Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 28 | 36 | 47 | 58 |
| 1440p QHD | 50 | 66 | 85 | 105 |
| 1080p Full HD | 76 | 100 | 130 | 160 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 5050 delivers a solid 1080p and 1440p experience in Palworld, though 4K remains out of reach. At 1920x1080, the combination produces excellent frame rates across all presets, with the Ultra preset averaging 76 FPS, High at 100 FPS, Medium at 130 FPS, and Low reaching 160 FPS. Moving to 2560x1440, the system maintains strong performance at High (66 FPS), Medium (85 FPS), and Low (105 FPS), but drops below the 60 FPS playable threshold at Ultra settings with an average of 50 FPS. At 3840x2160, the RTX 5050 struggles, as even the Low preset averages only 58 FPS, falling just short of the playable threshold, while Medium, High, and Ultra average 47, 36, and 28 FPS respectively. The measured data confirms this is a 1080p and 1440p gaming machine for Palworld, not a 4K solution.
Measured FPS Breakdown
The benchmark data for Palworld shows a clear performance hierarchy across the three tested resolutions. At 1920x1080, the system is never constrained, with the Low preset producing an average of 160 FPS, which represents the highest frame rate recorded in the entire test suite. The Medium preset at this resolution averages 130 FPS with a minimum of 110 FPS and a maximum of 149 FPS, indicating consistent frame pacing even during demanding scenes. High settings at 1080p yield an average of 100 FPS, while the most demanding Ultra preset still maintains a healthy 76 FPS average. The delta between presets at 1080p is substantial: dropping from Ultra to High provides a 24 FPS improvement, while moving from Medium to Low adds another 30 FPS.
At 2560x1440, the RTX 5050 begins to show its limits under the heaviest load. The Low preset averages 105 FPS, which drops to 85 FPS at Medium with a reported range of 73 to 98 FPS. High settings at 1440p still clear the 60 FPS threshold comfortably with an average of 66 FPS. However, the Ultra preset falls to an average of 50 FPS, a 16 FPS reduction from High and a clear indicator that the GPU is now the bottleneck. The scaling from 1080p to 1440p is consistent: High settings lose 34 FPS, Medium loses 45 FPS, and Low loses 55 FPS when moving up in resolution.
The 3840x2160 results paint a different picture entirely. Even at Low settings, the average FPS is 58, which is 2 FPS below the playable threshold of 60 FPS. The Medium preset at 4K averages 47 FPS with a minimum of 40 FPS and a maximum of 54 FPS, showing significant frame dips during intense gameplay moments. High settings at 4K average 36 FPS, while Ultra averages just 28 FPS. The step from 1440p to 4K is punishing: High settings lose 30 FPS, Medium loses 38 FPS, and Low loses 47 FPS. This data indicates that the RTX 5050's 8 GB GDDR6 memory and 128-bit bus are insufficient for the pixel throughput demanded by 4K rendering in Palworld.
CPU and GPU Roles
The benchmark results reveal that the Intel Core i7-14700F is never the limiting factor in Palworld, even at lower resolutions. The CPU's Cinebench R23 multicore score of 35122 and single-core score of 4958 place it in the 91st percentile of all CPUs, providing ample headroom for the game's simulation and AI workloads. The 20-core, 28-thread configuration with a boost clock of 5.40 GHz ensures that Palworld's world simulation, which involves numerous creatures and building interactions, runs smoothly without CPU-induced frame drops.
The RTX 5050, by contrast, is clearly the performance bottleneck at higher resolutions and presets. The GPU's Passmark G3D score of 17326 and 3DMark Steel Nomad DX12 score of 2502 place it in the 66th percentile of all GPUs, indicating mid-range performance. The scaling data confirms this: at 1080p, the system achieves 160 FPS on Low, but at 4K on the same preset, it drops to 58 FPS — a 64% reduction that points squarely at GPU limitations. The gap between 1080p and 1440p performance (e.g., 100 to 66 FPS at High) further illustrates that the GPU's fill rate and memory bandwidth are the primary constraints as resolution increases.
Component roles shift with resolution. At 1080p, the CPU's strong single-thread performance (Passmark single-thread score of 4257) helps maintain high frame rates, but the GPU still governs preset scaling. At 1440p, the GPU's workload increases enough that Ultra settings become unplayable, while the CPU remains underutilized. At 4K, the GPU is overwhelmingly dominant in determining performance, with the CPU's role becoming nearly irrelevant — the 28 FPS average at Ultra is purely a GPU limitation. The data shows no scenario where the i7-14700F holds back the RTX 5050 in Palworld.
