Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 44 | 44 | 64 | 95 |
| 1440p QHD | 87 | 89 | 127 | 177 |
| 1080p Full HD | 132 | 143 | 198 | 285 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
The Intel Core i5-12400 and NVIDIA GeForce RTX 5060 combination delivers a robust experience in Pc Building Simulator, a simulation title that scales well across hardware tiers. The CPU sits at the 72nd percentile in its class, while the GPU matches that percentile, placing both components in the upper-midrange bracket. Pairing these two creates a balanced system where neither component becomes an obvious bottleneck, though the measured frame rates reveal clear boundaries between resolutions and presets.
Similar Performance Alternatives
The i5-12400’s average benchmark score of 18,683 places it in close competition with several processors that would deliver nearly identical CPU-bound behavior in Pc Building Simulator. The AMD EPYC 7643 scores 18,697, just 0.1% higher, meaning in CPU-limited scenarios you would see virtually indistinguishable performance. The Intel Core i7-1355U trails by a negligible 0.3% with a score of 18,730, while the AMD Ryzen AI 5 330 sits 0.7% ahead at 18,811. On the other side, the Intel Core i3-14100F scores 18,519, which is 0.9% lower — close enough that swapping to that chip would not meaningfully alter frame pacing in this simulation title.
For the GPU, the RTX 5060’s average score of 26,331 finds its nearest rivals within a narrow band. The AMD Radeon 860M scores 26,401, a 0.3% advantage that would translate to nearly identical rasterization performance in Pc Building Simulator’s workload. The NVIDIA GeForce MX550 matches at 26,421, again just 0.3% higher. The AMD Radeon RX 5700 XT 50th Anniversary is 0.8% ahead with 26,553, while the AMD Radeon RX 6750 XT sits 1.2% behind at 26,011. Any of these GPUs would produce very similar results at the same settings and resolution, so the choice between them comes down to features like ray tracing support or driver preferences rather than raw frame rates in this game.
How This Combo Ranks
Out of 3,723 tested combinations, this pairing of the i5-12400 and RTX 5060 ranks 1,796th for Pc Building Simulator. That places it in the upper half of all tested systems, roughly at the 52nd percentile of combinations. The ranking reflects that this is a competent midrange pairing, but not an outlier — many systems with higher-end CPUs or GPUs will post better scores, while a substantial portion of the database lands below this mark. Given that the game is a simulation focused on building PCs rather than an action-heavy shooter, the ranking suggests this combo handles the workload comfortably without being overkill.
Measured FPS Breakdown
At 1920x1080, the RTX 5060 delivers exceptional performance across all presets. Low settings produce an average of 284.6 FPS, Medium drops to 198.1 FPS, High settles at 142.7 FPS, and Ultra still holds 132.2 FPS. These numbers indicate the GPU is barely taxed at this resolution, leaving headroom for background tasks or streaming. The step from Low to Medium costs roughly 30% of the frame rate, while the drop from High to Ultra is a relatively mild 7%, suggesting diminishing returns at the highest preset.
Moving to 2560x1440, the averages remain well above playable thresholds. Low settings hit 177.2 FPS, Medium delivers 126.8 FPS, High produces 89.3 FPS, and Ultra maintains 86.5 FPS. The scaling from 1080p to 1440p is nearly linear — at High settings the frame rate falls from 142.7 to 89.3, a 37% reduction that reflects the increased pixel count. The gap between High and Ultra narrows further here, with only 2.8 FPS separating them, indicating that Ultra at 1440p is just as viable as High.
At 3840x2160, the picture changes dramatically. Low settings still achieve 94.9 FPS, which is comfortably playable, and Medium drops to 64.4 FPS — just above the 60 FPS threshold. High settings fall to 43.5 FPS, and Ultra is nearly identical at 43.8 FPS. The 4K resolution roughly halves the 1440p performance, and the difference between Low and Medium is a substantial 30.5 FPS, showing that the GPU’s 8 GB GDDR7 memory and 128-bit bus start to become limiting factors at this pixel density. The fact that High and Ultra produce nearly identical results at 4K suggests the game’s higher presets do not add much beyond Medium at this resolution.
