Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 19 | 25 | 31 |
| 1440p QHD | 26 | 35 | 45 | 56 |
| 1080p Full HD | 40 | 53 | 68 | 84 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
Palworld, a survival title released on 2024-01-18T17:00:00.000Z, presents a demanding workload for the tested combination of the Intel Core i5-14600K and the Intel Arc B390. The recorded data reveals a system that is heavily constrained by its graphics component, a conclusion supported by the GPU's percentile ranking of 9 among all tested graphics cards. The CPU, by contrast, ranks at the 90th percentile, indicating a substantial mismatch in capability. This analysis will break down the measured frames per second across resolutions and presets, contextualize the overall ranking, and determine where, if anywhere, this configuration delivers a smooth experience.
Measured FPS Breakdown
The database contains measured average frame rates for four quality presets (Low, Medium, High, Ultra) across three resolutions. Minimum and maximum values were only recorded for the Medium preset at each resolution.
At 3840x2160, the results are uniformly poor. The Low preset delivers an average of 31 FPS, which falls far below the 60 FPS playability threshold. Selecting Medium drops the average to 25 FPS, with a minimum of 21 FPS and a maximum of 29 FPS. The High preset manages only 19 FPS on average. The Ultra preset is the least viable option, producing an average of just 15 FPS. None of these settings approach a playable level, and the data indicates that even the least demanding preset cannot maintain a fluid frame rate at 4K.
Moving down to 2560x1440, the situation improves but remains below the target. The Low preset reaches an average of 56 FPS, which is the closest this combination comes to the 60 FPS threshold at this resolution. The Medium preset averages 45 FPS, with recorded minimum and maximum values of 38 and 52 FPS. High settings yield an average of 35 FPS. Ultra again brings up the rear with an average of 26 FPS. The gap between Low and Medium is 11 FPS, while the gap between Medium and High is 10 FPS, showing a fairly consistent performance penalty as quality increases.
At 1920x1080, the configuration finally finds playable territory. The Low preset averages 84 FPS, providing a comfortable margin above the 60 FPS threshold. Medium settings average 68 FPS, with a minimum of 58 FPS and a maximum of 79 FPS. This places the average above the playability line, though the minimum suggests occasional dips below it. The High preset averages 53 FPS, which is below the threshold and not classified as playable. Ultra settings average 40 FPS. The progression from Low to Medium costs 16 FPS, while stepping up to High from Medium costs another 15 FPS, indicating a steep cost for the higher quality tier.
How This Combo Ranks
The combined CPU and GPU configuration ranks 3297 out of 3711 tested combinations for Palworld. This places it in the lower portion of the database, roughly in the 11th percentile of all tested systems for this game. The ranking reflects the significant bottleneck created by the graphics solution.
The GPU's individual standing is the primary driver of this low rank. The Intel Arc B390 sits at the 9th percentile among all GPUs in the database, a position that suggests it is outclassed by the vast majority of tested graphics hardware. Its average benchmark score of 1482 points places it in the company of entry-level graphics solutions. The CPU, meanwhile, holds a 90th percentile ranking, showing that the processor is more than capable of handling the game's logic. The disparity between these two components explains why the system's overall rank in Palworld is so low.
This ranking indicates that the measured performance is not a reflection of the CPU's capabilities but rather a direct consequence of the GPU's limited throughput. In a game like Palworld, the graphics workload dominates, and the Arc B390 cannot keep pace with the demands of higher resolutions and quality settings.
CPU and GPU Roles
The data clearly shows that the Intel Arc B390 is the limiting factor in this configuration. Evidence for this appears when comparing the performance scaling across resolutions. At 1920x1080 with Low settings, the system produces 84 FPS. Dropping to 2560x1440 at Low yields 56 FPS, a reduction of 28 FPS. At 3840x2160 Low, the average falls to 31 FPS. This scaling pattern is consistent with a GPU-bound scenario, where increasing pixel count directly reduces frame output.
The CPU's role is to feed the GPU with draw calls and game state data. Given that the i5-14600K ranks at the 90th percentile and has a Cinebench R23 multi-core score of 24491, it is unlikely to be a limiting factor at any resolution. The processor's high single-thread performance, evidenced by a Geekbench single-core score of 2491, is more than sufficient for Palworld's requirements. The bottleneck remains firmly with the GPU, which has a peak FP32 throughput of 7.680 TFLOPS and only 24 ROPs.
The relationship between presets further confirms this. At 1080p, increasing from Low to Medium reduces the average FPS from 84 to 68. The GPU must render more effects and higher quality textures, and the frame rate responds accordingly. At 1440p, the same preset change drops the average from 56 to 45. The consistent 16 to 11 FPS penalties are the signature of a graphics card working at its limit, with the CPU waiting idle for the next frame to be ready.
