Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

31%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
195 FPS
Ultra 1080p Measured
97 FPS

1440p (2K / QHD)

Low 1440p Measured
133 FPS
Ultra 1440p Measured
63 FPS

4K (Ultra HD)

Low 4K Measured
75 FPS
Ultra 4K Measured
36 FPS
7.6ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 2,254
Graphics Card
Required 27,862
Your GPU 17,208

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 45 61 75
1440p QHD 63 87 111 133
1080p Full HD 97 131 165 195

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 131
1920x1080 Low 195
1920x1080 Medium 165
1920x1080 Ultra 97
2560x1440 High 87
2560x1440 Low 133
2560x1440 Medium 111
2560x1440 Ultra 63
3840x2160 High 45
3840x2160 Low 75
3840x2160 Medium 61
3840x2160 Ultra 36

Performance Analysis: Palworld on Your System

Measured FPS Breakdown

At 3840x2160, the Intel Core i5-9400 with NVIDIA GeForce RTX 3070 produces its lowest recorded results. The Low preset averages 75.4 FPS, which is the only setting at this resolution that clears the 60 FPS threshold with meaningful headroom. Medium drops to 60.9 FPS, placing it just above the playable mark. High falls to 45 FPS, and Ultra bottoms out at 35.8 FPS. The gap between Low and Ultra is 39.6 FPS, a substantial swing that shows how heavily the highest presets tax the system at 4K. The recorded data contains no minimum or maximum frame time values for any resolution, so the analysis relies on average FPS alone.

Moving to 2560x1440, the same pattern holds but with considerably more headroom. Low averages 133.1 FPS, Medium reaches 110.5 FPS, and High sits at 86.9 FPS. Ultra remains playable at 63 FPS, which is just 3 FPS above the 60 FPS playability threshold. The spread from Low to Ultra here is 70.1 FPS. Notably, the Ultra preset at 1440p outperforms the High preset at 4K by 18 FPS, which suggests the resolution change matters more than the preset step in this range.

At 1920x1080, the combination performs at its strongest. Low hits 194.6 FPS, Medium reaches 164.6 FPS, and High averages 131 FPS. Ultra still manages 96.9 FPS, which is nearly 37 FPS above the 60 FPS threshold. The difference between 1080p Ultra and 1440p Ultra is 33.9 FPS, while the difference between 1440p Ultra and 4K Ultra is 27.2 FPS. This indicates that each resolution step upward costs roughly a third of the previous headroom.

CPU and GPU Roles

The benchmark results indicate that the RTX 3070 is the dominant component across most tested configurations, but the i5-9400 begins to show its limits at lower resolutions. At 1920x1080, the frame rates are high enough that the six-core, six-thread processor may become the constraining factor, particularly in scenes with many AI-controlled creatures, which is a core gameplay element in Palworld. The CPU's Cinebench R23 multi-core score of 6629 and single-core score of 935 place it in the 47th percentile among all CPUs, meaning it sits below the median. For a survival game that tracks numerous entities simultaneously, this mid-pack standing matters.

The GPU's Passmark G3D score of 22214 and its 61st percentile ranking among all GPUs show a stronger relative position. The RTX 3070's 8 GB of GDDR6 memory on a 256-bit bus with 448.0 GB/s bandwidth provides ample data throughput for texture-heavy scenes. At 3840x2160, the GPU becomes the clear bottleneck: the frame rate drops from 75.4 FPS on Low to 35.8 FPS on Ultra, a 52.5% reduction. The CPU cannot compensate for the GPU's workload at 4K, and the recorded numbers reflect pure rendering limits.

At 2560x1440, the balance shifts. The RTX 3070 still carries most of the load, but the i5-9400 has enough single-thread performance to keep up with the 133.1 FPS Low preset result. The Ultra preset at 63 FPS suggests the system is approaching a balanced state where both components contribute. At 1920x1080, the CPU's role grows further. The 194.6 FPS Low result is high enough that the processor's six threads may be the limiting factor in crowded areas, though the database does not separate CPU-bound from GPU-bound frames.

The scaling between resolutions provides additional insight. From 1080p to 1440p, the Low preset drops from 194.6 to 133.1 FPS, a 31.6% reduction. From 1440p to 4K, the same preset drops from 133.1 to 75.4 FPS, a 43.4% reduction. The larger percentage drop at higher resolutions confirms the GPU's increasing dominance. The CPU's Cinebench R20 multi-core score of 2784 and single-core score of 392 further illustrate its mid-range positioning, while the RTX 3070's 3DMark Steel Nomad DX12 score of 3162 shows a GPU that is capable of sustained high-resolution work.

FAQ

Q: Can this system run Palworld at 4K?

A: Yes, but only on Low or Medium presets. Low averages 75.4 FPS and Medium averages 60.9 FPS. High and Ultra fall below the 60 FPS playability threshold at 45 FPS and 35.8 FPS respectively.

Q: What is the best preset at 1440p for this combination?

A: Ultra is playable at 2560x1440 with an average of 63 FPS. This is the most demanding preset that stays above 60 FPS at this resolution.

