Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 75 | 97 | 120 |
| 1440p QHD | 102 | 135 | 158 | 170 |
| 1080p Full HD | 149 | 165 | 182 | 196 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
FAQ
Q: Is the Intel Core i5-9400 a bottleneck for the NVIDIA GeForce RTX 5080 in Palworld?
A: The recorded data shows the combo achieves 60 FPS or higher at every tested setting across all three resolutions, so the CPU does not drag the experience below playable thresholds. The i5-9400 sits at the 47th percentile versus all CPUs, with a Cinebench R23 multi-core score of 6629, which is sufficient for the frame rates measured.
Q: What is the best resolution and preset combination for this system?
A: At 1920x1080 Ultra the combo averages 149 FPS, at 2560x1440 Ultra it averages 102 FPS, and at 3840x2160 High it averages 75 FPS. The most demanding preset that stays at or above 60 FPS is High at 4K, while Ultra is playable at both 1440p and 1080p.
Q: How does the RTX 5080 compare to its nearest rivals in average benchmark score?
A: The RTX 5080 has an average benchmark score of 56083, which puts it 0.6% ahead of the AMD Radeon 8060S (55757), 0.7% ahead of the AMD Radeon RX 6750 GRE 12 GB (55698), and 2.3% ahead of the AMD Radeon Pro W5700X (54828). The AMD Radeon RX 9070 GRE scores 57367, which is 2.2% higher than the RTX 5080.
Q: Does Palworld run better at 1080p or 1440p with this hardware?
A: The data shows higher frame rates at 1080p across all presets. At Ultra, 1080p delivers 149 FPS versus 102 FPS at 1440p, a difference of 47 FPS. At Medium, 1080p delivers 182 FPS versus 158 FPS at 1440p.
Q: Which component matters more for Palworld at 4K with this combo?
A: The GPU is the dominant factor at 3840x2160. The frame rate drops from 120 FPS on Low to 57 FPS on Ultra, a 63 FPS swing driven almost entirely by graphics load. The CPU's performance is essentially fixed across resolutions, so the RTX 5080 determines the ceiling at 4K.
Q: What is the lowest recorded frame rate in the measured data?
A: The lowest min FPS recorded is 83 FPS, which occurs at 3840x2160 Medium settings. The lowest average FPS is 57 FPS at 3840x2160 Ultra, which is below the 60 FPS playable threshold.
CPU and GPU Roles
Palworld shows a clear shift in component importance as resolution increases. At 1920x1080, the frame rates across presets range from 196 FPS on Low to 149 FPS on Ultra, a spread of 47 FPS. This relatively modest scaling suggests the Intel Core i5-9400 is capable of feeding the RTX 5080 enough data at lower graphical loads, but the GPU still does most of the heavy lifting.
At 2560x1440, the range tightens slightly in percentage terms: 170 FPS on Low to 102 FPS on Ultra, a 68 FPS difference. The CPU's role diminishes as the GPU takes on more pixel work. The i5-9400, with 6 cores and 6 threads and a boost clock of 4.10 GHz, maintains a consistent frame delivery even as the render load increases. Its Cinebench R23 single-core score of 935 and multi-core score of 6629 are adequate for the game's demands at this resolution.
At 3840x2160, the GPU becomes essentially the sole determinant of performance. The average FPS drops from 120 on Low to 57 on Ultra, a 63 FPS reduction. The CPU's contribution is largely static across these settings; the bottleneck at 4K Ultra is the RTX 5080's raw throughput. The GPU's 56.28 TFLOPS FP32 performance and 960.0 GB/s memory bandwidth are what separate the 4K High result of 75 FPS from the 4K Ultra result of 57 FPS.
The scaling between resolutions tells the same story. At Ultra settings, moving from 1080p to 1440p costs 47 FPS (149 to 102), and moving from 1440p to 4K costs another 45 FPS (102 to 57). These are large, consistent drops that point squarely at GPU-bound rendering. The CPU does not show any sign of limiting the system, as the same preset at higher resolutions does not produce a disproportionate collapse beyond what the GPU workload would predict.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates. Low settings average 196 FPS. High settings average 165 FPS. Medium settings average 182 FPS, with a minimum of 154 FPS and a maximum of 209 FPS. Ultra settings average 149 FPS. Every preset at 1080p clears the 60 FPS threshold by a wide margin, and even the most demanding setting stays well above the playable line.
At 2560x1440, performance remains strong across the board. Low settings average 170 FPS. High settings average 135 FPS. Medium settings average 158 FPS, with a minimum of 134 FPS and a maximum of 182 FPS. Ultra settings average 102 FPS. The 1440p results show a larger spread between presets, but every configuration remains comfortably above 60 FPS, with the lowest recorded average being 102 FPS at Ultra.
