Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

93%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
373 FPS
Ultra 1080p Measured
188 FPS

1440p (2K / QHD)

Low 1440p Measured
251 FPS
Ultra 1440p Measured
121 FPS

4K (Ultra HD)

Low 4K Measured
133 FPS
Ultra 4K Measured
60 FPS
5ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 32,279
Graphics Card
Required 27,436
Your GPU 40,377

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 60 64 94 133
1440p QHD 121 128 180 251
1080p Full HD 188 201 279 373

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 201
1920x1080 Low 373
1920x1080 Medium 279
1920x1080 Ultra 188
2560x1440 High 128
2560x1440 Low 251
2560x1440 Medium 180
2560x1440 Ultra 121
3840x2160 High 64
3840x2160 Low 133
3840x2160 Medium 94
3840x2160 Ultra 60

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 5070 delivers a remarkably consistent experience in Pc Building Simulator, with measured performance scaling cleanly across all three primary resolutions. The data shows this combination is more than capable of handling the game’s simulation workload, though the margin of safety varies significantly depending on how demanding the settings and resolution are.

Measured FPS Breakdown

At 1920x1080, the combination produces frame rates that are almost absurdly high. The Low preset achieves an average of 372.9 FPS, which is the highest recorded figure in the entire dataset. Moving to Medium yields 279.2 FPS, while High drops to 200.7 FPS. The Ultra preset still manages 188.2 FPS, which is over three times the 60 FPS playable threshold. These numbers suggest that at 1080p, the system is rarely bound by either the CPU or GPU in any meaningful way.

Stepping up to 2560x1440, the performance remains robust but begins to show more variation between presets. The Low setting records 251 FPS, Medium produces 180.1 FPS, and High comes in at 127.6 FPS. Ultra, the most demanding preset, still delivers 121.4 FPS. The gap between Low and Ultra is roughly 130 FPS, which indicates that the GPU is starting to feel the workload increase, but the overall headroom above 60 FPS remains substantial.

At 3840x2160, the picture changes noticeably. The Low preset delivers 132.7 FPS, and Medium drops to 93.9 FPS. High falls to 64.3 FPS, which is just barely above the 60 FPS threshold. Ultra is the only preset that dips below the playable line, with an average of 59.9 FPS. This is the first resolution where the system’s limits become visible, and the gap between Low and Ultra is now over 70 FPS, confirming that resolution scaling is the dominant factor.

The measured data does not include min or max FPS values, so the analysis relies solely on average frame rates. However, the consistency across presets at lower resolutions suggests that frame pacing is unlikely to be a problem in most scenarios.

Best Settings per Resolution

At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 64.3 FPS. This is a narrow margin of only 4.3 FPS above the playable threshold, which means that while High is technically playable, it leaves little room for frame drops. Ultra at this resolution falls short at 59.9 FPS, making it the only preset across all resolutions that fails to clear the 60 FPS bar.

At 2560x1440, the best settings are Ultra, which averages 121.4 FPS. This is nearly double the playable threshold, and it means that users can run the game at maximum visual quality without worrying about performance. The gap between Ultra and the next preset down, High at 127.6 FPS, is modest, but the Ultra preset is clearly the recommended choice for this resolution.

At 1920x1080, the best settings are also Ultra, with an average of 188.2 FPS. This is over three times the playable threshold, and it indicates that the system has substantial headroom even at the highest preset. For users with high refresh rate monitors, the 1080p Ultra setting provides enough FPS to take advantage of displays that support 144 Hz or higher.

CPU and GPU Roles

The scaling between resolutions and presets reveals a clear division of labor between the Intel Core i5-14400F and the NVIDIA GeForce RTX 5070. At 1920x1080, the frame rates are so high that the workload is likely split evenly between the CPU and GPU, with neither component becoming a bottleneck. The jump from Low at 372.9 FPS to Ultra at 188.2 FPS represents a 50% reduction, which is consistent with a GPU-bound scenario at higher settings, but the absolute numbers are high enough that the CPU is still keeping up.

At 2560x1440, the same pattern holds, but the scaling is more pronounced. Low records 251 FPS, while Ultra drops to 121.4 FPS. This 52% reduction suggests that the GPU is becoming the primary limiter, as the increased pixel count places more strain on the RTX 5070’s rendering capabilities. The CPU, with its 10 cores and 16 threads, appears to have ample headroom for the simulation logic, which is typically not as demanding as the graphics pipeline.

At 3840x2160, the GPU’s role becomes dominant. Low produces 132.7 FPS, but Ultra falls to 59.9 FPS, a 55% reduction. This is the clearest evidence that the RTX 5070 is the limiting factor at 4K, as the CPU’s performance does not change with resolution. The i5-14400F’s single-core and multi-core scores, including a Cinebench R23 multi-core score of 21645 and a single-core score of 3055, are more than sufficient for the game’s simulation tasks, but they cannot compensate for the GPU’s workload at higher pixel counts.

