS spread between minimum and maximum.
At 1920x1080, Low settings average 244 FPS. Medium averages 189 FPS with a minimum of 160 and maximum of 217. High averages 133 FPS. Ultra averages 127 FPS. The Medium preset shows a 57 FPS range, from 160 to 217, which is the widest variance recorded across all resolutions and settings.
The overall pattern shows that frame rates scale predictably with resolution and preset level. The 1080p Low result of 244 FPS is the highest recorded value, likely limited by the CPU's ability to issue draw calls rather than the GPU's rendering speed. The 4K Ultra result of 42 FPS is the lowest, where the GPU's pixel rate of 118.1 GPixel/s and texture rate of 236.2 GTexel/s are stretched thin. The 1440p results occupy a middle ground where both components share the load more evenly, as evidenced by the moderate drops from 1080p to 1440p compared to the steep drops from 1440p to 4K.