Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 37 | 39 | 55 | 78 |
| 1440p QHD | 71 | 75 | 106 | 149 |
| 1080p Full HD | 113 | 118 | 168 | 237 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
The Intel Core i5-13400F and NVIDIA GeForce RTX 5050 combination delivers a playable experience in Pc Building Simulator across most common resolutions, but 4K Ultra demands compromise. This pairing is strong enough for high-refresh 1080p and smooth 1440p, with 4K limited to Low settings for a stable 60+ FPS. The data below breaks down exactly where this combo stands.
Similar Performance Alternatives
The CPU in this combo, the Intel Core i5-13400F, sits in the 77th percentile of all CPUs with an average benchmark score of 25292. Its nearest rivals are remarkably close in aggregate performance. The AMD Ryzen 9 6900HS scores 25284, a delta of 0%. The Intel Core 5 120 scores 25362, trailing by only 0.3%. The AMD Ryzen 5 5600X3D also scores 25365, another 0.3% gap. The AMD Ryzen 7 6800H scores 25201, which is 0.4% ahead of the i5-13400F. In practical terms, any of these CPUs would produce nearly identical frame rates in a simulation title like Pc Building Simulator, where the workload rarely saturates more than a few threads.
On the GPU side, the NVIDIA GeForce RTX 5050 achieves an average benchmark score of 21035, placing it in the 66th percentile of all GPUs. Its nearest rivals are an eclectic mix. The AMD Radeon RX Vega M GL scores 21153, which is 0.6% higher. The AMD Radeon HD 8970M scores 21237, 1% higher. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. The presence of older mobile parts like the HD 8970M in this list is notable, but the performance deltas are so small that swapping between any of these GPUs would yield imperceptible differences in this game. For Pc Building Simulator, which is not graphically demanding, the RTX 5050's raw compute is more than sufficient, and any of these rivals would behave similarly.
What this means for a builder is that the i5-13400F is a solid mid-range anchor. The 10-core, 16-thread configuration with a 4.60 GHz boost clock provides ample headroom for simulation logic. The nearest rival CPUs are all within a fraction of a percent in aggregate benchmarks, so choosing between them should be based on platform features rather than gaming performance. Similarly, the RTX 5050, with 2560 shading units and 8 GB of GDDR6 memory on a 128-bit bus, delivers 320.0 GB/s of bandwidth. Its rivals are all within 1.6% in average score, meaning the GPU choice is not a bottleneck differentiator for this title.
CPU and GPU Roles
The measured frame rates show a clear pattern: this game scales heavily with resolution and settings, but the CPU is rarely the limiting factor. At 1920x1080, the lowest resolution tested, the combo achieves 237 FPS on Low settings, 168 FPS on Medium, 118 FPS on High, and 113 FPS on Ultra. The jump from Low to Ultra is a 124 FPS drop, which indicates the GPU is doing progressively more work. However, even at Ultra, the frame rate remains above 110 FPS, suggesting the CPU is feeding the GPU adequately.
At 2560x1440, the pattern continues. Low settings produce 149 FPS, Medium drops to 106 FPS, High to 75 FPS, and Ultra to 71 FPS. The scaling from Low to Ultra is a 78 FPS reduction. The CPU's role here is still secondary; the GPU is handling the increased pixel count and texture detail. The fact that Ultra at 1440p still clears 60 FPS with room to spare indicates that neither component is being pushed to its limit.
The picture changes at 3840x2160. Low settings yield 78 FPS, Medium drops to 55 FPS, High to 39 FPS, and Ultra to 37 FPS. The Medium preset shows a minimum of 47 FPS and a maximum of 64 FPS, which means it straddles the playable threshold. At 4K, the GPU becomes the dominant factor. The CPU's 16 threads and high boost clock are sufficient; the RTX 5050's 13.17 TFLOPS FP32 performance and 32 ROPs are what determine the outcome. The rendering resolution quadruples from 1080p to 4K, and the GPU's fill rate of 82.30 GPixel/s is simply overwhelmed at High and Ultra settings.
Resolution scaling data reinforces this. From 1080p Ultra at 113 FPS to 1440p Ultra at 71 FPS, the drop is 42 FPS. From 1440p Ultra to 4K Ultra, the drop is 34 FPS. The GPU is clearly the primary driver of performance at higher resolutions. Conversely, the CPU's role is most evident at 1080p Low, where the 237 FPS result indicates the processor can push frames far beyond what the GPU can render at higher settings. For Pc Building Simulator, users should treat the i5-13400F as a capable foundation and the RTX 5050 as the component that dictates settings at each resolution.
