Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 85 | 89 | 123 | 175 |
| 1440p QHD | 164 | 169 | 229 | 261 |
| 1080p Full HD | 230 | 234 | 264 | 303 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
# FAQ
Q: Can the Intel Core i5-11400F and NVIDIA GeForce RTX 5090 run Pc Building Simulator at 4K?
A: Yes, the combo is fully playable at 3840x2160 across all settings. The recorded average frame rates are 88.5 FPS on High, 175 FPS on Low, 123.4 FPS on Medium, and 84.8 FPS on Ultra, all of which clear the 60 FPS playable threshold.
Q: What is the strongest performance this combo delivers in the game?
A: The highest recorded average frame rate is 302.7 FPS at 1920x1080 with Low settings. At the opposite end, the most demanding scenario is 3840x2160 with Ultra settings, where the average drops to 84.8 FPS, still comfortably above the 60 FPS threshold.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Intel Core i5-11400F sits at the 71st percentile among all CPUs. Its average benchmark score is 17177, which is 0.3% above the AMD EPYC 7H12 (17120) and 0.6% above the Intel Core Ultra 7 164U (17074). It trails the Intel Core i5-12450H by 0.4% (17239) and the AMD Ryzen 3 PRO 8300G by 0.6% (17278).
Q: Is the RTX 5090 a top-tier GPU according to the database?
A: The NVIDIA GeForce RTX 5090 ranks in the 92nd percentile among all GPUs, with an average benchmark score of 79842. Its nearest rival, the NVIDIA Tesla P100 PCIe 16 GB, scores 79605, a delta of 0.3%, while the AMD Radeon Pro Vega 64X scores 80959, putting the RTX 5090 1.4% behind it.
Q: Which component limits performance more in this game at higher resolutions?
A: The data shows the GPU becomes the dominant factor at 4K. At 3840x2160, dropping from Low to Ultra reduces the average frame rate from 175 FPS to 84.8 FPS, a 51.5% performance swing. At 1920x1080, the same settings change only drops from 302.7 FPS to 230.1 FPS, a 24% reduction, indicating the CPU has more headroom relative to the GPU at lower resolutions.
Q: What is the best settings choice for a 60 FPS target at each resolution?
A: The verdict by resolution lists all four settings (High, Low, Medium, Ultra) as playable at every resolution. The best settings for maximum visual quality are Ultra at all three resolutions, yielding 84.8 FPS at 4K, 163.6 FPS at 1440p, and 230.1 FPS at 1080p.
CPU and GPU Roles
The benchmark data for Pc Building Simulator reveals a clear shift in component dominance as resolution changes. At 1920x1080, the frame rates across settings are remarkably high, with Low settings producing 302.7 FPS and Ultra still delivering 230.1 FPS. This narrow 24% gap between the lowest and highest presets suggests the Intel Core i5-11400F provides enough throughput to keep the NVIDIA GeForce RTX 5090 well-fed, and the GPU is not the primary constraint at this resolution. The CPU's 6 cores and 12 threads, combined with a boost clock of 4.40 GHz, appear sufficient to drive the simulation's logic without bottlenecking the graphics pipeline.
Moving to 2560x1440, the scaling pattern changes. Low settings yield 260.7 FPS, Medium drops to 228.6 FPS, High falls to 168.6 FPS, and Ultra bottoms out at 163.6 FPS. The drop from Low to Ultra here is 37.2%, a larger spread than at 1080p, indicating the GPU is starting to exert more influence as the pixel count increases. However, even at the most demanding preset, the frame rate remains well above the 60 FPS threshold, demonstrating that the RTX 5090's 32 GB of GDDR7 memory and 1.79 TB/s bandwidth are more than adequate for this workload at this resolution.
At 3840x2160, the GPU's role becomes unmistakable. The frame rate at Low settings is 175 FPS, but Medium drops to 123.4 FPS, High to 88.5 FPS, and Ultra to 84.8 FPS. The gap between Low and Ultra is now 51.5%, more than double the relative spread seen at 1080p. This pattern indicates that at 4K, the RTX 5090's rendering workload dominates the performance equation, while the CPU's contribution diminishes in relative terms. The 84.8 FPS result at Ultra is still playable, but the scaling curve shows that resolution increases amplify the GPU's importance substantially.
The data suggests a complementary relationship: the CPU handles the simulation's logic and scene management, while the GPU renders the visual output. At lower resolutions, the CPU can keep pace with even the fastest GPU output, but at 4K, the GPU's fill rate and shading capabilities become the limiting factor. The RTX 5090's 21760 shading units and 423.6 GPixel/s pixel rate are the likely drivers of the observed 4K performance, while the i5-11400F's 12 MB shared L3 cache and dual-channel DDR4 memory support provide sufficient data throughput for the simulation's demands.
How This Combo Ranks
The combination of the Intel Core i5-11400F and NVIDIA GeForce RTX 5090 ranks 320th out of 3723 tested combos in Pc Building Simulator, placing it in the top 8.6% of all configurations recorded in the database. This rank reflects the synergy between a mid-range 11th Gen CPU and a flagship Blackwell GPU, where the GPU's raw compute power boosts the overall performance despite the CPU's more modest specifications.
