Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

69%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
256 FPS
Ultra 1080p Measured
197 FPS

1440p (2K / QHD)

Low 1440p Measured
218 FPS
Ultra 1440p Measured
154 FPS

4K (Ultra HD)

Low 4K Measured
171 FPS
Ultra 4K Measured
81 FPS
5ms Frame Time
8ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 14,185
Graphics Card
Required 27,436
Your GPU 60,347

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 81 87 120 171
1440p QHD 154 167 195 218
1080p Full HD 197 200 226 256

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 200
1920x1080 Low 256
1920x1080 Medium 226
1920x1080 Ultra 197
2560x1440 High 167
2560x1440 Low 218
2560x1440 Medium 195
2560x1440 Ultra 154
3840x2160 High 87
3840x2160 Low 171
3840x2160 Medium 120
3840x2160 Ultra 81

Performance Analysis: Pc Building Simulator on Your System

Measured FPS Breakdown

The recorded data for Pc Building Simulator with the Intel Core i5-10400F and NVIDIA GeForce RTX 4090 shows a system that delivers high frame rates across every tested resolution and preset combination. At 1920x1080, the average frame rates range from 196.8 FPS on Ultra settings to 256.4 FPS on Low settings. The Medium preset records 226 FPS, while High settings produce 200 FPS. This places the system well above the 60 FPS playable threshold at every setting level for this resolution.

Moving to 2560x1440, the averages remain consistently high. Low settings deliver 218.1 FPS, Medium reaches 194.8 FPS, High produces 166.7 FPS, and Ultra still holds at 153.5 FPS. The gap between Low and Ultra at this resolution is 64.6 FPS, which shows that visual quality scaling has a measurable impact but does not threaten playability at any point.

At 3840x2160, the averages step down further but remain strong. Low settings record 171.4 FPS, Medium drops to 120 FPS, High produces 86.7 FPS, and Ultra settles at 81 FPS. The difference between Low and Ultra at 4K is 90.4 FPS, which is the largest spread across all resolutions in the data. Even the most demanding preset at the highest resolution clears the 60 FPS threshold by a solid margin of 21 FPS.

The database did not record minimum or maximum frame rate values for any of these configurations, so the analysis relies solely on average frame rates. The absence of min/max data means variance and frame pacing cannot be assessed from the recorded metrics, but the average figures alone indicate a consistently smooth experience across all tested scenarios. The overall combo rank for this pairing in the game is 670 out of 3723 tested combinations, placing it in the upper tier of the database.

Best Settings per Resolution

At 1920x1080, the best settings that stay at or above 60 FPS are Ultra, with an average of 196.8 FPS. This is the most demanding preset available, and it still delivers nearly three times the playable threshold. There is no reason to lower settings at this resolution, as even the highest quality option leaves enormous headroom.

At 2560x1440, the best settings are also Ultra, recording 153.5 FPS. The system maintains a 93.5 FPS cushion above the 60 FPS line even at the maximum preset. Users can run the game at full visual quality without any concern for performance drops below playable levels.

At 3840x2160, Ultra remains the best settings option, with an average of 81 FPS. This is 21 FPS above the 60 FPS threshold, which is still a comfortable margin for a simulation title. The verdict data confirms that all four presets (Low, Medium, High, and Ultra) are playable at every resolution, meaning the bottleneck never approaches the playability limit regardless of how demanding the configuration is.

The progression across resolutions is instructive: Ultra averages drop from 196.8 FPS at 1080p to 153.5 FPS at 1440p, then to 81 FPS at 4K. The 4K Ultra result is 42.1% lower than the 1080p Ultra figure, but the absolute performance remains high enough that the best settings are always the correct choice.

CPU and GPU Roles

The data shows that the GPU scaling dominates the performance profile in Pc Building Simulator, but the CPU still contributes meaningfully at lower resolutions. The Intel Core i5-10400F has a percentile rank of 68 among all CPUs, with an average benchmark score of 14185. Its nearest rivals include the Intel Xeon 6756E at 14163 (0.2% higher), the Intel Core 7 160UL at 14232 (0.3% lower), the AMD EPYC 7552 at 14115 (0.5% higher), and the AMD Ryzen 3 7320C at 14277 (0.6% lower). This places the i5-10400F in a tightly clustered group where small benchmark differences translate to negligible real-world impact.

The NVIDIA GeForce RTX 4090, by contrast, sits at the 88th percentile among all GPUs, with an average benchmark score of 60347. Its nearest rivals are the Intel Arc Pro A60 at 60326 (0.0% difference), the AMD Radeon Pro Vega 48 at 60140 (0.3% higher), the AMD Radeon Pro W6600M at 61896 (2.5% lower), and the AMD Radeon PRO V710 at 58657 (2.9% higher). The GPU is operating in a performance class far above the CPU, which is reflected in the frame rate scaling.

The resolution scaling tells a clear story. At 1920x1080, the difference between Low and Ultra is 59.6 FPS (256.4 down to 196.8). At 2560x1440, the same spread is 64.6 FPS (218.1 down to 153.5). At 3840x2160, the spread widens to 90.4 FPS (171.4 down to 81). This increasing sensitivity to settings as resolution rises points to the GPU becoming progressively more important at higher pixel counts.