FAQ
Q: Can this combo run Pc Building Simulator at 4K with High settings?
A: No. The measured average frame rate at 3840x2160 High is 39 FPS, which is well below the 60 FPS playable threshold. Medium settings average 55 FPS, also below the threshold, while Low settings average 78 FPS and are playable.
Q: What is the best playable setting at 2560x1440?
A: Ultra settings are fully playable at 1440p, with an average of 71 FPS. All four presets—Low, Medium, High, and Ultra—clear the 60 FPS threshold at this resolution, so users can max out the game without issue.
Q: How does the RTX 5050 compare to its nearest GPU rival in aggregate benchmarks?
A: The RTX 5050 scores 21035 on average. The AMD Radeon RX 5600 XT scores 20713, which is 1.6% lower. The AMD Radeon RX Vega M GL scores 21153, 0.6% higher. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% higher. The deltas are minimal.
Q: Is the CPU or GPU more important for reaching 60 FPS in this game?
A: At 1080p and 1440p, the GPU is the limiting factor at higher presets, but both components have headroom. At 4K, the GPU is decisively the bottleneck, as the CPU's 16 threads and 4.60 GHz boost clock are sufficient for all tested settings.
Q: What frame rates can users expect at 1920x1080 on Medium settings?
A: The measured average is 168 FPS, with a minimum of 142 FPS and a maximum of 193 FPS. This is far above the 60 FPS threshold, making Medium a comfortable choice for high-refresh monitors.
Q: Does the RTX 5050 support modern graphics APIs for this game?
A: The GPU supports DirectX 12 Ultimate (12_2), OpenGL 4.6, and Vulkan 1.4. This covers the API requirements for Pc Building Simulator, which is not a demanding title in terms of graphics features.
How This Combo Ranks
The Intel Core i5-13400F and NVIDIA GeForce RTX 5050 combination ranks 2290 out of 3723 tested combos for Pc Building Simulator. This places it in the upper-middle portion of the database, at roughly the 61st percentile of all tested pairings. The rank reflects the fact that this combo delivers solid 1080p and 1440p performance but struggles at 4K on higher presets. Many combos above it likely feature higher-tier GPUs that handle 4K Ultra, while combos below it may fall short of 60 FPS at 1440p.
The data shows that this rank is not a reflection of a weak CPU. The i5-13400F's 22604 score in Cinebench R23 multicore and 3191 in R23 single-core indicate a strong processor. The bottleneck is purely the GPU at higher resolutions. Combo rank in a simulation game like this is heavily weighted toward GPU performance, as the game's logic is not particularly thread-hungry. The 3732 combos tested include many with older or lower-end GPUs, and this pairing's ability to clear 60 FPS at 1440p Ultra puts it ahead of a significant portion of the field. However, the 3723 total combos mean there are 1433 combos ranked above it, likely dominated by faster GPUs.
The Verdict
Yes, this PC can run Pc Building Simulator, but with caveats. The verdict by resolution is clear. At 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with the lowest average being 113 FPS at Ultra. At 2560x1440, all four presets are also playable, with Ultra averaging 71 FPS. At 3840x2160, only Low settings are playable, averaging 78 FPS. Medium, High, and Ultra all fall below the 60 FPS threshold, with averages of 55, 39, and 37 FPS respectively.
For a user with a 1080p or 1440p monitor, this combo is more than adequate. The game will run at maximum settings with frame rates well above 60 FPS, and even at 1440p Ultra, there is headroom for smooth gameplay. For 4K users, the experience is limited. Low settings are playable, but Medium dips to 55 FPS average with a 47 FPS minimum, which will be noticeable. High and Ultra are not viable for a consistent 60 FPS experience. The RTX 5050's 8 GB of VRAM is not the issue here; the 128-bit memory bus and 320.0 GB/s bandwidth are the limiting factors at 4K.
Best Settings per Resolution
At 1920x1080, the best setting is Ultra, which delivers an average of 113 FPS. This is the most demanding preset and it stays well above the 60 FPS threshold, making it the clear choice for maximum visual quality.
At 2560x1440, the best setting is Ultra, with an average of 71 FPS. This clears the 60 FPS threshold with a small margin, but it is playable. Users who prefer a larger buffer for frametime spikes could drop to High at 75 FPS, but Ultra is technically the best playable preset.
At 3840x2160, the best setting is Low, which averages 78 FPS. This is the only preset at 4K that stays above 60 FPS. Medium averages 55 FPS, which is below the threshold, and High and Ultra are not viable. Users with a 4K display should accept reduced visual fidelity or consider a stronger GPU.