Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

70%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
284 FPS
Ultra 1080p Measured
135 FPS

1440p (2K / QHD)

Low 1440p Measured
179 FPS
Ultra 1440p Measured
85 FPS

4K (Ultra HD)

Low 4K Measured
94 FPS
Ultra 4K Measured
45 FPS
7ms Frame Time
11ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 19,039
Graphics Card
Required 27,436
Your GPU 26,331

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 47 66 94
1440p QHD 85 90 127 179
1080p Full HD 135 142 201 284

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 142
1920x1080 Low 284
1920x1080 Medium 201
1920x1080 Ultra 135
2560x1440 High 90
2560x1440 Low 179
2560x1440 Medium 127
2560x1440 Ultra 85
3840x2160 High 47
3840x2160 Low 94
3840x2160 Medium 66
3840x2160 Ultra 45

Performance Analysis: Pc Building Simulator on Your System

The Intel Core i5-12400F paired with the NVIDIA GeForce RTX 5060 handles PC Building Simulator without breaking a sweat at 1080p and 1440p, and even clears the 60 FPS playable threshold at 4K on Medium settings. Measured benchmark data shows this combination delivering frame rates that dwarf the demands of a 2019 simulation title, with Ultra presets fully playable at both mainstream resolutions. The data below breaks down exactly where this combo lands, resolution by resolution.

Measured FPS Breakdown

Starting at 1920x1080, the results are emphatic. Low settings produce a 284 FPS average — nearly five times the 60 FPS playable threshold. Medium averages 201 FPS with a minimum of 171 and a maximum of 232, meaning even the worst recorded frame lands well above what most monitors can display. High pushes 142 FPS on average, and even Ultra holds a 135 FPS average.

At 2560x1440, the numbers remain comfortably high. Low averages 179 FPS, Medium averages 127 FPS with a minimum of 108 and a maximum of 146, High averages 90 FPS, and Ultra averages 85 FPS. Every preset at 1440p clears 60 FPS, and all four do so with meaningful headroom — the Ultra result alone sits more than 40 percent above the threshold.

4K is where the spread tightens. Low averages 94 FPS and Medium averages 66 FPS with a minimum of 56 and a maximum of 76. Medium is the best playable setting at 3840x2160 per the verdict data. High falls to 47 FPS and Ultra to 45 FPS — both below the 60 FPS playable line, though not dramatically so. If a 4K player is willing to accept frame rates in the mid-40s, High and Ultra remain borderline options, but the data-driven recommendation is Medium at 66 FPS average, where even the 56 FPS minimum stays close to the threshold.

Across all twelve measured configurations, the Medium preset is the one with full min/avg/max data recorded, which reinforces its role as the reference setting: 201/171/232 at 1080p, 127/108/146 at 1440p, and 66/56/76 at 4K. The gap between minimum and maximum at Medium stays consistent, indicating stable frame pacing rather than erratic swings.

CPU and GPU Roles

The scaling between resolutions tells the story of which component is in charge. At Ultra settings, moving from 1080p to 1440p drops the average from 135 to 85 FPS, and from 1440p to 4K drops it further to 45 FPS. At Medium, the progression runs 201 to 127 to 66 FPS. Frame rate falls steeply and consistently as pixel count rises, which is the signature of GPU-bound behavior: the RTX 5060 is the limiting factor, not the Core i5-12400F.

The Low preset confirms this. Even at 4K, Low delivers 94 FPS — but 1080p Low hits 284 FPS, a threefold difference driven almost entirely by resolution. If the CPU were the bottleneck, raising resolution would flatten frame rates across presets, and it does not. The 12400F's six cores and twelve threads, with a 4.40 GHz boost clock, simply have far more throughput than this 2019 simulation title requires, and the chip's own credentials back that up: a Cinebench R23 multi-core score of 12380, a single-core score of 1680, and a 3DMark single-thread score of 909 place it in the 73rd percentile of all CPUs in the database.

The RTX 5060 sits in the 72nd percentile of all GPUs, with a PassMark G3D score of 20891 and 19.18 TFLOPS of FP32 compute. For a game released in January 2019, that is a comfortable surplus at 1080p and 1440p — the GPU only begins to feel pressure at 4K with High or Ultra settings. In practical terms: at 1080p and 1440p, the pairing is so GPU-strong that any CPU in the 12400F's vicinity would post near-identical results, while at 4K the choice of settings matters far more than the choice between this CPU and its rivals.

