Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

79%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
237 FPS
Ultra 1080p Measured
113 FPS

1440p (2K / QHD)

Low 1440p Measured
149 FPS
Ultra 1440p Measured
71 FPS

4K (Ultra HD)

Low 4K Measured
78 FPS
Ultra 4K Measured
37 FPS
8.5ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 32,279
Graphics Card
Required 27,436
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 37 39 55 78
1440p QHD 71 75 106 149
1080p Full HD 113 118 168 237

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 118
1920x1080 Low 237
1920x1080 Medium 168
1920x1080 Ultra 113
2560x1440 High 75
2560x1440 Low 149
2560x1440 Medium 106
2560x1440 Ultra 71
3840x2160 High 39
3840x2160 Low 78
3840x2160 Medium 55
3840x2160 Ultra 37

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i5-14400F and NVIDIA GeForce RTX 5050 combination delivers a performance profile that is heavily dependent on resolution for Pc Building Simulator. At 1080p and 1440p, this pairing provides a wide margin of playability across all tested presets, while 4K presents a significant challenge that limits users to Low settings for a consistent 60 FPS experience. The data indicates a clear scaling pattern where the GPU becomes the primary bottleneck as resolution increases, but the CPU's strong multi-core performance ensures high frame rates at lower resolutions.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains an average frame rate at or above 60 FPS is Ultra, which achieves an average of 113 FPS. This is the highest quality setting available in the test data, and it clears the playability threshold by a substantial margin. The frame rate headroom here is considerable, as even the most graphics-intensive settings do not stress the RTX 5050 enough to drop below the target.

For 2560x1440, the best settings are also Ultra, with an average of 71 FPS. This result is notable because it shows that the combination can handle maximum quality at a higher resolution, though the margin above the 60 FPS threshold is narrower than at 1080p. The drop from 113 FPS to 71 FPS when moving from 1080p to 1440p represents a 37% reduction in performance, indicating that the GPU is beginning to feel the load.

At 3840x2160, the situation changes dramatically. The most demanding preset that stays at or above 60 FPS is Low, which produces an average of 78 FPS. Every other preset—Medium at 55 FPS, High at 39 FPS, and Ultra at 37 FPS—falls below the playable threshold. The gap between Low and Medium is substantial, with a 23 FPS difference, suggesting that the RTX 5050's 8 GB memory capacity is a limiting factor at 4K resolutions.

FAQ

Q: Can this PC run Pc Building Simulator at 1080p with maximum settings?

A: Yes. Benchmark results show Ultra settings at 1920x1080 produce an average of 113 FPS, which is well above the 60 FPS playable threshold. This is the highest preset tested and it performs excellently.

Q: What is the best preset for 1440p gaming?

A: The data shows Ultra settings at 2560x1440 deliver an average of 71 FPS, making it the best playable option. All four tested presets—Low at 149 FPS, Medium at 106 FPS, High at 75 FPS, and Ultra at 71 FPS—clear the 60 FPS threshold.

Q: Is 4K gaming viable with this hardware?

A: Only at the lowest quality settings. At 3840x2160, Low settings achieve 78 FPS, but Medium drops to 55 FPS, High to 39 FPS, and Ultra to 37 FPS. The 60 FPS threshold is only met with Low settings.

Q: How does the RTX 5050's benchmark score compare to its nearest rivals?

A: The GPU has an average benchmark score of 21035 and sits at the 66th percentile among all GPUs. Its closest rival, the AMD Radeon RX Vega M GL, scores 21153, which is 0.6% higher. The AMD Radeon RX 5600 XT is 1.6% lower with a score of 20713.

Q: What is the CPU's performance percentile and how does it affect gaming?

A: The Intel Core i5-14400F ranks in the 83rd percentile of all CPUs, with an average benchmark score of 32279. Its nearest rival, the AMD Ryzen 7 PRO 8840U, is only 0.1% different in score, indicating that the CPU is not a limiting factor in most scenarios.

Q: What frame rates can be expected at 1080p Medium settings?

A: The measured data shows an average of 168 FPS at 1920x1080 with Medium settings, with a minimum of 142 FPS and a maximum of 193 FPS. This provides a very smooth experience with no risk of dropping below 60 FPS.

Similar Performance Alternatives

Looking at the nearestRivals data for both components, several alternative builds would deliver similar frame rates in Pc Building Simulator. On the CPU side, the Intel Core i5-14400F's average benchmark score of 32279 is closely matched by the AMD Ryzen 7 PRO 8840U at 32233 (a 0.1% difference) and the Intel Core i9-11900 at 32226 (0.2% difference). The AMD Ryzen 7 6800HS scores 32354, which is 0.2% higher, while the Intel Core i7-12800H comes in at 32121, 0.5% lower. Any of these processors would provide nearly identical CPU-bound performance in this simulation game.

For the GPU, the RTX 5050's average score of 21035 places it in close company with several older or mobile parts. The AMD Radeon RX Vega M GL scores 21153, just 0.6% higher, while the AMD Radeon HD 8970M is 1% higher at 21237. The AMD Radeon RX 5600 XT is the closest competitor on the lower side, scoring 20713, which is 1.6% less. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% above the RTX 5050. Systems built with these GPUs would exhibit similar performance scaling across resolutions, though the RTX 5050's newer architecture may offer better feature support.