This ranking is notable because the CPU sits at the 71st percentile among all processors, while the GPU occupies the 92nd percentile among all graphics cards. The combination outperforms what either component would suggest individually, indicating the i5-11400F does not meaningfully hold back the RTX 5090 in this simulation title. The CPU's 14340 Cinebench R23 multicore score and 2024 single-core score provide enough processing headroom for the game's logic, while the GPU's 39650 Passmark G3D score handles the visual rendering.
The rank of 320 out of 3723 means the vast majority of tested configurations, including those with newer CPUs or different GPU pairings, deliver lower frame rates in this game. This is a strong result for a CPU that was released in 2021 and is now marked as end-of-life in production status. The data shows that for Pc Building Simulator specifically, the pairing is highly effective, likely because the game does not demand extreme CPU throughput, allowing the RTX 5090 to operate near its full potential.
Similar Performance Alternatives
Looking at the recorded data for the CPU, the Intel Core i5-11400F's nearest rivals in average benchmark score are the AMD EPYC 7H12 (17120, 0.3% lower), Intel Core i5-12450H (17239, 0.4% higher), AMD Ryzen 3 PRO 8300G (17278, 0.6% higher), and Intel Core Ultra 7 164U (17074, 0.6% lower). In practical terms, any of these processors would deliver nearly identical performance when paired with the RTX 5090 in Pc Building Simulator, with frame rate differences well under 1% in synthetic tests. The Core i5-12450H and Ryzen 3 PRO 8300G offer marginal advantages, while the EPYC 7H12 and Core Ultra 7 164U are essentially equivalent.
For the GPU, the NVIDIA GeForce RTX 5090's nearest rivals include the NVIDIA Tesla P100 PCIe 16 GB (79605, 0.3% lower), NVIDIA Tesla P100 PCIe 12 GB (79396, 0.6% lower), AMD Radeon RX 6850M XT (78940, 1.1% lower), and AMD Radeon Pro Vega 64X (80959, 1.4% higher). These deltas are small enough that a user swapping between these GPUs with the same CPU would see nearly indistinguishable frame rates in Pc Building Simulator. The Radeon Pro Vega 64X holds a slight edge in average score, but the RTX 5090's advantage in features like DirectX 12 Ultimate support and 32 GB of memory may matter more in other titles.
If a user were to substitute any of these nearby alternatives for either component, the measured FPS in this game would likely fall within a few percentage points of the results recorded for the primary combo. The simulation's modest hardware demands mean that even the Tesla P100 offerings, which are data-center oriented, would provide a similar experience at the tested resolutions and settings.
Measured FPS Breakdown
At 3840x2160, the recorded average frame rates are 88.5 FPS on High, 175 FPS on Low, 123.4 FPS on Medium, and 84.8 FPS on Ultra. The spread from Low to Ultra is 90.2 FPS, with the largest single drop occurring between Low and Medium (51.6 FPS). High and Ultra are relatively close, with only a 3.7 FPS difference, suggesting diminishing returns from Medium to High and then to Ultra.
At 2560x1440, the averages are 168.6 FPS on High, 260.7 FPS on Low, 228.6 FPS on Medium, and 163.6 FPS on Ultra. The gap between Low and Medium is 32.1 FPS, while Medium to High drops by 60 FPS, and High to Ultra narrows to just 5 FPS. This indicates that the most significant performance hit occurs when moving from Medium to High settings at this resolution.
At 1920x1080, the averages are 234.2 FPS on High, 302.7 FPS on Low, 264.1 FPS on Medium, and 230.1 FPS on Ultra. The total range is 72.6 FPS, with Low to Medium showing a 38.6 FPS drop, Medium to High a 29.9 FPS drop, and High to Ultra only a 4.1 FPS difference. The pattern across all resolutions is consistent: the biggest performance cost comes from raising settings from Low to Medium, while the Ultra preset exacts a relatively small additional penalty over High.
The data also shows resolution scaling. At Low settings, moving from 1080p to 1440p reduces the average from 302.7 FPS to 260.7 FPS, a 13.9% decrease, and then to 175 FPS at 4K, a 42.2% decrease from 1440p. At Ultra settings, the progression is 230.1 FPS at 1080p, 163.6 FPS at 1440p, and 84.8 FPS at 4K. The performance cost of 4K over 1440p is much larger than 1440p over 1080p, confirming that the GPU is the limiting factor at the highest resolution.
The Verdict
This PC configuration can absolutely run Pc Building Simulator, and it does so with substantial headroom at every tested resolution and settings combination. The verdict by resolution lists all four settings presets as playable at 1920x1080, 2560x1440, and 3840x2160, meaning every scenario clears the 60 FPS playable threshold.
For users targeting 1080p, the best settings are Ultra at 230.1 FPS average, which is nearly four times the playable threshold. At 1440p, Ultra still delivers 163.6 FPS, providing a smooth experience on high refresh rate displays. Even at 4K, the most demanding configuration tested, Ultra settings produce 84.8 FPS, comfortably above 60 FPS and suitable for cinematic play or VRR displays.
The weakest recorded performance is 84.8 FPS at 3840x2160 Ultra, which remains 41% above the playable threshold. The strongest is 302.7 FPS at 1080p Low, which is over five times the threshold. This combo not only runs the game, it runs it with enough margin to accommodate future updates, background tasks, or additional monitor real estate without dropping below playable frame rates. For Pc Building Simulator, the Intel Core i5-11400F and NVIDIA GeForce RTX 5090 form a pairing that exceeds requirements at every quality level and resolution.