Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

80%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
268 FPS
Ultra 1080p Measured
129 FPS

1440p (2K / QHD)

Low 1440p Measured
170 FPS
Ultra 1440p Measured
82 FPS

4K (Ultra HD)

Low 4K Measured
90 FPS
Ultra 4K Measured
45 FPS
7.4ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 49,394
Graphics Card
Required 27,436
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 45 63 90
1440p QHD 82 83 120 170
1080p Full HD 129 136 189 268

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 136
1920x1080 Low 268
1920x1080 Medium 189
1920x1080 Ultra 129
2560x1440 High 83
2560x1440 Low 170
2560x1440 Medium 120
2560x1440 Ultra 82
3840x2160 High 45
3840x2160 Low 90
3840x2160 Medium 63
3840x2160 Ultra 45

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i5-14600KF and NVIDIA GeForce RTX 4060 configuration delivers a thoroughly playable experience in Pc Building Simulator, though the ceiling of its capabilities varies sharply with resolution. Benchmark data indicates that this combo ranks 1949 out of 3723 tested combinations, placing it in the middle of the pack. At 1080p and 1440p, the system is effectively unconstrained, clearing the 60 FPS threshold at every preset level. At 4K, however, the data reveals a clear boundary: the Ultra preset falls just below the playable threshold, while High settings are also insufficient. The system's strongest showing is at 1440p, where it maintains high frame rates even at maximum quality.

Measured FPS Breakdown

The measured FPS data for this combination covers twelve distinct scenarios, spanning three resolutions and four quality presets. At 1920x1080, the system demonstrates exceptional headroom across the board. The Low preset delivers an average of 268.3 FPS, which is the highest raw figure recorded for this configuration. Moving up the quality ladder, Medium produces 188.9 FPS, High yields 135.7 FPS, and even the most demanding Ultra preset maintains a robust 128.6 FPS average. The scaling between presets at 1080p is notably consistent, with each step down in quality yielding substantial gains; the jump from Ultra to High provides a modest 7.1 FPS improvement, while the leap from High to Medium adds 53.2 FPS, and Medium to Low adds another 79.4 FPS.

At 2560x1440, the frame rates remain high but begin to show the influence of increased pixel count. The Low preset still achieves an impressive 169.5 FPS average, which is a drop of 98.8 FPS from the 1080p Low result. Medium settings produce 119.5 FPS, representing a 69.4 FPS reduction from the equivalent 1080p figure. High settings hit 83 FPS, down 52.7 FPS from 1080p High. The Ultra preset at 1440p records an average of 81.9 FPS, which is 46.7 FPS lower than the 1080p Ultra score. Notably, the gap between High and Ultra at 1440p is minimal, with only a 1.1 FPS difference, suggesting that the Ultra preset's additional effects are largely offset by the resolution cost.

The 3840x2160 results tell a different story. At this resolution, the system's performance falls off significantly. The Low preset averages 89.6 FPS, which is still comfortably above the 60 FPS playable threshold, but it represents a 178.7 FPS drop from 1080p Low. Medium settings yield 63.3 FPS, barely clearing the playable line. High settings drop to 44.7 FPS, and Ultra is nearly identical at 44.9 FPS. The data shows a compressed range at 4K; the difference between High and Ultra is just 0.2 FPS, and even the gap between Low and Medium is only 26.3 FPS. This suggests that at 4K, the GPU is the dominant constraint, and preset changes have diminishing returns once the resolution overhead is accounted for.

Best Settings per Resolution

The verdict data provides clear guidance on the optimal settings for each resolution. At 1920x1080, all four presets are playable, meaning the game runs at or above 60 FPS regardless of quality level. The best settings are Ultra, which achieves an average of 128.6 FPS. This is the clear recommendation for 1080p users, as the system has more than double the required frame rate headroom at maximum quality.

At 2560x1440, all four presets also clear the 60 FPS threshold. The best settings are again Ultra, with an average of 81.9 FPS. This is a strong result; the system delivers high-refresh-rate territory even at the highest quality setting, leaving 21.9 FPS of headroom above the playable threshold. The data shows that 1440p Ultra is a sustainable option for this hardware.

At 3840x2160, the picture changes. Only Low and Medium settings are playable according to the verdict data. The best settings are Medium, which achieves an average of 63.3 FPS. This is a marginal clearance, with only 3.3 FPS of headroom above the 60 FPS line. High and Ultra both fall below the threshold, with averages of 44.7 and 44.9 FPS respectively. For 4K users, the recommendation is strictly Medium, as it is the highest quality preset that maintains a playable frame rate.

CPU and GPU Roles

The data reveals a clear division of labor between the CPU and GPU in Pc Building Simulator. The Core i5-14600KF is a high-end processor, scoring in the 90th percentile versus all CPUs, with an average benchmark score of 49394. Its nearest rivals include the AMD Ryzen 9 7900, which scores 49228 (a 0.3% delta), and the AMD Ryzen AI Max+ 388, which scores 49796 (a -0.8% delta). This places the CPU well above the median for all tested processors, suggesting it has ample headroom for simulation logic and physics.

The RTX 4060, by contrast, sits in the 61st percentile versus all GPUs, with an average benchmark score of 17639. Its nearest rivals include the AMD Radeon HD 7790, which scores 17666 (a -0.2% delta), and the AMD Radeon 780M, which scores 17588 (a 0.3% delta). This positions the GPU as a mid-range component, and the measured FPS data confirms that it is the limiting factor at higher resolutions.

