Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

100%
Excellent Match Your system exceeds recommended requirements!

Performance

1080p (Full HD)

Low 1080p Measured
359 FPS
Ultra 1080p Measured
170 FPS

1440p (2K / QHD)

Low 1440p Measured
237 FPS
Ultra 1440p Measured
112 FPS

4K (Ultra HD)

Low 4K Measured
131 FPS
Ultra 4K Measured
62 FPS
4.5ms Frame Time
7ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 53,620
Graphics Card
Required 27,862
Your GPU 79,842

Recommendations

Excellent!

Your system exceeds recommended specs. Enjoy max settings!

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 62 82 106 131
1440p QHD 112 148 192 237
1080p Full HD 170 224 291 359

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 224
1920x1080 Low 359
1920x1080 Medium 291
1920x1080 Ultra 170
2560x1440 High 148
2560x1440 Low 237
2560x1440 Medium 192
2560x1440 Ultra 112
3840x2160 High 82
3840x2160 Low 131
3840x2160 Medium 106
3840x2160 Ultra 62

Performance Analysis: Palworld on Your System

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 5090 delivers an exceptional Palworld experience across all tested resolutions, with every preset at every resolution clearing the 60 FPS playability threshold. The data shows this combo ranks 77th out of 3711 tested combinations, placing it in the top 2% of all systems benchmarked for this title. At 4K Ultra, the hardest workload in the dataset, the combination still produces an average of 62 FPS, while dropping to 1080p Low yields a staggering 359 FPS average, indicating that the system has substantial headroom for future content or more demanding survival titles.

Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, and 3840x2160) and four quality presets (Low, Medium, High, Ultra), though only the Medium preset includes complete min/max FPS figures. At 1920x1080, the combo produces an average of 359 FPS on Low, which drops to 291 FPS on Medium (with a minimum of 248 FPS and maximum of 335 FPS), then 224 FPS on High, and finally 170 FPS on Ultra. The scaling from Low to Ultra at 1080p shows a reduction of 189 FPS, representing a 52.6% performance decrease when maxing out all visual features.

Moving to 2560x1440, the average FPS figures are 237 on Low, 192 on Medium (min 163, max 221), 148 on High, and 112 on Ultra. The gap between Low and Ultra at 1440p is 125 FPS, which is a 52.7% drop—nearly identical percentage scaling to 1080p, suggesting the CPU and GPU combination scales predictably with preset changes at these resolutions. At 3840x2160, the averages are 131 on Low, 106 on Medium (min 90, max 122), 82 on High, and 62 on Ultra. The 4K Low-to-Ultra difference is 69 FPS, a 52.7% reduction, which matches the scaling pattern observed at lower resolutions.

The Medium preset is the only one with complete min/max data across all resolutions. At 4K, the 90 FPS minimum and 122 FPS maximum indicate a 32 FPS variance, while at 1440p the variance is 58 FPS (163 to 221), and at 1080p it is 87 FPS (248 to 335). This increasing variance at lower resolutions suggests that CPU-bound scenarios become more prevalent as resolution decreases, allowing the GPU to render more frames while the CPU struggles to feed it consistently. The 4K Medium minimum of 90 FPS is particularly notable because it remains well above the 60 FPS playability threshold even in the most demanding moments captured by the benchmark.

Best Settings per Resolution

At 3840x2160, the Ultra preset is the most demanding option that stays at or above 60 FPS, producing an average of 62 FPS. This is the tightest margin in the entire dataset, with only 2 FPS of headroom above the playability threshold. The High preset at 4K delivers 82 FPS, which provides more comfort, but the data confirms that Ultra is technically playable at native 4K. For users who prioritize smoothness over absolute visual quality, the Medium preset at 106 FPS offers a substantial 44 FPS improvement over Ultra while still providing a significant visual upgrade over Low.

At 2560x1440, the Ultra preset achieves 112 FPS average, which is well above the 60 FPS threshold and represents the best visual quality available in the game. The jump from Ultra at 1440p to Ultra at 4K is exactly 50 FPS (112 to 62), which illustrates the substantial GPU workload increase from 1440p to 2160p. The 1440p High preset at 148 FPS is the most balanced option for high-refresh-rate displays, as it exceeds 144 Hz, while Ultra at 112 FPS still comfortably drives a 100 Hz panel.

At 1920x1080, the Ultra preset produces 170 FPS average, which is the highest FPS at the most demanding preset across all resolutions. This makes 1080p Ultra the recommended configuration for competitive play or high-refresh-rate monitors, as it clears 165 Hz thresholds. The 1080p Medium preset at 291 FPS and Low at 359 FPS are far beyond what any current display can show, making them impractical for actual gaming but indicative of the massive headroom this combination offers at lower resolutions.

CPU and GPU Roles

The data reveals a clear shift in bottleneck behavior across resolutions. At 1920x1080, the CPU plays a dominant role, as evidenced by the High preset producing 224 FPS and Ultra producing 170 FPS—both figures that exceed what most games can achieve with this GPU, suggesting the i7-14700F's 20 cores and 28 threads are being pushed to their limits. The 1080p Low preset at 359 FPS is particularly telling: this figure is so high that it likely represents the absolute ceiling of the CPU's per-thread performance in Palworld, as the RTX 5090 would be idle waiting for draw calls at such extreme frame rates.