The CPU role is most visible at 1080p, where the frame rates are highest. The fact that Low settings reach 256.4 FPS at 1080p suggests the CPU can feed frames well beyond typical display refresh rates, and the GPU is not yet the limiting factor at that resolution. As resolution increases to 4K, the GPU workload grows substantially, and the frame rates drop accordingly, indicating that the RTX 4090 is carrying the bulk of the rendering burden while the CPU remains adequate throughout.

The benchmark scores support this division. The i5-10400F scores 10283 in Cinebench R23 multi-core and 1451 in single-core, while the RTX 4090 posts 38194 in Passmark G3D and 26613 in Passmark GPU compute. The GPU's compute and graphics scores are several times higher than the CPU's peak throughput, which aligns with the observation that the system scales more steeply with resolution than with preset changes.

Similar Performance Alternatives

For the CPU, the nearest rivals in the database are all within a narrow band of the i5-10400F's average benchmark score. The Intel Xeon 6756E scores 14163, which is 0.2% above the i5-10400F's 14185. The Intel Core 7 160UL scores 14232, 0.3% below. The AMD EPYC 7552 scores 14115, 0.5% above. The AMD Ryzen 3 7320C scores 14277, 0.6% below. In practical terms, any of these processors would deliver statistically identical frame rates in Pc Building Simulator, since the differences are all under one percent.

For the GPU, the nearest rivals are similarly close. The Intel Arc Pro A60 matches the RTX 4090's average score almost exactly at 60326, a 0.0% difference. The AMD Radeon Pro Vega 48 scores 60140, 0.3% lower. The AMD Radeon Pro W6600M scores 61896, which is 2.5% higher. The AMD Radeon PRO V710 scores 58657, 2.9% lower. These GPU alternatives would produce frame rates within a few percent of the RTX 4090 in this game, though the exact in-game performance would depend on driver optimizations and specific workload characteristics.

The combination of a mid-range CPU with 6 cores and 12 threads alongside a top-tier GPU creates a system where the CPU is the weaker link on paper, but the benchmark data shows that this does not meaningfully constrain performance in Pc Building Simulator. The recorded frame rates at all resolutions and presets exceed 60 FPS, so neither component becomes a bottleneck that pushes the experience below playable levels.

The Verdict

This PC can absolutely run Pc Building Simulator at every tested resolution and preset. The verdict data confirms that all four settings levels (Low, Medium, High, and Ultra) are playable at every resolution. At 1920x1080, Ultra delivers 196.8 FPS. At 2560x1440, Ultra delivers 153.5 FPS. At 3840x2160, Ultra delivers 81 FPS. Every configuration clears the 60 FPS playable threshold, and the lowest recorded average across the entire dataset is 81 FPS at 4K Ultra.

The system's rank of 670 out of 3723 combinations in the game database reflects a high-performing setup, though not the absolute top tier. The RTX 4090's 88th percentile GPU ranking and the i5-10400F's 68th percentile CPU ranking combine to produce a capable machine for this simulation title. Users can confidently select the highest visual quality setting at any resolution and expect smooth frame rates without needing to compromise.

The only consideration is that at 4K Ultra, the 81 FPS average leaves 21 FPS of headroom above the threshold. This is sufficient for a game like Pc Building Simulator, which is not a fast-paced competitive title requiring extremely high refresh rates. For users with 144 Hz or 240 Hz displays at 1080p or 1440p, the frame rates are high enough to take advantage of those refresh rates, particularly at Medium and High settings.

FAQ

Q: What is the highest average frame rate recorded for this system in Pc Building Simulator?

A: The highest recorded average is 256.4 FPS at 1920x1080 with Low settings. This is the top figure across all resolution and preset combinations in the measured data.

Q: Can this system run Pc Building Simulator at 4K Ultra settings?

A: Yes. At 3840x2160 with Ultra settings, the system records an average of 81 FPS, which is 21 FPS above the 60 FPS playable threshold. The verdict data lists Ultra as the best settings option at this resolution.

Q: How does the CPU compare to its nearest rivals in the database?

A: The Intel Core i5-10400F has an average benchmark score of 14185. Its nearest rivals are the Intel Xeon 6756E at 14163 (0.2% higher), the Intel Core 7 160UL at 14232 (0.3% lower), the AMD EPYC 7552 at 14115 (0.5% higher), and the AMD Ryzen 3 7320C at 14277 (0.6% lower). All are within under one percent of each other.

Q: How does the GPU compare to its nearest rivals in the database?

A: The NVIDIA GeForce RTX 4090 has an average benchmark score of 60347. Its nearest rivals are the Intel Arc Pro A60 at 60326 (0.0% difference), the AMD Radeon Pro Vega 48 at 60140 (0.3% lower), the AMD Radeon Pro W6600M at 61896 (2.5% higher), and the AMD Radeon PRO V710 at 58657 (2.9% lower).

Q: Which settings should be used at 2560x1440 for the best experience?

A: Ultra settings should be used at 2560x1440, as they deliver an average of 153.5 FPS. This is the most demanding preset and still provides a 93.5 FPS margin above the 60 FPS threshold.

Q: Is the CPU or GPU more important for this game's performance?

A: The GPU becomes more important as resolution increases. The frame rate spread between Low and Ultra widens from 59.6 FPS at 1080p to 90.4 FPS at 4K, indicating that the RTX 4090 carries increasing workload at higher pixel counts while the i5-10400F remains sufficient throughout.