The scaling between resolutions provides direct evidence of GPU dominance. At 1080p, the Ultra preset averages 128.6 FPS. At 1440p, the same preset drops to 81.9 FPS, a reduction of 46.7 FPS. At 4K, it falls further to 44.9 FPS, another 37 FPS drop. This steep decline with increasing resolution is characteristic of a GPU-bound scenario. The CPU's performance is largely constant across these resolutions, so the frame rate variance is attributable to the GPU's pixel throughput.

The preset scaling also supports this conclusion. At 1080p, the difference between Low and Ultra is 139.7 FPS, indicating that the GPU has significant headroom to render additional effects. At 1440p, this gap narrows to 87.6 FPS, and at 4K, it collapses to just 44.7 FPS. As resolution increases, the GPU's fixed resources are consumed by pixel output, leaving less capacity for quality enhancements. The CPU, with its 14 cores and 20 threads, is not the bottleneck in any of these scenarios; the data shows that even at 1080p Low, where the frame rate peaks at 268.3 FPS, the system does not exhibit CPU-related stalling.

FAQ

Q: Can this PC run Pc Building Simulator at 4K with Ultra settings?

A: No. At 3840x2160 with Ultra settings, the system averages 44.9 FPS, which is below the 60 FPS playable threshold. The verdict data lists only Low and Medium as playable settings at this resolution.

Q: What is the best quality setting at 1440p?

A: The best setting is Ultra, which achieves an average of 81.9 FPS. All four presets (Low, Medium, High, Ultra) are playable at 2560x1440, but Ultra offers the highest quality while remaining 21.9 FPS above the playable line.

Q: How much faster is the system at 1080p compared to 4K?

A: At 1080p Ultra, the average frame rate is 128.6 FPS. At 4K Ultra, it drops to 44.9 FPS. This represents a reduction of 83.7 FPS, or roughly a 65% decrease in performance when moving from 1080p to 4K at the same settings.

Q: Is the RTX 4060 a strong performer relative to other GPUs?

A: The RTX 4060 sits in the 61st percentile versus all GPUs, with an average benchmark score of 17639. Its closest rivals are the AMD Radeon HD 7790, which scores 17666 (0.2% higher), and the AMD Radeon 780M, which scores 17588 (0.3% lower). This places it in the mid-range tier.

Q: Which component is more important for this game at 1440p?

A: The GPU is the primary constraint. Evidence comes from the preset scaling: at 1440p, Low averages 169.5 FPS, while Ultra averages 81.9 FPS. The CPU's high percentile ranking (90th) and the steep frame rate drops with resolution indicate that the RTX 4060 governs performance.

Q: Does the game run above 60 FPS at 1080p with everything maxed?

A: Yes. At 1920x1080 with Ultra settings, the average frame rate is 128.6 FPS, which is more than double the 60 FPS playable threshold. The verdict data confirms that all presets at 1080p are playable.

Similar Performance Alternatives

For the CPU, the nearest rivals provide close performance matches. The AMD Ryzen 9 7900 scores 49228, which is 0.3% lower than the i5-14600KF's 49394 average. This is effectively a tie in synthetic benchmarks, so users could expect nearly identical CPU-bound behavior in Pc Building Simulator. The AMD Ryzen 7 PRO 5755G scores 49196, a 0.4% delta, and the Intel Core Ultra 5 245 scores 48995, a 0.8% delta. On the other side, the AMD Ryzen AI Max+ 388 scores 49796, which is 0.8% higher. All of these processors would deliver comparable simulation and logic performance, making them suitable substitutes if the i5-14600KF is unavailable.

For the GPU, the alternatives are closer in raw score but represent different hardware classes. The AMD Radeon HD 7790 scores 17666, which is 0.2% higher than the RTX 4060's 17639. The AMD Radeon 780M scores 17588, a 0.3% delta, and the AMD Radeon Pro 560 scores 17551, a 0.5% delta. The AMD Radeon Pro 460 scores 17509, a 0.7% delta. In practice, these would yield nearly identical average frame rates in Pc Building Simulator, though the specific rendering features may differ. The data suggests that any of these GPUs would produce similar FPS figures at each resolution and preset combination, making them direct performance equivalents for this game.

The Verdict

The data indicates that this system is fully capable of running Pc Building Simulator at high quality, with specific caveats at 4K. At 1920x1080, the system clears the 60 FPS threshold at all presets, with the Ultra setting delivering 128.6 FPS. This makes 1080p gaming entirely unrestricted; users can enable maximum quality without concern. At 2560x1440, the system also clears 60 FPS at all presets, with Ultra achieving 81.9 FPS. This is the sweet spot for the hardware, offering a strong balance of visual fidelity and frame rate headroom.

At 3840x2160, the system is only partially playable. The verdict data specifies that Low and Medium are the only playable settings at this resolution. The best playable setting is Medium, which averages 63.3 FPS. This is a marginal result, with only 3.3 FPS of headroom above the threshold. High and Ultra both fall below 60 FPS, averaging 44.7 and 44.9 FPS respectively. For 4K users, the recommendation is to stick with Medium settings to maintain a playable frame rate. The overall verdict is positive: the system can run the game, but 4K users must accept a quality reduction. At 1080p and 1440p, the system is a high-performance machine for this title, ranking 1949 out of 3723 tested combinations.