Similar Performance Alternatives
The nearest rivals in the database for the Intel Core i5-14600K provide context for its processing power. The Intel Xeon Gold 5318H has an average score of 48698, which is 0.2% lower than the i5-14600K's average benchmark score of 48618. The AMD EPYC 4345P scores 48470, a 0.3% difference. The Intel Core Ultra 5 245HX scores 48287, 0.7% lower, and the Intel Core Ultra 5 245 scores 48995, which is 0.8% higher. All four processors sit within a narrow performance band around the i5-14600K, meaning that swapping to any of these would have a negligible impact on Palworld's frame rates, since the GPU remains the constraint.
The Intel Arc B390's nearest rivals paint a different picture. The NVIDIA GeForce GT 520MX has an average score of 1463, which is 1.3% lower than the Arc B390's 1482. The NVIDIA GeForce 800M scores 1460, a 1.5% difference. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5% lower, and the NVIDIA GeForce GT 710 scores 1443, 2.7% lower. These rival GPUs are all from older, low-end families, and their performance is closely matched to the Arc B390. For Palworld, systems using any of these graphics cards would produce similar frame rates, all falling well short of the 60 FPS target at higher settings.
The proximity of these GPU scores suggests that the Arc B390 behaves like a very low-end graphics solution. Any user with one of these rival cards would see nearly identical performance in Palworld, with the same inability to handle 4K or high preset levels.
Best Settings per Resolution
The playable threshold is defined as 60 FPS average. Using this criterion, the database indicates that the system cannot achieve playable performance at 3840x2160 or 2560x1440 with any of the tested presets. The verdict for both resolutions lists no playable settings.
At 1920x1080, two presets clear the threshold. The Low preset averages 84 FPS, which is well above the target. The Medium preset averages 68 FPS, also above the threshold. The best playable setting is therefore Medium, as it offers the highest visual quality while maintaining an average frame rate above 60 FPS. The High preset, at 53 FPS, and the Ultra preset, at 40 FPS, both fall below the line. The Medium preset's minimum of 58 FPS is slightly under the threshold, but the average of 68 FPS qualifies it as playable under the database's definition.
For users prioritizing frame rate stability, the Low preset at 1080p provides a 16 FPS margin over Medium. However, the Medium preset represents the optimal balance for this configuration, delivering the highest preset that still maintains a playable average.
FAQ
Q: Can this system run Palworld at 60 FPS on a 4K monitor?
A: No. At 3840x2160, the highest average FPS recorded is 31 FPS on Low settings. Medium averages 25 FPS, High averages 19 FPS, and Ultra averages 15 FPS. None of these reach the 60 FPS threshold, and the database lists no playable settings for this resolution.
Q: What is the best preset for 1440p gaming?
A: There is no playable preset at 2560x1440. The Low preset comes closest with an average of 56 FPS, but it still falls 4 FPS short of the 60 FPS target. Medium averages 45 FPS, High averages 35 FPS, and Ultra averages 26 FPS.
Q: What are the recommended settings for 1080p?
A: The Medium preset is the best playable option at 1920x1080, averaging 68 FPS. The Low preset averages 84 FPS and is also playable. High and Ultra presets average 53 FPS and 40 FPS respectively, which are below the playable threshold.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The GPU is the bottleneck. The Intel Arc B390 ranks at the 9th percentile among all GPUs, while the Intel Core i5-14600K ranks at the 90th percentile. The large performance drop when increasing resolution, such as from 84 FPS at 1080p Low to 31 FPS at 4K Low, is characteristic of a GPU-limited system.
Q: How does the Arc B390 compare to its closest rivals?
A: The Arc B390 has an average benchmark score of 1482. Its nearest rivals are the NVIDIA GeForce GT 520MX (1463, 1.3% lower), NVIDIA GeForce 800M (1460, 1.5% lower), NVIDIA GeForce GT 625 OEM (1446, 2.5% lower), and NVIDIA GeForce GT 710 (1443, 2.7% lower). All perform at a similar, low level.
Q: What is the overall rank of this system for Palworld?
A: The combination of the Intel Core i5-14600K and Intel Arc B390 ranks 3297 out of 3711 tested combinations for Palworld. This places it in the lower percentile of systems tested for this game, consistent with the GPU's low performance ranking.
The Verdict
The question of whether this PC can run Palworld depends entirely on the resolution and settings. At 3840x2160, the answer is no. No preset achieves an average frame rate near 60 FPS, with the best result being 31 FPS on Low. The system is not viable for 4K gaming in this title.
At 2560x1440, the answer is also no. The Low preset averages 56 FPS, just under the 60 FPS target, and all other presets fall further behind. The database confirms that no playable settings exist at this resolution.
At 1920x1080, the answer is yes, with caveats. The system can run Palworld at Low and Medium presets, with average frame rates of 84 FPS and 68 FPS respectively. The Medium preset is the best playable option, offering a smooth experience for the majority of gameplay. The High and Ultra presets, however, are not playable, averaging 53 FPS and 40 FPS. The recorded data shows that this configuration is suitable for 1080p gaming at moderate settings, but the Intel Arc B390's low performance ceiling prevents any higher fidelity output.