Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

67%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
266 FPS
Ultra 1080p Measured
127 FPS

1440p (2K / QHD)

Low 1440p Measured
168 FPS
Ultra 1440p Measured
80 FPS

4K (Ultra HD)

Low 4K Measured
88 FPS
Ultra 4K Measured
42 FPS
7.5ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 27,799
Graphics Card
Required 27,436
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 44 62 88
1440p QHD 80 84 119 168
1080p Full HD 127 133 189 266

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 133
1920x1080 Low 266
1920x1080 Medium 189
1920x1080 Ultra 127
2560x1440 High 84
2560x1440 Low 168
2560x1440 Medium 119
2560x1440 Ultra 80
3840x2160 High 44
3840x2160 Low 88
3840x2160 Medium 62
3840x2160 Ultra 42

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 4060 is a balanced mid-range combination that handles Pc Building Simulator with room to spare at most common resolutions. Benchmark data shows this combo delivers playable frame rates across the board, with the only compromise required at 4K where Ultra settings fall below the 60 FPS threshold. The measurements indicate a system that is clearly GPU-bound at higher resolutions, while the CPU’s strong single-thread performance keeps frame rates high at 1080p.

Best Settings per Resolution

At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is Medium, which delivers an average of 62 FPS. This is a narrow margin above the 60 FPS target, but it is consistent enough to be considered playable. The Low preset at 4K yields 88 FPS, but the jump to High drops the average to 44 FPS, and Ultra falls further to 42 FPS. The data shows that Medium is the practical ceiling for a smooth 4K experience with this hardware.

At 2560x1440 (1440p), the situation improves significantly. The Ultra preset achieves an average of 80 FPS, making it the best settings choice that clears the 60 FPS bar with a comfortable margin. Every preset at this resolution—Low at 168 FPS, Medium at 119 FPS, and High at 84 FPS—exceeds the playable threshold. The scaling from High to Ultra is modest, dropping from 84 FPS to 80 FPS, which suggests the GPU still has headroom at this resolution.

At 1920x1080 (1080p), the Ultra preset runs at an average of 127 FPS, which is the clear best choice. The lower presets are almost redundant here: Low hits 266 FPS, Medium reaches 189 FPS, and High sits at 133 FPS. Even the most demanding setting is nearly double the 60 FPS target, indicating the system is nowhere near its limit at this resolution. The recommendation is simple: max out the settings and enjoy the high frame rates.

CPU and GPU Roles

The performance scaling across resolutions reveals a system that shifts from GPU-limited at 4K to increasingly CPU-capable at 1080p. At 3840x2160, the difference between Low and Ultra is stark: 88 FPS versus 42 FPS, a gap of 46 FPS. This large delta indicates the GPU is the primary constraint, as the render load at 4K overwhelms the RTX 4060’s 8 GB GDDR6 memory and 128-bit bus. The CPU, with its 10 cores and 16 threads, has plenty of headroom to feed the GPU at this resolution.

Moving to 2560x1440, the scaling tightens. Low runs at 168 FPS, while Ultra drops to 80 FPS, a difference of 88 FPS. The fact that even Ultra stays well above 60 FPS suggests that the GPU is still the limiting factor, but the CPU is doing more work relative to 4K. The i5-12600KF’s boost clock of 4.90 GHz and strong single-thread performance (a 3dmark single-thread score of 1016) ensure that frame times remain consistent, as evidenced by the Medium preset’s minimum of 101 FPS at this resolution.

At 1920x1080, the CPU’s role becomes more prominent. The gap between Low (266 FPS) and Ultra (127 FPS) is 139 FPS, but even the lowest preset’s frame rate is so high that the CPU is likely the limiting factor. The i5-12600KF’s 3dmark 8-thread score of 6128 and Cinebench R23 multi-core score of 23391 indicate it can handle the simulation logic of Pc Building Simulator without bottlenecking the GPU. The RTX 4060, which ranks in the 61st percentile among all GPUs, is more than sufficient for this title at 1080p, so the CPU becomes the ceiling for maximum frame rates.

Measured FPS Breakdown

3840x2160 (4K):

  • Low: average 88 FPS, no min/max data
  • Medium: average 62 FPS, minimum 53 FPS, maximum 72 FPS
  • High: average 44 FPS, no min/max data
  • Ultra: average 42 FPS, no min/max data

The Medium preset at 4K shows a minimum of 53 FPS, which dips below the 60 FPS playable threshold, but the average of 62 FPS indicates that these dips are not sustained. The gap between High and Ultra is negligible—just 2 FPS—suggesting that Ultra’s additional effects are not well optimized at this resolution.

