Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Pc Building Simulator
Simulation 2019

Pc Building Simulator

68%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
346 FPS
Ultra 1080p Measured
263 FPS

1440p (2K / QHD)

Low 1440p Measured
297 FPS
Ultra 1440p Measured
171 FPS

4K (Ultra HD)

Low 4K Measured
187 FPS
Ultra 4K Measured
89 FPS
3.7ms Frame Time
6ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,516
Your CPU 13,494
Graphics Card
Required 27,436
Your GPU 77,712

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 89 94 133 187
1440p QHD 171 179 254 297
1080p Full HD 263 267 304 346

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 267
1920x1080 Low 346
1920x1080 Medium 304
1920x1080 Ultra 263
2560x1440 High 179
2560x1440 Low 297
2560x1440 Medium 254
2560x1440 Ultra 171
3840x2160 High 94
3840x2160 Low 187
3840x2160 Medium 133
3840x2160 Ultra 89

Performance Analysis: Pc Building Simulator on Your System

Can Intel Core i3-12100F + NVIDIA GeForce RTX 5090 D run Pc Building Simulator? Yes, based on measured data, this combination delivers playable frame rates at every tested resolution, including 4K Ultra. The benchmark results show a system with massive GPU headroom, where the CPU becomes the primary scaling factor at lower resolutions, but the GPU still dominates at 4K. The data reveals an interesting pairing: a budget-oriented 4-core CPU with a flagship 32 GB GPU, producing a performance profile that is heavily skewed by the graphics card's capabilities.

Measured FPS Breakdown

The measured FPS data for this combo in Pc Building Simulator shows a clear pattern of extremely high performance across all settings and resolutions. At 1920x1080, the lowest average frame rate recorded is 263 FPS on the Ultra preset, while the Low preset reaches an average of 346 FPS. The Medium preset at this resolution averages 304 FPS, with a minimum of 259 FPS and a maximum of 350 FPS. High settings at 1080p produce an average of 267 FPS.

Moving to 2560x1440, the performance remains exceptionally high but shows expected scaling. The Ultra preset averages 171 FPS, while High settings deliver 179 FPS. Medium settings at 1440p average 254 FPS, with a minimum of 216 FPS and maximum of 292 FPS. The Low preset at this resolution reaches an average of 297 FPS, which is the highest recorded average at 1440p.

At 3840x2160, the data shows the first meaningful drop in performance, though still far above the 60 FPS playability threshold. The Ultra preset averages 89 FPS, while High settings average 94 FPS. Medium settings at 4K produce an average of 133 FPS, with a minimum of 113 FPS and maximum of 153 FPS. The Low preset at 4K averages 187 FPS. Notably, only the Medium preset at each resolution has complete min/max data, while other presets have null values for these metrics in the fact pack.

CPU and GPU Roles

The data indicates a fascinating division of labor between the Intel Core i3-12100F and the NVIDIA GeForce RTX 5090 D. The GPU's percentile ranking of 92 versus the CPU's 68 percentile suggests the graphics card is the dominant component in this pairing. However, the scaling between resolutions tells a more nuanced story about which component matters more in Pc Building Simulator.

At 1920x1080, the gap between Low (346 FPS) and Ultra (263 FPS) is 83 FPS, which represents a 24% reduction in performance when moving to the highest preset. This relatively small difference suggests the CPU is beginning to limit the GPU's potential at lower resolutions, as the 4-core processor cannot feed the RTX 5090 D fast enough to achieve even higher frame rates. The jump from 1080p Low to 1440p Low shows a 49 FPS drop (346 to 297 FPS), which is a 14% decrease.

The more revealing scaling appears between 1440p and 4K. At Ultra settings, the drop from 1440p (171 FPS) to 4K (89 FPS) represents a 48% reduction, indicating the GPU is now the primary bottleneck at higher resolutions. Similarly, High settings show a 47% drop from 179 FPS at 1440p to 94 FPS at 4K. This pattern confirms that the RTX 5090 D becomes the limiting factor at 4K, while the i3-12100F's 4 cores and 8 threads constrain performance at 1080p and, to a lesser extent, 1440p.

The CPU's 3DMark scores support this interpretation. The single-thread score of 893 and 4-thread score of 2859 indicate modest compute capability, while the 8-thread score of 4026 shows near-linear scaling up to 8 threads. In a simulation game like Pc Building Simulator, which likely has limited thread utilization, the CPU's strong single-thread performance (Cinebench R23 single-core score of 1674) helps maintain playable frame rates, but the GPU's raw throughput (PassMark G3D score of 44065) clearly drives the highest frame rates.

Best Settings per Resolution

For 1920x1080, the best settings that remain at or above 60 FPS are Ultra, which achieves an average of 263 FPS. This is the most demanding preset tested, and it still delivers over 4x the playability threshold. The data shows that even at Ultra, the system has enormous headroom, with the average FPS being 203 FPS above the 60 FPS threshold.

At 2560x1440, the Ultra preset again provides the best experience, averaging 171 FPS. This is 111 FPS above the playable threshold, indicating that the system can handle the highest settings at this resolution without any concerns. The Medium preset at 1440p delivers 254 FPS, but Ultra is the better choice given the available performance headroom.

For 3840x2160, the Ultra preset remains the best settings option, averaging 89 FPS. This is 29 FPS above the 60 FPS threshold, meaning the system clears the playability requirement with a comfortable margin. The data shows that all four presets at 4K (Low, Medium, High, Ultra) average above 60 FPS, with even the lowest preset (Ultra at 89 FPS) providing smooth gameplay. The fact pack's verdictByResolution confirms that all settings are playable at every resolution, with Ultra being the best choice at each.

