Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

32%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
180 FPS
Ultra 1080p Measured
86 FPS

1440p (2K / QHD)

Low 1440p Measured
117 FPS
Ultra 1440p Measured
55 FPS

4K (Ultra HD)

Low 4K Measured
68 FPS
Ultra 4K Measured
32 FPS
8.7ms Frame Time
13ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 2,254
Graphics Card
Required 27,862
Your GPU 17,639

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 32 43 51 68
1440p QHD 55 74 99 117
1080p Full HD 86 115 146 180

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 115
1920x1080 Low 180
1920x1080 Medium 146
1920x1080 Ultra 86
2560x1440 High 74
2560x1440 Low 117
2560x1440 Medium 99
2560x1440 Ultra 55
3840x2160 High 43
3840x2160 Low 68
3840x2160 Medium 51
3840x2160 Ultra 32

Performance Analysis: Palworld on Your System

CPU and GPU Roles

The recorded data for Palworld on this platform shows a clear pattern: the NVIDIA GeForce RTX 4060 is the dominant performance driver, with the Intel Core i5-9400 providing sufficient headroom at every resolution tested. The evidence lies in how frame rates scale with settings changes. At 1920x1080, dropping from Ultra to Low raises the average from 86.1 FPS to 180 FPS, a 109% improvement. This dramatic swing is characteristic of GPU-bound rendering, where the graphics card is doing the heavy lifting and reducing its workload directly translates to higher output.

At 2560x1440, the same pattern holds. The Ultra preset averages 54.7 FPS, while Low reaches 117.3 FPS. The scaling is slightly less aggressive than at 1080p, but still substantial. At 3840x2160, the GPU becomes even more stressed: Ultra drops to 32.4 FPS, and even High only reaches 42.6 FPS. The gap between Low and Ultra at 4K is 35.7 FPS, which is narrower in absolute terms than at lower resolutions, indicating that the GPU is nearing its throughput ceiling.

The CPU's role is harder to isolate because the data does not include CPU-only tests for this game. However, the Intel Core i5-9400's benchmark profile suggests it is not the limiting factor. In Cinebench R23 multicore, it scores 6629, and its single-core score is 935. It sits at the 47th percentile among all CPUs in the database. The fact that the RTX 4060 can push 180 FPS at 1080p Low without the frame rate collapsing indicates that the six-core, six-thread processor can feed the GPU adequately in this title. If the CPU were the bottleneck, we would expect to see smaller frame rate differences between presets, as the GPU would be waiting on the processor.

Resolution scaling reinforces this interpretation. Moving from 1080p to 1440p at High settings reduces the average from 114.5 FPS to 73.8 FPS. Moving from 1440p to 4K at High reduces it further to 42.6 FPS. This consistent drop with increasing pixel count is the signature of a GPU-limited scenario. The RTX 4060, with its 272.0 GB/s memory bandwidth and 15.11 TFLOPS FP32 throughput, is doing the heavy lifting across all tested configurations.

The CPU's performance class is worth noting. The i5-9400 has a base clock of 2.90 GHz and a boost clock of 4.10 GHz, with 9 MB of shared L3 cache. Its nearest rivals in the database, based on average benchmark score of 2254, include the Intel Core i7-1068NG7 at 2259 (0.2% faster) and the Intel Core i3-10305 at 2264 (0.4% faster). These are all mid-range desktop and mobile parts. The i5-9400 is not a high-end processor, but for Palworld, the data indicates that the GPU is the primary determinant of frame rate at every resolution and preset combination.

Best Settings per Resolution

The database's playable threshold is 60 FPS average. Based on the measured data, each resolution has a specific preset that maximizes visual quality while staying at or above this threshold.

At 3840x2160, the only playable setting is Low. The recorded average at Low is 68.1 FPS. Medium drops to 51.3 FPS, High to 42.6 FPS, and Ultra to 32.4 FPS. None of these three higher presets reach the 60 FPS line. The 4K Low preset is the most demanding configuration that remains playable, but it is a substantial visual compromise compared to what the system can achieve at lower resolutions.

At 2560x1440, the best playable setting is High, with an average of 73.8 FPS. This is a comfortable margin above the 60 FPS threshold. Medium averages 98.6 FPS, and Low averages 117.3 FPS, both also playable. Ultra falls short at 54.7 FPS, just under the line. The High preset at 1440p is the optimal balance of visual fidelity and performance for this resolution.

At 1920x1080, every preset is playable. Ultra averages 86.1 FPS, High averages 114.5 FPS, Medium averages 145.6 FPS, and Low hits 180 FPS. The best settings, meaning the most demanding preset that still clears 60 FPS, is Ultra. This is the only resolution where the system can run the game at maximum settings without dropping below the playable threshold. The 86.1 FPS average at Ultra leaves headroom for demanding scenes, although the database does not record minimum frame rates for this title.

FAQ

Q: Can this system run Palworld at 4K resolution?

A: Yes, but only at Low settings. The measured average at 3840x2160 Low is 68.1 FPS, which is above the 60 FPS playable threshold. Medium, High, and Ultra all fall below 60 FPS at this resolution.

Q: What is the best preset for 1440p gaming?

A: High is the most demanding preset that stays playable at 2560x1440, averaging 73.8 FPS. Ultra averages 54.7 FPS and is not playable by the database's 60 FPS standard.

Q: Is the RTX 4060 strong enough for Ultra settings anywhere?

A: Yes, at 1920x1080. The Ultra preset averages 86.1 FPS. At 1440p Ultra averages 54.7 FPS, and at 4K Ultra averages 32.4 FPS, both below the playable threshold.

Q: How much faster is Low compared to Ultra at 1080p?

