Instant compatibility check with FPS benchmarks and optimization tips
Pc Building Simulator
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 65 | 92 | 129 |
| 1440p QHD | 118 | 124 | 175 | 219 |
| 1080p Full HD | 187 | 196 | 225 | 256 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Pc Building Simulator on Your System
How This Combo Ranks
The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 5070 sits at rank 1047 out of 3723 tested combinations in Pc Building Simulator, placing it in the top 28% of all recorded configurations. This is a strong position for a game that leans heavily on simulation logic and asset loading rather than raw graphical horsepower. The rank reflects the balance between a six-core, twelve-thread CPU that still holds its own in simulation workloads and a GPU that lands in the 82nd percentile among all graphics cards in the database.
What makes this ranking notable is the gap between the CPU and GPU percentiles. The i5-10400F sits in the 68th percentile among all processors, while the RTX 5070 reaches the 82nd percentile among all GPUs. In a simulation title like this, the CPU percentile being lower than the GPU percentile suggests the processor is the more likely constraint, yet the overall combo still outperforms the vast majority of tested systems. The data shows that even with a mid-range CPU from 2020, the Blackwell architecture GPU carries the combo to a respectable tier.
CPU and GPU Roles
The measured FPS scaling across resolutions reveals where each component matters most. At 1920x1080, the difference between Low and Ultra settings is 69 FPS (256 down to 187), which indicates the GPU has headroom to spare at this resolution. The CPU's single-thread performance, measured at 688 in 3dMark single thread and 1451 in Cinebench R23 single core, appears sufficient to feed the GPU without creating a visible bottleneck at 1080p.
Moving to 2560x1440, the scaling pattern shifts. Low settings deliver 219 FPS, Medium drops to 175, High to 124, and Ultra to 118. The gap between High and Ultra here is only 6 FPS, suggesting that at this resolution, the GPU begins to matter more for the highest preset, but the CPU still keeps pace. The RTX 5070's 12 GB of GDDR7 memory and 672.0 GB/s bandwidth provide ample data throughput for the simulation's asset streaming at 1440p.
At 3840x2160, the GPU's role becomes dominant. Low settings produce 129 FPS, Medium drops to 92, High to 65, and Ultra to 62. The 67 FPS difference between Low and Ultra at 4K is the largest across all resolutions, showing that the RTX 5070 is the primary driver here. The CPU's 42.7 GB/s memory bandwidth and DDR4 support do not appear to be holding back the system at 4K, as the frame rates remain playable even at the most demanding preset. The data indicates that at 1080p, the CPU matters more relative to the GPU; at 4K, the GPU dominates the performance curve.
Similar Performance Alternatives
The CPU's nearest rivals in the database include the Intel Xeon 6756E with an average score of 14163 (0.2% higher), the Intel Core 7 160UL at 14232 (0.3% lower), the AMD EPYC 7552 at 14115 (0.5% higher), and the AMD Ryzen 3 7320C at 14277 (0.6% lower). These deltas are all within a single percentage point, meaning any of these processors would deliver nearly identical simulation performance in Pc Building Simulator. The EPYC 7552 and Xeon 6756E are server-class parts, which suggests the game's simulation logic does not heavily favor consumer gaming CPUs over enterprise silicon in this specific workload.
On the GPU side, the RTX 5070's nearest rivals are the AMD Radeon Pro 580 (0.1% higher average score), the AMD Radeon Pro WX 7100 (0.8% higher), the AMD Radeon Pro 5300 (1.2% lower), and the NVIDIA RTX A500 Mobile (2% lower). These are all professional or mobile workstation GPUs, which is unusual for a consumer gaming card. The data implies that in this simulation title, the workload does not heavily utilize gaming-specific features like ray tracing cores or tensor cores, so the RTX 5070's 48 RT cores and 192 tensor cores provide less advantage than in other titles. A user with any of these rival GPUs would see nearly identical frame rates in Pc Building Simulator, assuming the CPU remains the same.
The Verdict
The recorded data shows this combo clears the 60 FPS playable threshold at every resolution and preset combination tested. At 3840x2160, the Ultra preset averages 62 FPS, just above the threshold, while High averages 65 FPS and Medium reaches 92 FPS. The 2560x1440 results are comfortably above 60 FPS at all settings, with Ultra averaging 118 FPS and Low reaching 219 FPS. At 1920x1080, even the most demanding Ultra preset holds 187 FPS, and Low exceeds 256 FPS.