When pairing these alternatives, a system with an Intel Core i9-11900 and an AMD Radeon RX 5600 XT would behave almost identically to the tested configuration. The i9-11900's CPU score is only 0.2% different, and the RX 5600 XT's GPU score is 1.6% lower, which would translate to a few frames per second difference at most. Similarly, a laptop with a Ryzen 7 6800HS and an RTX A4000 Mobile would track closely, though the mobile components might exhibit different thermal behavior.

The Verdict

The data clearly answers whether this PC can run Pc Building Simulator: yes, but with significant caveats at 4K. At 1920x1080, all four tested presets—Low (237 FPS), Medium (168 FPS), High (118 FPS), and Ultra (113 FPS)—clear the 60 FPS threshold with enormous headroom. The verdict list designates Ultra as the best settings at this resolution, with an average of 113 FPS.

At 2560x1440, the situation remains positive. Every preset is playable, from Low at 149 FPS to Ultra at 71 FPS. The best settings are Ultra at 71 FPS, which stays above the threshold but with less margin than at 1080p. Users who prefer higher refresh rates might opt for High at 75 FPS or Medium at 106 FPS, but the data shows Ultra is viable.

At 3840x2160, the verdict is more restrictive. Only Low settings are playable, achieving 78 FPS. Medium (55 FPS), High (39 FPS), and Ultra (37 FPS) all fail to reach the 60 FPS target. For 4K gaming, users would need to accept significant visual compromises or consider a more powerful GPU. The recommendation is clear: this system excels at 1080p and 1440p, but 4K requires the lowest quality preset.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across all resolution and settings combinations. At 1920x1080, the frame rates are exceptionally high across the board. Low settings produce an average of 237 FPS, Medium delivers 168 FPS with a range of 142 to 193 FPS, High reaches 118 FPS, and Ultra manages 113 FPS. The consistency between High and Ultra is notable, with only a 5 FPS difference, suggesting that the Ultra preset's additional effects are not particularly demanding at this resolution.

Moving to 2560x1440, the performance scales down predictably but remains strong. Low settings average 149 FPS, Medium hits 106 FPS with a range of 90 to 122 FPS, High achieves 75 FPS, and Ultra produces 71 FPS. The gap between Medium and High is larger here—31 FPS—indicating that the GPU's fill rate becomes more relevant as pixel count increases.

At 3840x2160, the impact of resolution is severe. Low settings drop to 78 FPS, Medium falls to 55 FPS with a range of 47 to 64 FPS, High averages 39 FPS, and Ultra bottoms out at 37 FPS. The difference between Low and Medium is 23 FPS, which is the largest single-step drop across all tested configurations. This suggests that the RTX 5050's 8 GB memory buffer is insufficient for 4K textures at Medium and above, causing a sharp performance cliff.

How This Combo Ranks

In the database of tested combinations, this specific pairing of Intel Core i5-14400F and NVIDIA GeForce RTX 5050 ranks 2290th out of 3723 total combos for Pc Building Simulator. This places it in the 61.5th percentile of all tested systems, meaning roughly 38.5% of configurations perform better in this game. Given that the game is a simulation title with relatively modest graphics requirements, this ranking reflects the GPU's mid-range positioning more than the CPU's capability.

The rank is likely held back by the 4K results, where the RTX 5050 struggles to maintain playable frame rates above Low settings. At 1080p and 1440p, the system performs admirably, but the database ranking aggregates across all tested resolutions. The 83rd percentile CPU ranking versus the 66th percentile GPU ranking indicates that the graphics card is the weaker link in this pairing, which is consistent with the observed performance scaling.

CPU and GPU Roles

The benchmark data reveals distinct roles for the CPU and GPU across different resolutions. At 1920x1080, the CPU is the dominant factor. The high frame rates—237 FPS at Low and 113 FPS at Ultra—suggest that the i5-14400F's 10 cores and 16 threads are more than sufficient to feed the GPU. The small difference between High (118 FPS) and Ultra (113 FPS) indicates that the GPU is not heavily taxed at this resolution, and the CPU's strong single-thread score of 3055 in Cinebench R23 ensures it can handle the simulation's logic without bottlenecks.

At 2560x1440, the balance shifts toward the GPU. The drop from 149 FPS at Low to 71 FPS at Ultra shows that the graphics card's rendering capabilities are becoming more important. The CPU still provides enough headroom, as evidenced by the fact that even the lowest frame rate at this resolution (71 FPS) is above the playable threshold. The GPU's 320 GB/s memory bandwidth and 13.17 TFLOPS of FP32 performance are sufficient to handle the increased pixel count.

At 3840x2160, the GPU is unequivocally the limiting factor. The sharp decline from 78 FPS at Low to 55 FPS at Medium demonstrates that the RTX 5050's 8 GB memory capacity and 128-bit memory bus cannot cope with 4K textures. The CPU's role diminishes at this resolution, as the frame rates are entirely constrained by the GPU's fill rate and memory subsystem. The fact that Ultra (37 FPS) and High (39 FPS) produce nearly identical results suggests that the GPU is completely saturated, with no additional CPU overhead affecting the outcome. Users targeting 4K would need to upgrade the GPU, as the i5-14400F clearly has more performance to offer than the RTX 5050 can utilize at this resolution.