Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

53%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
195 FPS
Ultra 1080p Measured
120 FPS

1440p (2K / QHD)

Low 1440p Measured
165 FPS
Ultra 1440p Measured
75 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
44 FPS
6.5ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 2,254
Graphics Card
Required 27,862
Your GPU 37,648

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 44 58 75 89
1440p QHD 75 101 133 165
1080p Full HD 120 153 185 195

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 153
1920x1080 Low 195
1920x1080 Medium 185
1920x1080 Ultra 120
2560x1440 High 101
2560x1440 Low 165
2560x1440 Medium 133
2560x1440 Ultra 75
3840x2160 High 58
3840x2160 Low 89
3840x2160 Medium 75
3840x2160 Ultra 44

Performance Analysis: Palworld on Your System

The Intel Core i5-9400 paired with the NVIDIA GeForce RTX 4070 is a lopsided but effective combination for Palworld. The CPU is a six-core Coffee Lake part from late 2018, while the GPU is an Ada Lovelace card released in 2023 with a launch MSRP of 599 USD. In the database's measured results, this pairing delivers playable frame rates across all three common resolutions, with the 60 FPS playable threshold cleared at every resolution except 4K Ultra. The recorded data shows a system that leans heavily on the GPU, and the RTX 4070 carries the load.

Measured FPS Breakdown

The measured FPS data for Palworld covers three resolutions and four quality presets: Low, Medium, High, and Ultra. All results are average frame rates recorded by the database.

At 3840x2160, the combo starts at 88.6 FPS on Low. Medium drops to 75 FPS, which still clears the 60 FPS playable threshold. High falls to 57.6 FPS, just under the threshold, and Ultra bottoms out at 44.2 FPS. The pattern is clear: 4K demands more from the GPU than the RTX 4070 can deliver at the highest settings, but the lower presets remain viable.

At 2560x1440, every preset clears 60 FPS. Low runs at 164.6 FPS, Medium at 132.8 FPS, High at 101.2 FPS, and Ultra at 74.5 FPS. The gap between Low and Ultra is large, but even the most demanding setting stays comfortably above the playable threshold. This is the resolution where the combo shows its best balance: the RTX 4070 has enough headroom to handle Ultra, and the i5-9400 does not bottleneck the frame rate at these levels.

At 1920x1080, the results are consistently high. Low averages 195.3 FPS, Medium 184.8 FPS, High 153.4 FPS, and Ultra 119.5 FPS. Even the Ultra preset nearly doubles the 60 FPS threshold. The CPU's six threads are sufficient at 1080p, and the GPU is clearly the dominant factor in these results. The data indicates that Palworld at 1080p is not a challenge for this pairing.

Looking across resolutions, the scaling is smooth. Dropping from 4K to 1440p improves the Ultra preset from 44.2 FPS to 74.5 FPS, a substantial gain. Dropping further to 1080p pushes Ultra to 119.5 FPS. The High preset follows a similar curve, from 57.6 FPS at 4K to 101.2 FPS at 1440p to 153.4 FPS at 1080p. The measured results show consistent behavior with no unexpected dips.

FAQ

Q: Can this PC run Palworld at 4K?

A: Yes, but only on Low and Medium presets. The measured average FPS at 4K is 88.6 on Low and 75 on Medium, both above the 60 FPS playable threshold. High falls to 57.6 FPS and Ultra to 44.2 FPS, so those presets are not playable at 4K.

Q: What is the best 1440p preset for this combo?

A: Ultra is playable at 1440p with an average of 74.5 FPS. Since all four presets (Low 164.6, Medium 132.8, High 101.2, Ultra 74.5) clear 60 FPS, you can select Ultra for the best visual quality without sacrificing playability.

Q: How does the i5-9400 compare to its closest CPU rivals?

A: The i5-9400 has an average benchmark score of 2254. Its nearest rival, the Intel Core i7-1068NG7, scores 2259, a delta of -0.2%, meaning the i5-9400 is essentially on par. The Intel Core i7-10710U (2248, +0.3%) and AMD Ryzen 5 PRO 1500 (2246, +0.4%) are also within a fraction of a percent. The Intel Core i3-10305 (2264, -0.4%) is marginally ahead. In practice, these CPUs would perform indistinguishably in Palworld.

Q: Is the RTX 4070 a strong GPU for this game?

A: The RTX 4070 ranks in the 81st percentile among all GPUs in the database, with an average benchmark score of 37648. Its nearest rival, the NVIDIA Tesla P4, scores 37628 (a 0.1% delta), and the AMD Radeon RX Vega 56 scores 37507 (0.4% delta). The GPU is clearly capable, as shown by the measured FPS results across all resolutions.

Q: What frame rate can I expect at 1080p Ultra?