2560x1440 (1440p):

  • Low: average 168 FPS, no min/max data
  • Medium: average 119 FPS, minimum 101 FPS, maximum 137 FPS
  • High: average 84 FPS, no min/max data
  • Ultra: average 80 FPS, no min/max data

At 1440p, the Medium preset’s minimum of 101 FPS is well above the playable threshold, making it a rock-solid choice. The drop from High to Ultra is only 4 FPS, which is within the margin of variance, so users can safely enable Ultra without a noticeable performance hit.

1920x1080 (1080p):

  • Low: average 266 FPS, no min/max data
  • Medium: average 189 FPS, minimum 160 FPS, maximum 217 FPS
  • High: average 133 FPS, no min/max data
  • Ultra: average 127 FPS, no min/max data

The 1080p results are uniformly excellent. Even the Medium preset’s minimum of 160 FPS is more than double the playable threshold. The data shows a smooth scaling curve from Low to Ultra, with no sudden drops, indicating that the hardware is well-matched for this title at 1080p.

The Verdict

This PC can absolutely run Pc Building Simulator. The verdict by resolution is clear: at 1920x1080, all four presets—Low, Medium, High, and Ultra—are playable, with Ultra delivering 127 FPS. At 2560x1440, all presets also clear the 60 FPS bar, and Ultra runs at 80 FPS. The only compromise is at 3840x2160, where Low and Medium are playable (with Medium at 62 FPS), but High and Ultra fall short at 44 FPS and 42 FPS, respectively.

For users with a 1080p or 1440p monitor, the recommendation is straightforward: enable Ultra settings and enjoy frame rates well above the 60 FPS target. At 4K, the system is still usable, but users must accept Medium settings as the highest playable preset. The RTX 4060’s 8 GB VRAM and 272.0 GB/s bandwidth are sufficient for this simulation game, but not for pushing maximum detail at 4K. The i5-12600KF, with its 10 cores and 16 threads, never appears to be a bottleneck in these measurements, even at the highest frame rates.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU and GPU provides context for how other builds might perform. The Intel Core i9-10900K has an average benchmark score of 27872, which is 0.3% lower than the i5-12600KF’s average of 27799. This means a system with an i9-10900K would behave nearly identically in Pc Building Simulator, with the same frame rates within a rounding error. Similarly, the AMD Ryzen 7 5800X3D scores 27896, just 0.3% higher, so it would offer essentially the same gameplay experience. The AMD Ryzen 5 8500GE (score 27712, 0.3% lower) and AMD Ryzen 7 6800U (score 27887, 0.3% lower) are also within a hair of the i5-12600KF’s performance, meaning any of these CPUs would deliver comparable results in this game.

On the GPU side, the RTX 4060’s nearest rivals are surprisingly varied. The AMD Radeon HD 7790 has an average score of 17666, which is 0.2% higher than the RTX 4060’s 17639, so it would produce nearly identical frame rates, though it lacks modern features like ray tracing. The AMD Radeon 780M (score 17588, 0.3% lower) and AMD Radeon Pro 560 (score 17551, 0.5% lower) are also close matches. The AMD Radeon Pro 460 (score 17509, 0.7% lower) is slightly behind but still within a negligible margin. In practice, swapping the RTX 4060 for any of these would result in a similar experience in Pc Building Simulator, though the RTX 4060’s 24 RT cores and 96 tensor cores give it an edge in other, more demanding titles.

How This Combo Ranks

The Intel Core i5-12600KF and NVIDIA GeForce RTX 4060 combination ranks 2006th out of 3723 tested combos in Pc Building Simulator. This places it in the 54th percentile of all tested systems, meaning it outperforms slightly more than half of the configurations in the database. The ranking is respectable for a mid-range pairing, and the measured FPS data confirms that this combo is well-suited for the game. The CPU’s 79th percentile ranking among all CPUs and the GPU’s 61st percentile ranking among all GPUs suggest that the CPU is the stronger component relative to its peers, but the GPU is still capable enough to deliver high frame rates at 1080p and 1440p.

The rank of 2006 reflects the fact that there are many systems with more powerful GPUs that can push higher frame rates at 4K Ultra, but for the majority of users playing at 1080p or 1440p, this combo delivers a smooth, high-detail experience. The data shows that this is a well-balanced pairing for a simulation title like Pc Building Simulator, where the CPU’s strong multi-threaded performance (Cinebench R23 multi-core score of 23391) and the GPU’s solid 1080p and 1440p capabilities complement each other effectively. Users with this hardware can expect consistent, playable performance across all common resolutions, with the only caveat being 4K Ultra settings.