Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 57 | 78 | 100 | 126 |
| 1440p QHD | 107 | 137 | 181 | 222 |
| 1080p Full HD | 160 | 209 | 272 | 337 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
This analysis examines the Intel Core i5-13400F and NVIDIA GeForce RTX 5080 pairing specifically for Palworld, based on measured frame rate data and synthetic benchmark scores. The dataset provides clear performance tiers across three resolutions, revealing where this combination excels and where it approaches its limits.
Similar Performance Alternatives
The CPU and GPU each sit near specific competitors in benchmark aggregates, which helps contextualize their behavior in Palworld. The Intel Core i5-13400F holds an average benchmark score of 25292, placing it in the 77th percentile among all CPUs. Its nearest rival, the AMD Ryzen 9 6900HS, scores 25284—a delta of 0%—meaning the two processors are statistically indistinguishable in raw compute. The Intel Core 5 120 and AMD Ryzen 5 5600X3D both trail by 0.3% with scores of 25362 and 25365 respectively, while the AMD Ryzen 7 6800H sits 0.4% ahead at 25201. For Palworld, where the CPU must handle base-building logic, creature AI, and world streaming, any of these alternatives would deliver nearly identical frame pacing.
On the GPU side, the RTX 5080 posts an average benchmark score of 56083, ranking in the 87th percentile of all graphics cards. The AMD Radeon 8060S comes closest with 55757 (0.6% slower), followed by the AMD Radeon RX 6750 GRE 12 GB at 55698 (0.7% slower) and the AMD Radeon Pro W5700X at 54828 (2.3% slower). Interestingly, the AMD Radeon RX 9070 GRE leads this group with 57367, putting the RTX 5080 2.2% behind that particular rival. In Palworld's rendering workloads—which include dense foliage, dynamic lighting, and many simultaneous on-screen characters—these GPU alternatives would produce similar frame rates, though the RTX 5080's 16 GB of GDDR7 memory and 960.0 GB/s bandwidth give it headroom for texture-heavy scenes that the 12 GB RX 6750 GRE might not match.
The practical implication is that swapping the i5-13400F for any of its listed rivals would not meaningfully change Palworld's performance, as the CPU scores differ by less than half a percent. Similarly, choosing a Radeon 8060S or RX 6750 GRE instead of the RTX 5080 would yield frame rates within roughly 1% of this combo, assuming other system factors remain constant.
FAQ
Q: Can this system maintain 60 FPS at 3840x2160 with maximum settings?
A: No. At 4K Ultra, the measured average is 56.5 FPS, which falls below the 60 FPS playable threshold. However, dropping to High settings raises the average to 77.8 FPS, comfortably above the threshold.
Q: How does the CPU's single-thread performance compare to its multi-thread score?
A: The i5-13400F scores 3191 in Cinebench R23 single-core and 22604 in multi-core, a ratio of roughly 7:1. Its Geekbench single-core score is 1996 versus 11068 multi-core, showing the 10-core, 16-thread design scales well across Palworld's parallel workloads like creature pathfinding and world simulation.
Q: What is the largest FPS gap between settings at 2560x1440?
A: The gap between Low and Ultra at 1440p is 115.5 FPS (222.3 vs 106.8). The jump from Low to Medium costs 41.8 FPS, while Medium to High costs 43.2 FPS, and High to Ultra costs 30.5 FPS, indicating diminishing returns as settings increase.
Q: Is the RTX 5080's benchmark score significantly higher than its nearest rival?
A: The RTX 5080's 56083 average is only 0.6% higher than the AMD Radeon 8060S at 55757. Against the AMD Radeon RX 9070 GRE at 57367, the RTX 5080 is actually 2.2% slower, so synthetic scores suggest these GPUs are closely matched.
Q: Which resolution shows the smallest performance penalty from Ultra to High settings?
A: At 1920x1080, Ultra runs at 159.7 FPS and High at 208.8 FPS, a difference of 49.1 FPS. At 2560x1440, the same settings differ by 30.5 FPS (106.8 vs 137.3), and at 3840x2160, the difference is 21.3 FPS (56.5 vs 77.8), making the absolute penalty largest at 1080p.
Q: How does this combo rank among all tested configurations for Palworld?
A: It ranks 182nd out of 3711 tested combos, placing it in the top 5% of all CPU-GPU pairings evaluated for this game. That ranking reflects the strong 4K performance and excellent high-refresh-rate capability at lower resolutions.
Best Settings per Resolution
At 1920x1080, the Ultra preset delivers an average of 159.7 FPS, which is the most demanding setting that stays above 60 FPS. The system has enormous headroom here, as even Ultra runs at more than 2.6 times the playable threshold.
At 2560x1440, Ultra remains the best choice with an average of 106.8 FPS. This is the highest preset available, and it still clears the 60 FPS threshold by a significant margin, leaving room for demanding scenes or future content updates.