The verdict is unambiguous: this PC can run Pc Building Simulator at 4K with Ultra settings and maintain playable frame rates. The minimum recorded FPS at 4K Medium is 78, and at 1440p Medium the minimum is 149, indicating the frame pacing remains stable under load. The only caveat in the data is that at 4K Ultra, the average sits at 62 FPS, which leaves little headroom for demanding scenes, but the minimum FPS was not recorded for that preset, so the worst-case scenario cannot be quantified from the database.
FAQ
Q: Can this system run Pc Building Simulator at 4K?
A: Yes. The database shows 4K Ultra averaging 62 FPS, 4K High at 65 FPS, 4K Medium at 92 FPS, and 4K Low at 129 FPS. All four presets exceed the 60 FPS playable threshold.
Q: Which resolution provides the best experience for this combo?
A: At 2560x1440, the Ultra preset averages 118 FPS, which is well above the playable threshold while still delivering higher visual fidelity than 1080p. The 1440p Medium preset averages 175 FPS with a minimum of 149 FPS, making it the safest choice for consistent frame delivery.
Q: How does the CPU compare to its closest rivals?
A: The Intel Core i5-10400F has an average benchmark score of 14185. Its nearest rivals are the Intel Xeon 6756E (0.2% higher), Intel Core 7 160UL (0.3% lower), AMD EPYC 7552 (0.5% higher), and AMD Ryzen 3 7320C (0.6% lower). All of these processors would deliver nearly identical simulation performance.
Q: Is the GPU the limiting factor at 1080p?
A: No. At 1920x1080, the gap between Low (256 FPS) and Ultra (187 FPS) is 69 FPS, and the CPU's single-thread score of 688 in 3dMark suggests it can keep up with the GPU's demands at this resolution. The bottleneck shifts to the GPU only as resolution increases.
Q: What is the largest frame rate drop between presets?
A: The largest drop occurs at 3840x2160 between Low (129 FPS) and Medium (92 FPS), a 37 FPS reduction. At 2560x1440, the drop from Low to Medium is 44 FPS (219 to 175), and at 1920x1080, the drop from Low to Medium is 31 FPS (256 to 225).
Q: Does the game favor the CPU or GPU more?
A: The data shows the GPU becomes the dominant factor at 4K, where Ultra drops to 62 FPS. At 1080p, the CPU's 68th percentile ranking does not appear to hinder performance. The simulation workload uses the CPU's 12 threads effectively, as indicated by the 3dMark 16-thread score of 4748 versus the 8-thread score of 3929.
Best Settings per Resolution
At 3840x2160, the best setting that stays at or above 60 FPS is Ultra, which averages 62 FPS. This is the most demanding preset available, and it barely clears the threshold. For users who prefer a safety margin, High averages 65 FPS and Medium averages 92 FPS with a minimum of 78 FPS.
At 2560x1440, Ultra averages 118 FPS, which is the most demanding preset and comfortably exceeds the 60 FPS threshold. The minimum FPS at Medium is 149, so even the most cautious user would be satisfied with Ultra.
At 1920x1080, Ultra averages 187 FPS, making it the clear choice for the most demanding settings. The minimum FPS at Medium is 191, and the Ultra preset has no recorded minimum, but the 187 FPS average leaves substantial headroom.
Measured FPS Breakdown
At 1920x1080, the recorded data shows Low averaging 256 FPS, Medium averaging 225 FPS with a minimum of 191 and maximum of 259, High averaging 196 FPS, and Ultra averaging 187 FPS. The 1080p results demonstrate that this combination has significant performance headroom, with all presets far exceeding the 60 FPS playable threshold.
At 2560x1440, Low averages 219 FPS, Medium averages 175 FPS with a minimum of 149 and maximum of 202, High averages 124 FPS, and Ultra averages 118 FPS. The 1440p data shows a more pronounced drop between Medium and High (51 FPS), which suggests the GPU's rendering load increases substantially at this resolution for higher quality settings.
At 3840x2160, Low averages 129 FPS, Medium averages 92 FPS with a minimum of 78 and maximum of 105, High averages 65 FPS, and Ultra averages 62 FPS. The 4K results show the tightest margins, with High and Ultra separated by only 3 FPS. The minimum FPS values for Low, High, and Ultra at 4K were not recorded, so only the Medium preset provides a confirmed floor at this resolution. The data indicates that 4K is the only resolution where the combo approaches the playable threshold, and even then, it remains above it for all presets.