Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

78%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
208 FPS
Ultra 1080p Measured
100 FPS

1440p (2K / QHD)

Low 1440p Measured
137 FPS
Ultra 1440p Measured
67 FPS

4K (Ultra HD)

Low 4K Measured
78 FPS
Ultra 4K Measured
35 FPS
7.6ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 53,620
Graphics Card
Required 27,862
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 35 46 58 78
1440p QHD 67 82 110 137
1080p Full HD 100 131 164 208

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 131
1920x1080 Low 208
1920x1080 Medium 164
1920x1080 Ultra 100
2560x1440 High 82
2560x1440 Low 137
2560x1440 Medium 110
2560x1440 Ultra 67
3840x2160 High 46
3840x2160 Low 78
3840x2160 Medium 58
3840x2160 Ultra 35

Performance Analysis: Palworld on Your System

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 3070 delivers a strong Palworld experience across most common gaming resolutions, with the data showing a clear performance ceiling at 4K. This combination of a 20-core, 28-thread Raptor Lake Refresh processor and an Ampere-based GPU with 8 GB of GDDR6 memory is measured directly in the game, providing a reliable picture of what players can expect. The benchmark results indicate that 1080p and 1440p gaming are thoroughly covered, while 4K requires a compromise on visual fidelity to maintain smooth frame rates.

Best Settings per Resolution

At 1920x1080, this system has ample headroom. The data shows the Ultra preset runs at an average of 100.1 FPS, which is well above the 60 FPS playability threshold. Lower presets push performance even higher, with High at 131.2 FPS, Medium at 163.5 FPS, and Low reaching 208.1 FPS. Given these numbers, Ultra is the recommended setting for 1080p, as it delivers the full visual experience without sacrificing smoothness.

Moving to 2560x1440, the RTX 3070 still handles the game comfortably. The Ultra preset averages 66.9 FPS, which clears the 60 FPS threshold but with less margin than at 1080p. High settings run at 82.4 FPS, Medium at 110.3 FPS, and Low at 136.9 FPS. The verdict data confirms all four presets are playable at this resolution, with Ultra being the best choice for those who prioritize image quality over extra frame rate headroom.

At 3840x2160, the situation changes significantly. The Ultra preset drops to 35.2 FPS, and High is not much better at 45.9 FPS. Medium settings average 57.6 FPS, which is just shy of the 60 FPS target. Only the Low preset manages to stay above the playability threshold, delivering an average of 77.5 FPS. Therefore, the best settings for 4K are Low, as it is the sole preset that maintains a consistent 60 FPS floor according to the measured data.

CPU and GPU Roles

The scaling across resolutions reveals how the workload shifts between the i7-14700F and the RTX 3070. At 1080p, the gap between Low and Ultra settings is substantial—208.1 FPS versus 100.1 FPS—indicating that the GPU is the primary bottleneck. The CPU has enough headroom to feed the graphics card at these frame rates, as evidenced by the i7-14700F’s strong multi-threaded performance metrics, including a Cinebench R23 multi-core score of 35122 and a Geekbench multi-core score of 19620.

As resolution increases to 1440p, the frame rate spread narrows. Low settings produce 136.9 FPS while Ultra produces 66.9 FPS. The relative performance drop from Low to Ultra is smaller than at 1080p, suggesting the GPU is becoming more saturated. The RTX 3070’s 448.0 GB/s memory bandwidth and 20.31 TFLOPS FP32 compute are being utilized more fully at this resolution.

At 4K, the GPU is clearly the dominant factor. The difference between Low (77.5 FPS) and Ultra (35.2 FPS) is over 40 FPS, and even the jump from Medium (57.6 FPS) to High (45.9 FPS) shows steep scaling. The CPU’s role diminishes here; the i7-14700F’s 2.10 GHz base clock and 5.40 GHz boost clock are more than sufficient to keep up with the GPU’s rendering workload. The data indicates that Palworld is heavily GPU-bound at 4K, with the RTX 3070’s 8 GB memory capacity and 256-bit bus becoming limiting factors for high-detail textures.

Similar Performance Alternatives

Looking at the nearest rivals for the CPU, the Intel Core i7-14700F performs almost identically to the Intel Xeon 6505P, which has an average benchmark score of 53701 versus the i7-14700F’s average of 53620—a negligible delta of -0.2%. The AMD Ryzen 9 7900X is also close, scoring 53288, which is 0.6% lower than the i7-14700F. The AMD EPYC 7313P trails slightly at 53206 (0.8% lower), and the Intel Xeon Phi 7290 is marginally ahead at 53469 (0.3% higher). Any of these processors would yield nearly identical frame rates in Palworld, as the game’s performance at higher resolutions is unlikely to be constrained by CPU throughput.