The Verdict
This system can absolutely run Pc Building Simulator, and the data confirms it excels in most scenarios. At 1920x1080, every preset from Low to Ultra clears 60 FPS with massive margins — even Ultra maintains 132.2 FPS, more than double the playable threshold. At 2560x1440, the same holds true: all four presets exceed 60 FPS, with Ultra averaging 86.5 FPS. The 4K resolution is where limits appear. The RTX 5060 handles Low at 94.9 FPS and Medium at 64.4 FPS, both above the 60 FPS threshold, but High and Ultra fall to 43.5 and 43.8 FPS respectively, which are below playable levels.
The verdictByResolution data confirms this: at 3840x2160, only Low and Medium are considered playable, with Medium being the best setting at 64.4 FPS average. At 2560x1440, all four settings qualify as playable, and Ultra is the best choice at 86.5 FPS. At 1920x1080, every preset is playable with Ultra recommended at 132.2 FPS. For a smooth 60 FPS experience, stick to Medium at 4K or Ultra at either lower resolution. Players who prioritize frame rate over fidelity should drop to Low at 4K to nearly double the Medium result.
CPU and GPU Roles
The division of labor between the i5-12400 and RTX 5060 shifts noticeably across resolutions. At 1080p, the CPU exerts more influence because the GPU can render frames faster than the processor can feed it. The jump from 284.6 FPS at Low to 132.2 FPS at Ultra shows that lowering settings reduces GPU load, but the CPU still has to keep up with the game’s simulation logic. The i5-12400’s 6 cores and 12 threads, boosted up to 4.40 GHz, are sufficient here — the data shows no signs of CPU throttling, as even the highest frame rates remain stable.
At 1440p, the balance tips toward the GPU. The frame rate drops from 177.2 FPS at Low to 86.5 FPS at Ultra, a 51% reduction that aligns with the increased rendering workload. The CPU still has headroom, as evidenced by the modest gap between High (89.3 FPS) and Ultra (86.5 FPS) — only 3% difference, suggesting the GPU is the primary constraint at these settings. The RTX 5060’s 19.18 TFLOPS of FP32 compute and 448.0 GB/s memory bandwidth are being utilized more fully here.
At 4K, the GPU is unquestionably the bottleneck. The difference between Low (94.9 FPS) and Medium (64.4 FPS) is 32%, while High (43.5 FPS) and Ultra (43.8 FPS) barely move. This pattern indicates that the game’s medium preset at 4K pushes the GPU to its limit, and higher presets add little visual benefit relative to their performance cost. The CPU’s role diminishes to near irrelevance at this resolution — even a weaker processor would likely produce similar frame rates because the RTX 5060 is the limiting factor. The scaling between resolutions — roughly 50% fewer frames at 4K versus 1440p at equivalent settings — reinforces that pixel throughput, not processor speed, determines performance here.
FAQ
Q: Can the RTX 5060 handle Pc Building Simulator at 4K?
A: Yes, but only at Low or Medium settings. The measured averages are 94.9 FPS at Low and 64.4 FPS at Medium. High (43.5 FPS) and Ultra (43.8 FPS) fall below the 60 FPS playable threshold, so those presets are not recommended at 3840x2160.
Q: What is the best preset at 1440p for this combo?
A: Ultra is the best setting at 2560x1440, with an average of 86.5 FPS. All four presets — Low (177.2 FPS), Medium (126.8 FPS), High (89.3 FPS), and Ultra (86.5 FPS) — exceed 60 FPS, so you can choose based on visual preference without worrying about playability.
Q: How does the i5-12400 compare to the AMD EPYC 7643?
A: The EPYC 7643 scores 18,697 in the average benchmark, which is 0.1% higher than the i5-12400’s 18,683. In Pc Building Simulator, this difference would be imperceptible — both CPUs deliver the same practical performance.
Q: Is the RTX 5060 significantly faster than the RX 6750 XT?
A: The RTX 5060 scores 26,331, which is 1.2% higher than the RX 6750 XT’s 26,011. This translates to a negligible frame rate advantage in this game — you would not notice the difference in real-world gameplay.
Q: What frame rate can I expect at 1080p with Ultra settings?
A: The measured average is 132.2 FPS at 1920x1080 with Ultra settings. This is more than double the 60 FPS threshold, so the game will run very smoothly even during intense PC-building activities.
Q: Does the CPU bottleneck the GPU at 4K?
A: No. At 3840x2160, the GPU is the limiting factor. The frame rates at High (43.5 FPS) and Ultra (43.8 FPS) are nearly identical, which indicates the RTX 5060 has reached its rendering ceiling. The i5-12400 has ample headroom to feed the GPU at this resolution.