Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your system exceeds recommended specs. Enjoy max settings!
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 64 | 80 | 100 |
| 1440p QHD | 83 | 111 | 145 | 179 |
| 1080p Full HD | 128 | 169 | 219 | 270 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The Intel Core i7-14700F and NVIDIA GeForce RTX 5070 combination delivers a strong performance profile for Palworld, with the GPU positioned as the primary performance driver at higher resolutions. The data shows that this pairing comfortably exceeds the 60 FPS playability threshold across most settings, though the most demanding Ultra preset at 4K requires a slight compromise.
Similar Performance Alternatives
The CPU and GPU each sit within a tightly contested performance bracket, meaning that several alternative components would deliver near-identical frame rates in Palworld. The Intel Core i7-14700F posts an average benchmark score of 53620, placing it in the 91st percentile of all CPUs. Its closest rival, the Intel Xeon 6505P, scores 53701, a mere 0.2% advantage, which is statistically negligible in gaming workloads. The AMD Ryzen 9 7900X trails by just 0.6% with a score of 53288, while the AMD EPYC 7313P sits 0.8% behind at 53206. For Palworld, any of these processors would produce nearly identical results, as the game’s frame rates at 1080p and 1440p appear predominantly GPU-limited.
On the graphics side, the RTX 5070 achieves an average benchmark score of 40377, ranking in the 82nd percentile of all GPUs. Its nearest rival, the AMD Radeon Pro 580, scores 40318, just 0.1% lower, making it a direct substitute in terms of raw compute. The AMD Radeon Pro WX 7100 is 0.8% behind at 40063, while the AMD Radeon Pro 5300 actually scores slightly higher at 40870, a 1.2% lead. The NVIDIA RTX A500 Mobile, despite being a mobile part, comes within 2% at 39568. For Palworld specifically, these rival GPUs would likely produce similar FPS figures, though the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth may offer advantages in texture-heavy scenes that the synthetic scores do not fully capture.
Best Settings per Resolution
Benchmark results indicate that the most demanding preset maintaining at least 60 FPS varies significantly by resolution. At 1920x1080, the Ultra preset delivers 127.9 FPS, which is the highest playable setting and leaves substantial headroom above the 60 FPS threshold. The Medium preset reaches 218.7 FPS, while High hits 168.5 FPS, and Low peaks at 269.9 FPS. All four presets clear the playability threshold, so users can max out the game without concern.
At 2560x1440, the Ultra preset still holds at 82.6 FPS, making it the best playable setting. High runs at 111.1 FPS, Medium at 144.8 FPS, and Low at 178.9 FPS. The performance drop from 1080p to 1440p is roughly 35% on Ultra, which is consistent with the increased pixel count. The system retains enough headroom that even the most demanding settings remain well above 60 FPS.
The situation changes at 3840x2160. The Ultra preset drops to 46.9 FPS, falling below the 60 FPS playability threshold. The best playable setting at 4K is High, which averages 63.6 FPS. Medium runs at 80.2 FPS, and Low at 99.9 FPS. This represents a significant scaling penalty, with Ultra at 4K being 63% slower than Ultra at 1440p. Users targeting 4K must step down from Ultra to High to maintain smooth gameplay, accepting a 17 FPS reduction from the sub-60 result.
CPU and GPU Roles
The scaling data across resolutions and presets reveals a clear division of labor between the CPU and GPU in Palworld. At 1080p, the CPU’s influence is most pronounced. The Core i7-14700F, with 20 cores and 28 threads, provides enough single-thread performance that the GPU becomes the limiting factor even at Low settings, where the system achieves 269.9 FPS. The gap between Low and Ultra at 1080p is 142 FPS, indicating that the GPU is handling most of the rendering workload while the CPU feeds it frames efficiently.
As resolution increases, the GPU’s role expands. At 1440p, the Ultra preset delivers 82.6 FPS, which is 45.3 FPS lower than at 1080p. This 35% reduction is directly attributable to the higher pixel count taxing the RTX 5070’s 192-bit memory bus and 80 ROPs. The CPU’s workload remains similar, but the GPU’s frame time grows, making the graphics card the dominant factor. At 4K, the pattern continues, with Ultra falling to 46.9 FPS — a 63% drop from 1080p Ultra. The RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are sufficient for High settings at 4K, but the Ultra preset’s additional effects and shadow quality push the GPU past its limit.