At 2560x1440, the balance shifts toward the GPU, but the CPU still maintains a significant influence. The 1440p Ultra average of 112 FPS is exactly 58 FPS lower than 1080p Ultra at 170 FPS, and this 34.1% reduction is consistent with the increased pixel count (1.78x more pixels from 1080p to 1440p) being partially offset by the CPU still being able to feed frames at this rate. The 1440p Medium minimum of 163 FPS shows that even in CPU-intensive scenes, the system rarely drops below what would be considered extremely high performance.

At 3840x2160, the GPU becomes the clear limiting factor. The 4K Ultra average of 62 FPS is only 50 FPS lower than 1440p Ultra at 112 FPS, and the 4K High average of 82 FPS is 66 FPS lower than 1440p High at 148 FPS. These reductions are proportionally larger than the pixel count increase (2.25x from 1440p to 4K), indicating that the RTX 5090's 32 GB of GDDR7 memory and 104.8 TFLOPS of FP32 performance are being fully utilized. The 4K Low preset at 131 FPS versus 1080p Low at 359 FPS shows a 63.5% reduction, which is the largest percentage drop in the dataset and confirms that at 4K, even the lowest preset cannot escape the GPU's rendering workload.

How This Combo Ranks

The combination ranks 77th out of 3711 tested combos for Palworld, placing it in the 97.9th percentile of all systems benchmarked. This top-2% ranking is consistent with the hardware's individual percentiles: the i7-14700F sits at the 91st percentile among all CPUs, while the RTX 5090 ranks at the 92nd percentile among all GPUs. The game-specific ranking is slightly worse than either component's individual percentile, which suggests that Palworld's engine does not fully utilize the extreme capabilities of this hardware, particularly the RTX 5090's advanced Blackwell 2.0 architecture features.

The gap between the combo's 77th rank and the GPU's 92nd percentile is notable. While 3711 combos include many lower-end pairings, the fact that 76 systems outperform this specific CPU+GPU match in Palworld indicates that some combinations with faster CPUs (or possibly different GPU pairings) achieve higher frame rates in this title. Given that Palworld is a survival game with significant CPU load for world simulation, the i7-14700F's 5.40 GHz boost clock is sufficient, but it may not be the absolute best CPU for maximizing the RTX 5090's potential at lower resolutions where CPU-bound scenarios dominate.

Similar Performance Alternatives

For the CPU, the nearest rivals based on average benchmark scores are the Intel Xeon 6505P at 53701 (0.2% faster than the i7-14700F's 53620), the Intel Xeon Phi 7290 at 53469 (0.3% slower), the AMD Ryzen 9 7900X at 53288 (0.6% slower), and the AMD EPYC 7313P at 53206 (0.8% slower). In Palworld, swapping to any of these CPUs would produce nearly identical performance, with the Xeon 6505P theoretically offering a marginal 0.2% improvement and the EPYC 7313P a 0.8% deficit. The Ryzen 9 7900X is the most relevant alternative for gaming, as it is a mainstream desktop processor that would deliver essentially the same frame rates within 0.6%.

For the GPU, the nearest rivals are the AMD Radeon Pro Vega 64X at 80959 (1.4% faster than the RTX 5090's 79842), the NVIDIA Tesla P100 PCIe 16 GB at 79605 (0.3% slower), the Tesla P100 PCIe 12 GB at 79396 (0.6% slower), and the AMD Radeon RX 6850M XT at 78940 (1.1% slower). The Radeon Pro Vega 64X is the only rival that scores higher than the RTX 5090 in aggregate benchmarks, but this is a workstation card not designed for gaming. The Tesla P100 variants are also datacenter-focused, leaving the RX 6850M XT as the only consumer-oriented alternative, which would be 1.1% slower in general compute and likely similar in Palworld.

FAQ

Q: Can this combo run Palworld at 4K Ultra settings?

A: Yes, the benchmark data shows an average of 62 FPS at 3840x2160 with Ultra settings, which is above the 60 FPS playability threshold. However, this is the tightest margin in the dataset, with only 2 FPS of headroom.

Q: What is the best preset for 1440p gaming with this hardware?

A: The Ultra preset at 2560x1440 delivers 112 FPS average, which is the best visual quality while staying well above 60 FPS. The High preset at 148 FPS is better suited for 144 Hz displays.

Q: How does the combo rank among all tested systems for Palworld?

A: This combination ranks 77th out of 3711 tested combos, placing it in the top 2% of all systems benchmarked for Palworld.

Q: Which component is the bottleneck at 1080p?

A: The CPU is the limiting factor at 1920x1080. Evidence includes the 1080p Low preset producing 359 FPS average, which is so high that it likely represents the i7-14700F's maximum frame-feeding capability, while the GPU waits idle.

Q: At 4K, does the GPU become the primary performance driver?

A: Yes, at 3840x2160 the GPU is clearly the bottleneck. The 4K Ultra average of 62 FPS versus 1440p Ultra at 112 FPS shows a 50 FPS reduction, which is proportionally larger than the 2.25x pixel count increase, indicating the RTX 5090 is fully utilized.

Q: Are there any rival GPUs that outperform the RTX 5090 in aggregate benchmarks?

A: The AMD Radeon Pro Vega 64X scores 80959 versus the RTX 5090's 79842, which is 1.4% higher. However, this is a workstation card, and the nearest consumer alternative is the AMD Radeon RX 6850M XT, which is 1.1% slower.