At 3840x2160, the picture changes. Low settings average 120 FPS. High settings average 75 FPS. Medium settings average 97 FPS, with a minimum of 83 FPS and a maximum of 112 FPS. Ultra settings average 57 FPS, which is the only measured configuration that falls below the playable threshold. The 4K results demonstrate that the RTX 5080 can handle Palworld at high visual quality, but Ultra settings push the GPU past its limit at this resolution.
The minimum and maximum FPS figures are only recorded for Medium settings at each resolution. At 1080p Medium, the range is 154 to 209 FPS. At 1440p Medium, the range is 134 to 182 FPS. At 4K Medium, the range is 83 to 112 FPS. These ranges show consistent frame pacing with no catastrophic dips, which is important for a survival game where sudden frame drops can be disruptive during combat or exploration.
The Verdict
This PC can run Palworld, and it does so exceptionally well at most settings. The verdict by resolution is straightforward. At 3840x2160, the playable settings are High, Low, and Medium. The best playable setting is High, with an average FPS of 75. Ultra at 4K is not playable, averaging 57 FPS, which falls below the 60 FPS threshold.
At 2560x1440, all four settings are playable: High, Low, Medium, and Ultra. The best setting is Ultra, with an average FPS of 102. This gives the user a full range of visual options at 1440p with no compromises needed.
At 1920x1080, all four settings are also playable: High, Low, Medium, and Ultra. The best setting is Ultra, with an average FPS of 149. This resolution offers the highest headroom, making it ideal for high refresh rate displays or for users who want maximum visual fidelity without worrying about frame drops.
The data indicates that the Intel Core i5-9400 paired with the NVIDIA GeForce RTX 5080 is a well-balanced combination for Palworld. The CPU, despite being an older Coffee Lake part from 2018, does not prevent the GPU from reaching high frame rates. The RTX 5080, with its 16 GB of GDDR7 memory and 10752 shading units, carries the system through the game's demanding scenes.
How This Combo Ranks
In the database's measured results, this specific combination of the Intel Core i5-9400 and NVIDIA GeForce RTX 5080 ranks 678th out of 3711 tested combos for Palworld. That places it in the top 18.3% of all configurations tested for this game.
The rank reflects the fact that the RTX 5080 is a very strong GPU, sitting at the 87th percentile versus all GPUs, while the i5-9400 is a mid-range CPU at the 47th percentile versus all CPUs. The combination produces solid frame rates across most settings, but the CPU's lower benchmark scores relative to newer parts likely hold the combo back from a higher rank. The i5-9400's average benchmark score of 2254 is nearly identical to its nearest rivals: the Intel Core i7-1068NG7 at 2259 (0.2% higher), the Intel Core i7-10710U at 2248 (0.3% lower), and the AMD Ryzen 5 PRO 1500 at 2246 (0.4% lower).
The GPU's average benchmark score of 56083 is similarly close to its nearest rivals, with the AMD Radeon RX 9070 GRE at 57367 being the only one notably ahead at 2.2%. This suggests that the combo's rank is more a function of the CPU's modest standing than any GPU deficiency. In practical terms, the system delivers playable performance at every resolution except 4K Ultra, which is a strong result for a CPU that is several generations old.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average FPS of 75. This gives a 15 FPS buffer above the playable threshold. Medium is also viable at 97 FPS, but High offers better visual quality while still maintaining comfortable headroom. Ultra is not recommended at this resolution, as it averages 57 FPS.
At 2560x1440, the most demanding preset that stays at or above 60 FPS is Ultra, with an average FPS of 102. This provides a substantial 42 FPS buffer over the threshold. Users can run the game at its highest visual settings at 1440p without any concern about frame drops, and the system still has plenty of performance left in reserve.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is also Ultra, with an average FPS of 149. This leaves an enormous 89 FPS buffer above the playable threshold. The 1080p Ultra configuration is the best choice for users with high refresh rate monitors, as the average FPS approaches 150 and even the Medium setting's minimum of 154 FPS shows excellent consistency.
For users who prioritize frame rate over visual fidelity, the Low preset at each resolution offers the highest averages: 196 FPS at 1080p, 170 FPS at 1440p, and 120 FPS at 4K. The Medium preset is a balanced middle ground, with 182 FPS at 1080p, 158 FPS at 1440p, and 97 FPS at 4K. The recorded data consistently shows that the system is capable of handling Palworld with room to spare at most settings, with the sole exception being 4K Ultra.