The data shows that the CPU, despite being in the 91st percentile, does not bottleneck the GPU at any resolution in Palworld. Even at 1080p Low, where the system reaches 269.9 FPS, the Core i7-14700F’s single-core performance (Cinebench R23 single-core score of 4958) is sufficient to keep up. The GPU, conversely, becomes the sole constraint at 4K Ultra, where it cannot maintain 60 FPS. This suggests that upgrading the GPU would yield the largest performance gains for 4K users, while 1080p users are already near the practical ceiling for this game.
The Verdict
This PC can run Palworld effectively, but the experience depends heavily on the target resolution. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra delivering 127.9 FPS. This is a fully playable configuration with substantial headroom for competitive or high-refresh-rate play. At 2560x1440, the same holds true: every preset exceeds 60 FPS, and Ultra reaches 82.6 FPS. Users with 1440p monitors can max out the game without compromises.
At 3840x2160, the verdict is more nuanced. The Ultra preset fails to meet the 60 FPS target, averaging just 46.9 FPS. However, High settings achieve 63.6 FPS, which is playable, and Medium runs at 80.2 FPS. The data indicates that 4K users should select High or Medium for a smooth experience. The playable settings at 4K are High, Medium, and Low, with High being the best option at 63.6 FPS. Overall, the system is playable at every resolution, but only 1080p and 1440p allow for maximum settings.
FAQ
Q: What is the highest preset that runs above 60 FPS at 1080p?
A: The Ultra preset averages 127.9 FPS at 1920x1080, making it the most demanding playable setting. Low, Medium, and High also exceed 60 FPS, with scores of 269.9, 218.7, and 168.5 FPS, respectively.
Q: Can this system handle 4K gaming at maximum settings?
A: No, the Ultra preset at 3840x2160 averages 46.9 FPS, which is below the 60 FPS playability threshold. High settings are the best playable option at 4K, delivering 63.6 FPS.
Q: How much faster is this combo at 1080p compared to 4K on Ultra?
A: At 1080p Ultra, the system achieves 127.9 FPS, while 4K Ultra drops to 46.9 FPS. This represents an 81 FPS difference, or a 63% performance reduction at the higher resolution.
Q: Which component is the bottleneck at 1440p?
A: The GPU is the primary constraint at 1440p. The RTX 5070 delivers 82.6 FPS on Ultra, while the CPU’s performance in synthetic tests (91st percentile) indicates it is not limiting frame rates. The GPU’s workload scales directly with pixel count, making it the dominant factor.
Q: What is the best setting to use for a 240Hz 1080p monitor?
A: The Medium preset at 1080p averages 218.7 FPS, which is the highest setting that stays above 200 FPS. The Low preset reaches 269.9 FPS, but Medium offers a better visual quality-to-performance balance for high-refresh displays.
Q: How does this combo rank among all tested configurations for Palworld?
A: This combo ranks 682nd out of 3711 tested combinations, placing it in the top 18.4% of all systems. This indicates it is a strong performer, though not in the top tier of configurations.
How This Combo Ranks
The Intel Core i7-14700F and NVIDIA GeForce RTX 5070 combination ranks 682nd out of 3711 tested combos for Palworld, placing it in the 82nd percentile of all systems tested. This ranking reflects the balanced performance of the two components. The CPU’s 91st percentile standing among all processors and the GPU’s 82nd percentile among all graphics cards suggest that the pairing is well matched, with neither component dramatically outclassing the other.
In practical terms, this rank means the system outperforms roughly 82% of tested configurations in Palworld. It sits comfortably above the median, but there are 681 combos that deliver higher frame rates, likely featuring higher-end GPUs such as the RTX 5090 or Radeon RX 7900 XTX. The ranking is particularly strong considering the RTX 5070’s relatively modest 12 GB memory capacity, which could be a limiting factor in other games but does not significantly impact Palworld’s performance. For users seeking a high-refresh 1080p or 1440p experience, this combo delivers excellent results, while 4K users will need to adjust settings to maintain 60 FPS. The data confirms that this is a capable mid-to-high-tier configuration that handles Palworld well across most scenarios.