FAQ

Q: Can this combo run PC Building Simulator at 60 FPS?

A: Yes, at every resolution up to 1440p on all presets, and at 4K on Low (94 FPS) and Medium (66 FPS). Only 4K High (47 FPS) and 4K Ultra (45 FPS) fall below the 60 FPS threshold.

Q: What is the best settings choice for 4K?

A: Medium, averaging 66 FPS with a minimum of 56 and a maximum of 76 — the highest preset that stays above the playable threshold at 3840x2160.

Q: How fast is this setup at 1080p?

A: Between 135 FPS on Ultra and 284 FPS on Low. Medium averages 201 FPS and never drops below 171 FPS.

Q: Is the CPU or the GPU more important for this game?

A: The GPU. Frame rates scale steeply with resolution across every preset, indicating GPU-bound behavior; the i5-12400F is never the limiting component.

Q: How much FPS is lost going from 1080p to 1440p on Ultra?

A: The average drops from 135 to 85 FPS — still well above 60 FPS, so the resolution jump costs nothing in playability.

Q: Where does the RTX 5060 rank among GPUs?

A: It sits in the 72nd percentile of all GPUs in the database, with an average benchmark score of 26331 and a PassMark G3D result of 20891.

How This Combo Ranks

Out of 3723 tested hardware combinations for PC Building Simulator, this pairing ranks 1648th. That places it just above the halfway mark — but the rank needs context. PC Building Simulator is not a demanding game, and the ranking pool includes configurations far above what this title requires. A rank in the middle of a large field, combined with 135 FPS at 1080p Ultra, means the combo is far stronger than its ordinal position suggests for this specific game.

The correct reading: the 12400F plus RTX 5060 is more than sufficient for PC Building Simulator at any resolution up to 1440p and fully playable at 4K Medium. Higher-ranked combos would deliver higher frame rates in a game that already runs at multiples of 60 FPS on this hardware, so the practical return from climbing the leaderboard here is minimal.

Similar Performance Alternatives

On the CPU side, the i5-12400F's nearest rivals by aggregate score are effectively interchangeable. The AMD Ryzen 5 7535HS matches it exactly at a deltaPct of 0, the Intel Core 3 201E sits at -0.1 percent, the Intel Core i5-1335U at 0.3 percent, and the AMD EPYC 7773X also at 0.3 percent. Since the game is GPU-bound on this pairing, swapping in any of these processors would change results negligibly — the 12400F's 19039 average benchmark score is within a fraction of a percent of all four.

On the GPU side, the RTX 5060's closest competitors cluster just as tightly. The AMD Radeon 860M averages 26401 (-0.3 percent), the NVIDIA GeForce MX550 averages 26421 (-0.3 percent), the AMD Radeon RX 5700 XT 50th Anniversary averages 26553 (-0.8 percent), and the AMD Radeon RX 6750 XT averages 26011 (1.2 percent). Any of these GPUs would deliver PC Building Simulator performance within roughly a frame or two of the RTX 5060 at each measured setting, given deltas of one percent or less.

The takeaway for anyone assembling a system around this game: the neighborhood around this combo is dense with equivalents, and the benchmark data shows no meaningful separation between the RTX 5060 and its four nearest rivals for a title this light.

The Verdict

Yes — this PC runs PC Building Simulator, and comfortably so. The verdict data is unambiguous. At 1920x1080, all four presets are playable, with Ultra as the best setting at 135 FPS average. At 2560x1440, all four presets are again playable, with Ultra as the best setting at 85 FPS average. At 3840x2160, Low and Medium are playable, with Medium as the best setting at 66 FPS average; High and Ultra miss the 60 FPS cut at 47 and 45 FPS respectively.

For 1080p and 1440p players, the recommendation is simple: max out the settings. There is no configuration below 4K that fails, and the Medium-preset minimums of 171 FPS at 1080p and 108 FPS at 1440p show the frame floor is as strong as the average. For 4K players, Medium at 66 FPS is the ceiling of the playable range, with a 56 FPS minimum that occasionally dips just under the threshold — a minor concession on a game where visual fidelity demands are modest.

The hardware itself is well-matched to the task. The i5-12400F brings 73rd-percentile CPU performance, and the RTX 5060 brings 72nd-percentile GPU performance, a balanced pairing for a simulation title from 2019. Ranked 1648th of 3723 combos in this game, the pairing sits mid-field on paper but delivers multiple-times-threshold frame rates in practice. This is a configuration that clears every reasonable bar PC Building Simulator can set.