Best Settings per Resolution
At 1920x1080, the best settings are Ultra, which averages 76 FPS. This is the most demanding preset that remains at or above the 60 FPS playable threshold, and it provides the highest visual fidelity without sacrificing smoothness. The 16 FPS margin above the threshold offers some buffer for demanding scenes, though players who prioritize absolute smoothness may prefer High at 100 FPS.
At 2560x1440, the best settings are High, which averages 66 FPS. This is the only preset above Medium that clears the 60 FPS threshold at this resolution — Ultra falls to 50 FPS, which is below playable. The 6 FPS margin at High is thinner than at 1080p, so players may experience occasional dips below 60 FPS in busy areas, but the average performance is acceptable. Medium at 85 FPS provides a more comfortable margin for those who prefer consistent frame rates over visual quality.
At 3840x2160, no preset achieves the 60 FPS playable threshold. The closest is Low at 58 FPS, which is 2 FPS short of playable. Even with all settings reduced to their minimum, the RTX 5050 cannot sustain 60 FPS at 4K in Palworld. Players targeting 4K would need to accept sub-60 FPS performance or reduce the resolution, as the data shows no viable 4K configuration for this hardware combination.
Similar Performance Alternatives
The Intel Core i7-14700F's nearest rivals, based on average benchmark scores, include the Intel Xeon 6505P with an average score of 53701 (0.2% lower), the Intel Xeon Phi 7290 at 53469 (0.3% higher), the AMD Ryzen 9 7900X at 53288 (0.6% higher), and the AMD EPYC 7313P at 53206 (0.8% higher). These processors deliver nearly identical CPU-bound performance in Palworld, meaning any of these alternatives would yield similar frame rates in CPU-limited scenarios. The Ryzen 9 7900X is particularly notable as a mainstream desktop alternative that matches the i7-14700F within 0.6%, though its platform requirements differ.
For the GPU, the NVIDIA GeForce RTX 5050's nearest rivals are the AMD Radeon RX Vega M GL with an average score of 21153 (0.6% lower), the AMD Radeon HD 8970M at 21237 (1.0% lower), the AMD Radeon RX 5600 XT at 20713 (1.6% higher), and the NVIDIA RTX A4000 Mobile at 21379 (1.6% lower). The RX 5600 XT is the closest desktop alternative, performing within 1.6% of the RTX 5050, which would translate to nearly identical FPS in Palworld across all resolutions and presets. The RTX A4000 Mobile, despite being a mobile part, also lands within 1.6% of the RTX 5050's performance. Users considering these alternatives should expect the same 1080p and 1440p playability, and the same 4K limitations.
The Verdict
The Intel Core i7-14700F and NVIDIA GeForce RTX 5050 combination can run Palworld, but the experience depends heavily on resolution. At 1920x1080, all four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, with Ultra achieving 76 FPS and High reaching 100 FPS. This resolution offers the best balance of visual quality and performance. At 2560x1440, the system remains playable at Low (105 FPS), Medium (85 FPS), and High (66 FPS), but Ultra falls to 50 FPS, below the playable threshold. At 3840x2160, no preset reaches 60 FPS; even Low averages only 58 FPS, making 4K unplayable by the 60 FPS standard. The verdict is clear: this is a strong 1080p machine, a capable 1440p machine with settings capped at High, and not a 4K gaming solution for Palworld.
FAQ
Q: Can this PC run Palworld at 4K resolution?
A: No. At 3840x2160, the best average FPS is 58 at Low settings, which is below the 60 FPS playable threshold. Medium, High, and Ultra average 47, 36, and 28 FPS respectively.
Q: What is the best settings preset at 1440p for this system?
A: High settings at 2560x1440 average 66 FPS, making it the most demanding preset that stays at or above 60 FPS at this resolution. Ultra averages only 50 FPS and is not playable.
Q: How does the RTX 5050 compare to the RX 5600 XT in Palworld?
A: The RX 5600 XT has an average benchmark score that is 1.6% higher than the RTX 5050, indicating nearly identical performance. Users should expect similar FPS results in Palworld at all resolutions.
Q: Is the i7-14700F a bottleneck for the RTX 5050 in this game?
A: No. The data shows the CPU is not limiting performance; the GPU is the bottleneck at higher resolutions and presets. The i7-14700F's benchmarks place it in the 91st percentile of all CPUs.
Q: What frame rate does Ultra settings achieve at 1080p?
A: Ultra settings at 1920x1080 average 76 FPS, which clears the 60 FPS threshold. This is the best visual preset available at 1080p that remains playable.
Q: At what resolution and settings does the system exceed 100 FPS?
A: The system exceeds 100 FPS at 1920x1080 with Low (160 FPS), Medium (130 FPS), and High (100 FPS) settings. At 2560x1440, only Low achieves over 100 FPS with an average of 105 FPS.