A: The measured average is 119.5 FPS at 1920x1080 with Ultra settings. This is nearly double the 60 FPS threshold, so the combo has significant headroom for high-refresh-rate monitors.

Similar Performance Alternatives

The closest comparable hardware data provides useful context for both components.

For the CPU, the Intel Core i5-9400's average benchmark score of 2254 places it within 0.4% of four other processors. The Intel Core i7-1068NG7 (2259, -0.2%) is essentially a match, as is the Intel Core i7-10710U (2248, +0.3%). The AMD Ryzen 5 PRO 1500 (2246, +0.4%) and Intel Core i3-10305 (2264, -0.4%) round out the group. Any of these CPUs would deliver nearly identical performance in Palworld, meaning the choice between them comes down to platform and availability rather than frame rate. The i5-9400's six cores and six threads, with a base clock of 2.90 GHz and boost of 4.10 GHz, are adequate for the game's CPU demands, and the measured results confirm that the CPU is not the limiting factor at any resolution.

For the GPU, the NVIDIA GeForce RTX 4070's average benchmark score of 37648 is closely matched by several alternatives. The NVIDIA Tesla P4 (37628, +0.1%) is virtually identical in aggregate score, though it is a data-center part. The AMD Radeon RX Vega 56 (37507, +0.4%) is also within a fraction of a percent, meaning a system with that GPU would produce nearly the same FPS in Palworld. The NVIDIA GeForce RTX 4080 Mobile (38135, -1.3%) is slightly ahead, and the AMD Radeon PRO W6400 (37157, +1.3%) is slightly behind. The RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are more than sufficient for Palworld's textures and geometry at all tested settings.

The practical takeaway: if you own any of these rival components, the FPS results in this article are a reliable estimate for your system. The deltas are all within 1.3%, which is well below the perceptual threshold for frame rate differences.

The Verdict

The database's resolution-specific verdict data is unambiguous. At 1920x1080, all four presets are playable, with Ultra averaging 119.5 FPS. At 2560x1440, all four presets are also playable, with Ultra averaging 74.5 FPS. At 3840x2160, only Low (88.6 FPS) and Medium (75 FPS) clear the 60 FPS threshold; High (57.6 FPS) and Ultra (44.2 FPS) do not.

So the answer is yes: this PC can run Palworld. At 1080p and 1440p, you can use the highest quality preset and stay well above 60 FPS. At 4K, you must compromise with Medium settings to maintain playability, but the visual trade-off is acceptable given the frame rate headroom.

The i5-9400, despite being an older six-core part, does not prevent the RTX 4070 from reaching high frame rates. The GPU is the dominant component in this pairing, and the measured data shows that the CPU keeps up at every resolution tested. If you are building or upgrading specifically for Palworld, this combo is a safe choice for 1080p and 1440p gaming.

How This Combo Ranks

Among the 3711 CPU and GPU combinations tested in the database for Palworld, this pairing ranks 1097th. That places it in the upper portion of tested combos, which is respectable given the CPU's age. The RTX 4070's 81st percentile standing among GPUs is the main driver of this rank, while the i5-9400's 47th percentile among CPUs is the weaker link. The combination works because Palworld is not heavily CPU-bound at the tested settings, and the GPU has enough headroom to compensate for the CPU's modest benchmark scores.

The rank of 1097 out of 3711 places this pairing ahead of the majority of tested combinations. For a system built around a 2018 CPU and a 2023 GPU, this is a strong result. The data suggests that the RTX 4070 is the component to prioritize if you want to improve this rank further; upgrading the CPU alone would yield smaller gains.

Best Settings per Resolution

The goal is the most demanding preset that stays at or above 60 FPS at each resolution, based on the measured average FPS.

At 3840x2160, the best setting is Medium, which averages 75 FPS. Low is also playable at 88.6 FPS, but Medium provides better visual quality while still clearing the threshold. High falls to 57.6 FPS and Ultra to 44.2 FPS, so those are not recommended at 4K.

At 2560x1440, the best setting is Ultra, averaging 74.5 FPS. All four presets clear 60 FPS, so there is no reason to drop below Ultra unless you want higher frame rates for a high-refresh display. If you prefer maximum smoothness, Low at 164.6 FPS or Medium at 132.8 FPS are also viable.

At 1920x1080, the best setting is Ultra, averaging 119.5 FPS. This is the clear recommendation for 1080p. Even at Ultra, the frame rate is nearly double the 60 FPS threshold, so there is ample headroom. The measured data shows that this combo is overkill for 1080p Palworld, which is a good problem to have.

In summary: Medium at 4K, Ultra at 1440p, and Ultra at 1080p are the optimal choices. These settings deliver the best visual quality while maintaining at least 60 FPS average.