Similar Performance Alternatives

The nearest rivals for the CPU provide context for understanding what other processors would behave similarly. The Intel Core 3 N355 has an average benchmark score of 13492, which is essentially identical to the i3-12100F's 13494, a delta of 0%. This suggests that swapping to the N355 would produce nearly identical CPU-bound performance in Pc Building Simulator. The Intel Core i5-9500 scores 13452, just 0.3% lower, indicating similar capability. The Intel Core 5 120UL scores 13594, which is 0.7% higher, while the Intel Core i7-1250U scores 13351, 1.1% lower.

For the GPU, the nearest rivals show that the RTX 5090 D sits in a performance cluster with several other high-end cards. The AMD Radeon RX 6650M XT scores 76904, which is 1.1% lower than the RTX 5090 D's 77712. The AMD Radeon RX 6850M XT scores 78940, 1.6% higher. The NVIDIA Tesla P100 PCIe 12 GB scores 79396 (2.1% higher), and the Tesla P100 PCIe 16 GB scores 79605 (2.4% higher). These deltas are all within a narrow 3.5% band, meaning that in this game, these GPUs would produce very similar frame rates, differing by only a few FPS at most.

The practical implication is that the RTX 5090 D's performance in Pc Building Simulator is not unique. A system with the RX 6850M XT, for instance, would deliver nearly identical results, with the 4K Ultra average potentially dropping from 89 FPS to around 87-88 FPS based on the 1.6% delta. Conversely, the Tesla P100 PCIe 16 GB might push the 4K Ultra average to approximately 91 FPS.

How This Combo Ranks

The combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 5090 D ranks 112 out of 3723 tested combos in Pc Building Simulator. This places it in the top 3% of all combinations tested, which is remarkable given the CPU's modest specifications. The ranking suggests that for this particular game, the GPU's immense compute power compensates for the CPU's lower thread count and benchmark scores.

The rank of 112 out of 3723 becomes more meaningful when considering the CPU's percentile of 68 versus the GPU's percentile of 92. This 24-point gap indicates that the GPU is carrying the performance load, and the combo's high rank is primarily attributable to the RTX 5090 D. The data implies that pairing the same GPU with a stronger CPU (one in the 90th percentile, for example) would likely push the combo into the top 50, while pairing this CPU with a more modest GPU would result in a significantly lower rank.

The Verdict

This PC can absolutely run Pc Building Simulator, and it does so exceptionally well at every resolution and preset combination tested. The verdictByResolution data confirms that all four settings presets (Low, Medium, High, Ultra) are playable at each resolution, with the best settings being Ultra at all three.

At 3840x2160, the system delivers 89 FPS on Ultra, 94 FPS on High, 133 FPS on Medium, and 187 FPS on Low — all well above the 60 FPS threshold. The 4K Ultra average of 89 FPS provides a 29 FPS buffer, ensuring smooth gameplay even during demanding scenes. The 2560x1440 results are even more impressive, with Ultra averaging 171 FPS, providing a 111 FPS margin above the playability threshold. At 1920x1080, the Ultra preset hits 263 FPS, which is 203 FPS above the threshold, making this resolution essentially effortless for the hardware.

The only caveat is that the minimum FPS data is incomplete for most presets, with only the Medium settings at each resolution reporting min/max values. For 1080p Medium, the minimum is 259 FPS, for 1440p Medium it is 216 FPS, and for 4K Medium it is 113 FPS. These minimums are all comfortably above 60 FPS, suggesting that even worst-case frame drops would remain playable. The data does not reveal minimum FPS for Ultra settings, but given the average is 89 FPS at 4K Ultra, and the Medium preset's minimum is 113 FPS, it is reasonable to expect Ultra minimums would also stay above 60 FPS.

FAQ

Q: What is the highest average FPS this combo achieves in Pc Building Simulator?

A: The highest measured average is 346 FPS at 1920x1080 with Low settings. The 4K Low preset reaches 187 FPS, 1440p Low reaches 297 FPS, and 1080p Medium averages 304 FPS.

Q: Does the system maintain 60 FPS at 4K Ultra settings?

A: Yes, the 4K Ultra preset averages 89 FPS, which is 29 FPS above the 60 FPS playable threshold. All four presets at 4K (Low, Medium, High, Ultra) average above 60 FPS.

Q: How does the CPU compare to its nearest rivals in benchmark scores?

A: The Intel Core i3-12100F has an average benchmark score of 13494. The Intel Core 3 N355 scores 13492 (0% delta), the Intel Core i5-9500 scores 13452 (0.3% lower), the Intel Core 5 120UL scores 13594 (0.7% higher), and the Intel Core i7-1250U scores 13351 (1.1% lower).

Q: What is the performance gap between the GPU and its closest competitor?

A: The AMD Radeon RX 6650M XT is 1.1% slower than the RTX 5090 D, while the AMD Radeon RX 6850M XT is 1.6% faster. The NVIDIA Tesla P100 PCIe 12 GB is 2.1% faster and the 16 GB version is 2.4% faster.

Q: How does this combo rank among all tested configurations?

A: This combination ranks 112 out of 3723 tested combos in Pc Building Simulator, placing it in the top 3% of all configurations tested.

Q: Which component is the bottleneck at 1080p resolution?

A: The data suggests the CPU limits performance at 1080p, as the difference between Low (346 FPS) and Ultra (263 FPS) is only 83 FPS. The GPU's 92nd percentile ranking versus the CPU's 68th percentile indicates the processor cannot fully feed the graphics card at this resolution.