A: Low averages 180 FPS, while Ultra averages 86.1 FPS. That is a 93.9 FPS difference, meaning Low is more than twice as fast in terms of frame rate.

Q: Does the CPU hold back the GPU in this game?

A: The data does not show evidence of a CPU bottleneck. The i5-9400 scores 6629 in Cinebench R23 multicore and sits at the 47th percentile among all CPUs. Frame rates scale consistently with resolution and preset changes, which indicates GPU-bound performance.

Q: What frame rate can I expect at 1440p Medium?

A: The measured average is 98.6 FPS. This is well above the 60 FPS threshold and provides a significant margin over High settings.

Similar Performance Alternatives

The database lists nearest rivals for both components, allowing for comparisons of hardware that would behave similarly in this title.

On the CPU side, the Intel Core i5-9400 has an average benchmark score of 2254. The closest match is the Intel Core i7-1068NG7 at 2259, which is 0.2% faster. The Intel Core i3-10305 scores 2264, 0.4% faster. The Intel Core i7-10710U scores 2248, 0.3% slower, and the AMD Ryzen 5 PRO 1500 scores 2246, 0.4% slower. Any of these processors would deliver nearly identical CPU-side performance in Palworld. The differences are all within a fraction of a percent, so swapping the i5-9400 for any of these would not meaningfully change the measured frame rates, given that the GPU is the limiting factor.

On the GPU side, the NVIDIA GeForce RTX 4060 has an average benchmark score of 17639. Its nearest rival is the AMD Radeon HD 7790 at 17666, which is 0.2% faster. The AMD Radeon 780M scores 17588, 0.3% slower. The AMD Radeon Pro 560 scores 17551, 0.5% slower, and the AMD Radeon Pro 460 scores 17509, 0.7% slower. These GPUs would produce essentially the same frame rates in Palworld as the RTX 4060, within the margin of measurement noise. The caveat is that the RTX 4060 supports modern features like DirectX 12 Ultimate and 8 GB of GDDR6 memory, which may matter for other games, but for this specific title, the benchmark data suggests comparable performance from these alternatives.

The i5-9400's percentile rank of 47 among all CPUs places it in the middle of the pack. The RTX 4060's percentile rank of 61 among all GPUs places it above average. This combination positions the system as a balanced mid-range platform, with the GPU carrying more of the performance load in Palworld.

The Verdict

This PC can run Palworld, but the playable resolution and settings depend heavily on the target display. The verdict by resolution is clear from the measured data.

At 3840x2160, the system is playable only at Low settings, with an average of 68.1 FPS. This clears the 60 FPS threshold by a slim margin of 8.1 FPS. Players with 4K displays will need to accept significant visual compromises.

At 2560x1440, the system is playable at Low, Medium, and High settings. The best playable preset is High, averaging 73.8 FPS. This is a solid experience with good visual quality and a comfortable frame rate margin. Ultra is not playable at this resolution, averaging 54.7 FPS.

At 1920x1080, the system is playable at all four presets: Low at 180 FPS, Medium at 145.6 FPS, High at 114.5 FPS, and Ultra at 86.1 FPS. This is the resolution where the hardware shines, allowing maximum settings while staying well above the 60 FPS threshold. For the best visual experience, 1080p Ultra is the recommended configuration.

How This Combo Ranks

The database ranks this specific CPU and GPU combination against all other tested combos for Palworld. The Intel Core i5-9400 and NVIDIA GeForce RTX 4060 combination ranks 1984 out of 3711 total combos. This places it in the lower-middle portion of the rankings, at approximately the 53rd percentile of all tested systems.

This ranking reflects the mid-range nature of both components. The CPU sits at the 47th percentile among all CPUs, and the GPU sits at the 61st percentile among all GPUs. The combined ranking of 1984 out of 3711 is consistent with what these individual percentiles would suggest. There are 1727 combos ranked above it and 1983 combos ranked below it in the database.

The ranking does not tell the full story for Palworld specifically, because the game's performance is heavily GPU-bound. The RTX 4060's 61st percentile GPU ranking is more relevant than the CPU's 47th percentile. This means the system performs better in this game than its overall combo rank might suggest, since the GPU is the component that matters most here.

Measured FPS Breakdown

The following table presents the exact measured average frame rates for every resolution and settings combination recorded in the database. Minimum and maximum frame rates were not recorded for this title, so only averages are available.

At 1920x1080:

  • Low: 180 FPS average
  • Medium: 145.6 FPS average
  • High: 114.5 FPS average
  • Ultra: 86.1 FPS average

At 2560x1440:

  • Low: 117.3 FPS average
  • Medium: 98.6 FPS average
  • High: 73.8 FPS average
  • Ultra: 54.7 FPS average

At 3840x2160:

  • Low: 68.1 FPS average
  • Medium: 51.3 FPS average
  • High: 42.6 FPS average
  • Ultra: 32.4 FPS average

The pattern across all resolutions is consistent. Lower settings always produce higher frame rates, and higher resolutions always produce lower frame rates at the same settings. The largest absolute gap between Low and Ultra is at 1080p, where the difference is 93.9 FPS. At 1440p, the gap is 62.6 FPS, and at 4K, it is 35.7 FPS. As resolution increases, the GPU becomes the constraint, and the settings-based scaling compresses.

For players targeting 60 FPS, the data provides clear guidance. At 1080p, all settings qualify. At 1440p, Low, Medium, and High qualify, but Ultra does not. At 4K, only Low qualifies. The system is most comfortable at 1080p, where it has enough headroom to run the game at maximum settings with an average of 86.1 FPS, which is 26.1 FPS above the playable threshold.