For the GPU, the NVIDIA GeForce RTX 3070’s nearest rival is the NVIDIA Tesla K40c, which scores 17468 on average, about 1.5% higher than the RTX 3070’s 17208 average. The AMD Radeon RX 7600 XT is the closest consumer alternative, with an average score of 17083, just 0.7% lower. The NVIDIA GeForce GTX 690 (17037) and AMD Radeon HD 7970M (17019) are also within 1.1% of the RTX 3070’s score. In practical terms, a system with the RX 7600 XT would deliver nearly the same Palworld performance as the RTX 3070, though the 8 GB memory capacity on both cards could present similar limitations at 4K.

The Verdict

The benchmark data clearly answers whether this PC can run Palworld. At 1920x1080, the system excels, with all presets running far above the 60 FPS threshold. The Ultra preset averages 100.1 FPS, making it the recommended choice for a fully smooth experience. At 2560x1440, the system remains highly capable, with Ultra averaging 66.9 FPS and High at 82.4 FPS. This resolution offers the best balance of visual quality and performance.

At 3840x2160, the system is playable but only at reduced settings. The verdict data lists Low as the sole playable preset, with an average of 77.5 FPS. Medium comes close at 57.6 FPS, but it does not reach the 60 FPS threshold. High and Ultra are not viable options, averaging 45.9 FPS and 35.2 FPS respectively. For 4K gaming, players would need to accept significant visual compromises or consider reducing the resolution.

Overall, this combo delivers a playable experience at all three tested resolutions, but the margin of comfort varies. The i7-14700F’s high single-thread performance (Cinebench R23 single-core score of 4958) and multi-core capability (Cinebench R23 multi-core score of 35122) ensure the CPU is never the limiting factor. The RTX 3070, while a generation old, still provides adequate performance for Palworld at 1080p and 1440p, with 4K requiring careful settings management.

FAQ

Q: Can this system run Palworld at 60 FPS on Ultra settings?

A: Yes, at 1920x1080 the Ultra preset averages 100.1 FPS, and at 2560x1440 it averages 66.9 FPS. At 3840x2160, Ultra is not playable, averaging only 35.2 FPS.

Q: What is the best preset for 4K gaming with this hardware?

A: The Low preset is the only setting that stays above 60 FPS at 3840x2160, averaging 77.5 FPS. Medium is close but falls short at 57.6 FPS.

Q: How does the RTX 3070 compare to the RX 7600 XT in this game?

A: The RX 7600 XT has an average benchmark score of 17083, which is 0.7% lower than the RTX 3070’s 17208. Performance in Palworld would be nearly identical.

Q: Is the CPU or GPU more important for Palworld at 1440p?

A: The GPU becomes the primary factor at 1440p, with frame rates dropping from 136.9 FPS on Low to 66.9 FPS on Ultra. The i7-14700F provides ample headroom, as its multi-core performance is not a bottleneck.

Q: What frame rate can I expect on High settings at 1080p?

A: The High preset at 1920x1080 averages 131.2 FPS, which is well above the playable threshold and leaves room for higher refresh rate monitors.

Q: Does the system meet the 60 FPS threshold at 1440p with all presets?

A: Yes, all four presets—Low, Medium, High, and Ultra—average above 60 FPS at 2560x1440, with Ultra being the lowest at 66.9 FPS.

How This Combo Ranks

The Intel Core i7-14700F and NVIDIA GeForce RTX 3070 combination ranks 1559 out of 3711 tested combos for Palworld, placing it in the upper half of all systems benchmarked. This rank reflects the balance between the CPU’s strong performance (91st percentile among all CPUs) and the GPU’s more modest standing (61st percentile among all GPUs). The i7-14700F’s average benchmark score of 53620 puts it ahead of most processors, while the RTX 3070’s average score of 17208 is respectable but not top-tier.

The ranking suggests that while the CPU is overqualified for this game, the GPU holds the system back from reaching higher tiers. The data shows the system’s 1080p performance is excellent, but the 4K results drag down its overall standing. For players targeting 1440p, this combo offers a compelling experience, as the Ultra preset maintains 66.9 FPS. The rank of 1559 out of 3711 indicates that there are many systems with faster GPUs that would achieve higher frame rates at 4K, but for the vast majority of gaming scenarios, this pairing delivers a solid, playable Palworld experience.