At 3840x2160, the situation changes. Ultra drops to 56.5 FPS, below the 60 FPS threshold, so High becomes the recommended preset with an average of 77.8 FPS. Medium runs at 99.9 FPS and Low at 125.8 FPS, but High offers the best balance of visual fidelity and performance at this resolution.
The Verdict
The Intel Core i5-13400F paired with the RTX 5080 can run Palworld at 60 FPS or above across all three tested resolutions, provided the right settings are chosen. At 1920x1080, Ultra settings are fully playable at 159.7 FPS average, and at 2560x1440, Ultra achieves 106.8 FPS. The only limitation appears at 3840x2160, where Ultra falls short at 56.5 FPS, but High settings restore playability at 77.8 FPS.
The verdict data lists High, Low, and Medium as playable at 4K, with Ultra excluded. At 1440p and 1080p, all four presets including Ultra are playable. For users prioritizing maximum visual quality, the system delivers 4K High as its ceiling, while competitive or high-refresh-rate play at 1440p Ultra is well within reach.
Measured FPS Breakdown
3840x2160 (4K):
- Low: 125.8 FPS average
- Medium: 99.9 FPS average
- High: 77.8 FPS average
- Ultra: 56.5 FPS average
The progression from Low to Ultra at 4K shows a steady decline of roughly 25 FPS per tier, with the final step from High to Ultra costing 21.3 FPS. This suggests the Ultra preset introduces effects that disproportionately impact the GPU at this resolution, likely related to shadow quality or draw distance.
2560x1440 (1440p):
- Low: 222.3 FPS average
- Medium: 180.5 FPS average
- High: 137.3 FPS average
- Ultra: 106.8 FPS average
At 1440p, the system shows strong scaling. The gap between Low and Ultra is 115.5 FPS, but even the lowest preset exceeds 220 FPS, indicating the CPU and GPU combination is not bottlenecked at this resolution until very high settings are applied.
1920x1080 (1080p):
- Low: 336.5 FPS average
- Medium: 271.5 FPS average
- High: 208.8 FPS average
- Ultra: 159.7 FPS average
At 1080p, the RTX 5080 is clearly the dominant factor, with Low settings exceeding 336 FPS. The CPU's 10 cores and 16 threads handle Palworld's simulation overhead without becoming a limiting factor, as evidenced by the smooth scaling across all presets.
How This Combo Ranks
This specific CPU-GPU combination ranks 182nd out of 3711 tested combos for Palworld, placing it in the 95th percentile of all configurations evaluated. That ranking is notably high given that the RTX 5080 is a recent flagship-class GPU, and the i5-13400F is a mid-range processor. The data suggests that Palworld is more GPU-bound than CPU-bound at higher resolutions, which explains why this pairing performs so well despite the CPU's 77th percentile ranking among all processors.
The rank becomes more meaningful when considering the GPU's 87th percentile standing. The combination outperforms what either component's percentile alone would suggest, indicating good synergy for this particular game. At 4K Ultra, the 56.5 FPS result is the only sub-60 outcome in the entire dataset, which is a minor blemish on an otherwise strong showing.
CPU and GPU Roles
The measured FPS scaling across resolutions reveals how the workload shifts between the i5-13400F and RTX 5080. At 1080p, the average FPS ranges from 159.7 at Ultra to 336.5 at Low, a span of 176.8 FPS. At 1440p, the range narrows to 115.5 FPS (106.8 to 222.3), and at 4K it narrows further to 69.3 FPS (56.5 to 125.8). This compression at higher resolutions is the classic signature of a GPU-bound system—as pixel count rises, the graphics card becomes the limiting factor, and settings changes have less absolute impact.
The CPU's role is most visible at 1080p Low, where 336.5 FPS suggests the i5-13400F can feed frames faster than most displays can show them. At 4K, however, the CPU is largely idle relative to the GPU's workload, which is why the RTX 5080's 56.5 FPS at Ultra represents its raw rendering ceiling for this game. The scaling from 1440p to 4K at Ultra shows a 50.3 FPS drop (106.8 to 56.5), which exceeds the 38.1 FPS drop from 1080p to 1440p at the same settings (159.7 to 106.8). This increasing penalty per resolution step confirms that Palworld's Ultra preset is heavily pixel-bound, making the GPU the dominant component at 4K.
Conversely, at Low settings, the resolution scaling is more moderate: 336.5 FPS at 1080p drops to 222.3 FPS at 1440p (−114.2) and then to 125.8 FPS at 4K (−96.5). The relatively smaller penalty from 1440p to 4K at Low settings suggests the CPU begins to matter more when the GPU is not fully stressed, as the i5-13400F's frame generation capacity becomes a secondary factor. This pattern indicates that Palworld's performance is primarily GPU-limited at High and Ultra presets, while Low and Medium presets allow the CPU's 16 threads to contribute more meaningfully to overall throughput.