Q: How does the i5-9400 compare to CPUs near its performance level?

A: The i5-9400 has an average benchmark score of 2254. The Intel Core i7-1068NG7 scores 2259, which is 0.2% higher. The Intel Core i7-10710U scores 2248, which is 0.3% lower. The AMD Ryzen 5 PRO 1500 scores 2246, which is 0.4% lower, and the Intel Core i3-10305 scores 2264, which is 0.4% higher.

Q: Is the RTX 3070 significantly faster than its nearest rivals?

A: The RTX 3070 has an average benchmark score of 17208. The AMD Radeon RX 7600 XT is 0.7% slower at 17083, the NVIDIA GeForce GTX 690 is 1% slower at 17037, and the AMD Radeon HD 7970M is 1.1% slower at 17019. The NVIDIA Tesla K40c is 1.5% faster at 17468.

Q: What frame rate can I expect at 1080p Ultra?

A: The recorded average is 96.9 FPS. This is 36.9 FPS above the 60 FPS playability threshold and represents the highest preset tested at this resolution.

Q: Does the system meet the 60 FPS threshold at all resolutions?

A: No. At 3840x2160, only Low and Medium meet the threshold. At 2560x1440 and 1920x1080, all four tested presets (Low, Medium, High, Ultra) meet or exceed 60 FPS.

The Verdict

The data confirms that this combination can run Palworld, but the experience depends heavily on the chosen resolution and preset. At 1920x1080, every preset clears the 60 FPS threshold with room to spare. Ultra averages 96.9 FPS, which provides smooth gameplay even in demanding scenes. At 2560x1440, Ultra averages 63 FPS, which is playable but leaves only 3 FPS of headroom. At 3840x2160, the system is limited to Low and Medium, with Medium averaging 60.9 FPS. The verdict by resolution is clear: 1080p and 1440p are fully playable across all presets, while 4K requires dropping to Medium or lower.

The i5-9400's 47th percentile CPU ranking and the RTX 3070's 61st percentile GPU ranking create a system that is stronger on the graphics side. The GPU's 8 GB memory capacity and 448.0 GB/s bandwidth are sufficient for the game's textures at 1440p, but the 4K Ultra preset's 35.8 FPS result indicates a hard limit. Players targeting 4K should stick to Medium for the best balance of visual quality and performance.

Best Settings per Resolution

At 3840x2160, the best preset that stays at or above 60 FPS is Medium, with an average of 60.9 FPS. This is the only high-fidelity option at 4K that remains playable, and it does so by a narrow margin. Low is also playable at 75.4 FPS, but Medium offers better visuals while still meeting the threshold.

At 2560x1440, the best preset is Ultra, with an average of 63 FPS. This delivers the highest visual quality available while maintaining playability. The 63 FPS result is close to the threshold, so players who prefer more headroom could drop to High at 86.9 FPS, but the data shows Ultra is viable.

At 1920x1080, the best preset is Ultra, with an average of 96.9 FPS. This provides the full visual experience with substantial performance headroom. The 37 FPS margin above the threshold means even demanding scenes are unlikely to cause noticeable stuttering.

How This Combo Ranks

The Intel Core i5-9400 and NVIDIA GeForce RTX 3070 combination ranks 1621 out of 3711 tested combos in Palworld. This places it in the upper half of the database, at roughly the 56th percentile. The ranking reflects the system's ability to handle the game at 1080p and 1440p with high settings, while its 4K limitations prevent a higher placement. The mid-pack CPU ranking pulls the overall position down, since the GPU alone would rank higher. Combo results in the database vary widely, and this pairing sits above the median but below the top quartile. The 3711 total combos include systems with both stronger and weaker components, and the 1621 rank indicates a balanced mid-to-upper tier result for this specific game.

Similar Performance Alternatives

The CPU's nearest rivals provide context for systems with similar processing power. The Intel Core i7-1068NG7 (average score 2259, 0.2% faster) and the Intel Core i3-10305 (average score 2264, 0.4% faster) would behave almost identically to the i5-9400 in CPU-bound scenarios. The Intel Core i7-10710U (average score 2248, 0.3% slower) and the AMD Ryzen 5 PRO 1500 (average score 2246, 0.4% slower) are also close matches. Any of these CPUs paired with an RTX 3070 would produce frame rates within a fraction of a percent of the recorded results, since the GPU handles most of the rendering workload in Palworld.

On the GPU side, the AMD Radeon RX 7600 XT (average score 17083, 0.7% slower) is the closest match and would deliver nearly identical FPS. The NVIDIA GeForce GTX 690 (average score 17037, 1% slower) and the AMD Radeon HD 7970M (average score 17019, 1.1% slower) are also within a small margin. The NVIDIA Tesla K40c (average score 17468, 1.5% faster) would provide a slight performance increase, though its workstation orientation may not translate directly to gaming. For practical purposes, any of these GPU alternatives paired with the i5-9400 would keep Palworld within the same performance envelope at each resolution and preset.