The lack of min and max FPS data prevents a deeper analysis of frame time consistency, but the average FPS trends indicate that the GPU is the primary constraint at 4K, while the CPU and GPU are more balanced at lower resolutions.

Similar Performance Alternatives

The CPU’s nearest rivals, based on average benchmark scores, provide a useful comparison for understanding its performance envelope. The AMD Ryzen 7 PRO 8840U has an average score of 32233, which is just 0.1% lower than the i5-14400F’s 32279. The Intel Core i9-11900 is also close, with a score of 32226 and a delta of 0.2%. On the other side, the AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher, and the Intel Core i7-12800H scores 32121, which is 0.5% lower. These rivals are all within a narrow band of performance, meaning that swapping the i5-14400F for any of these chips would result in nearly identical frame rates in Pc Building Simulator.

The GPU’s nearest rivals include the AMD Radeon Pro 580, which scores 40318, a 0.1% difference from the RTX 5070’s 40377. The AMD Radeon Pro WX 7100 is 0.8% lower at 40063, while the AMD Radeon Pro 5300 is 1.2% higher at 40870. The NVIDIA RTX A500 Mobile is 2% lower at 39568. These alternatives are all professional or mobile-oriented GPUs, but their benchmark scores indicate that they would deliver similar performance in this game, though the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth give it an edge in texture-heavy scenes.

FAQ

Q: Can this PC run Pc Building Simulator at 4K Ultra settings?

A: No. At 3840x2160 with Ultra settings, the average FPS is 59.9, which is just below the 60 FPS playable threshold. The best playable setting at 4K is High, which averages 64.3 FPS.

Q: What is the highest preset that stays above 60 FPS at 2560x1440?

A: Ultra is the best playable preset at 1440p, with an average of 121.4 FPS. This is nearly double the playable threshold, leaving substantial headroom for frame drops.

Q: How does the RTX 5070 compare to the AMD Radeon Pro 580 in this game?

A: The RTX 5070 has an average benchmark score of 40377, while the AMD Radeon Pro 580 scores 40318, a difference of 0.1%. In practice, both GPUs would deliver nearly identical frame rates in Pc Building Simulator.

Q: Is the Intel Core i5-14400F a bottleneck at 1080p?

A: No. At 1920x1080 with Low settings, the system achieves 372.9 FPS, and even at Ultra it maintains 188.2 FPS. The CPU’s Cinebench R23 multi-core score of 21645 and single-core score of 3055 are more than sufficient for the game’s simulation workload.

Q: What is the only preset across all resolutions that fails to hit 60 FPS?

A: The 3840x2160 Ultra preset, which averages 59.9 FPS. All other presets at all resolutions clear the 60 FPS threshold.

Q: How does the i5-14400F rank against the Intel Core i9-11900?

A: The i5-14400F has an average benchmark score of 32279, while the i9-11900 scores 32226, a difference of 0.2%. The i5 is slightly faster in synthetic benchmarks, but the difference is negligible in gaming workloads.

How This Combo Ranks

The Intel Core i5-14400F and NVIDIA GeForce RTX 5070 combination ranks 669th out of 3723 tested combos in Pc Building Simulator. This places it in the top 18% of all configurations, which is a strong showing given the game’s relatively light system requirements. The ranking reflects the fact that this combo is well above the average configuration, but it is not at the very top of the list, likely because the game’s simulation focus means that extremely high-end GPUs do not provide a significant advantage over the RTX 5070.

The rank is more impressive when considering that the CPU and GPU both sit in the 82nd and 83rd percentiles, respectively, among all processors and graphics cards. The combo’s performance in this specific game is slightly lower than its synthetic benchmark scores would suggest, which is a common pattern for simulation titles that depend more on CPU logic than raw GPU throughput.

The Verdict

This PC can run Pc Building Simulator at all three tested resolutions, with only one exception. At 1920x1080, the Ultra preset delivers 188.2 FPS, which is more than enough for any monitor. At 2560x1440, Ultra averages 121.4 FPS, providing a smooth experience with maximum visual quality. At 3840x2160, the system can handle High settings at 64.3 FPS, but Ultra falls just short at 59.9 FPS.

For users with 4K displays, the recommendation is to use High settings, which provides a stable experience above the playable threshold. For 1440p and 1080p, the Ultra preset is the clear choice, offering the best visual quality while maintaining frame rates that are well above 60 FPS. The data indicates that this combo is well-suited for Pc Building Simulator, with the only compromise being the 4K Ultra preset, which misses the 60 FPS mark by a single frame per second.