Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 72 | 94 | 116 |
| 1440p QHD | 99 | 130 | 169 | 209 |
| 1080p Full HD | 150 | 198 | 257 | 318 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 4080 delivers a decisive performance class in Palworld, clearing the 60 FPS threshold at 4K High settings and soaring to 150 FPS at 1080p Ultra. Benchmark data shows this combination ranks 247th out of 3711 tested configurations, placing it in the top tier for this survival title. The CPU’s 77th percentile standing among all processors and the GPU’s 86th percentile ranking among all graphics cards underscore a balanced pairing where neither component bottlenecks the other in typical gameplay scenarios. At 4K Ultra, however, the average frame rate dips to 55 FPS, revealing the first meaningful limitation of this setup.
Measured FPS Breakdown
The measured frame rates for this combo span three resolutions and four quality presets, with average FPS figures forming the core dataset. At 1920x1080, the lowest resolution tested, performance is exceptionally high across all settings. Low preset averages 318 FPS, Medium averages 257 FPS with a minimum of 219 and maximum of 296, High averages 198 FPS, and Ultra still maintains 150 FPS. These numbers indicate that at 1080p, the RTX 4080 is never the limiting factor; even the most demanding preset keeps frame rates far above any practical display refresh rate.
Moving to 2560x1440, the pattern remains strong but scales down predictably. Low preset averages 209 FPS, Medium averages 169 FPS with a minimum of 144 and maximum of 195, High averages 130 FPS, and Ultra averages 99 FPS. The gap between Low and Ultra at this resolution is 110 FPS, demonstrating that Palworld’s graphics settings substantially influence GPU load. The Medium preset’s minimum of 144 FPS is notable because it aligns exactly with common 144 Hz monitors, meaning this combo can hold that refresh rate even during dips in dense scenes.
At 3840x2160, 4K resolution introduces the first sub-60 result. Low preset averages 116 FPS, Medium averages 94 FPS with a minimum of 80 and maximum of 108, High averages 72 FPS, and Ultra drops to 55 FPS. The jump from Medium to High costs 22 FPS on average, while the jump from High to Ultra costs 17 FPS. The Medium preset’s minimum of 80 FPS provides a comfortable buffer above the 60 FPS playability threshold, but Ultra’s 55 FPS average falls short, indicating that 4K Ultra requires either a settings reduction or a more powerful GPU for sustained 60 FPS gameplay.
Across all resolutions, the Low preset consistently delivers the highest frame rates, with 318 FPS at 1080p, 209 FPS at 1440p, and 116 FPS at 4K. The Medium preset offers the best balance of visual quality and performance, with minimums of 219, 144, and 80 FPS at 1080p, 1440p, and 4K respectively. High preset remains playable at every resolution, including 4K where it averages 72 FPS. Ultra is only viable at 1080p and 1440p, with 150 and 99 FPS averages respectively.
FAQ
Q: Can this PC run Palworld at 60 FPS on a 4K monitor?
A: Yes, at 4K with High settings it averages 72 FPS, and with Medium settings it averages 94 FPS with a minimum of 80 FPS. Ultra settings fall below the threshold at 55 FPS average.
Q: What is the highest settings preset that stays above 60 FPS at 1440p?
A: Ultra settings at 2560x1440 average 99 FPS, which is well above the 60 FPS playability threshold. This is the most demanding preset available, and it runs comfortably.
Q: How does this combo compare to other tested configurations in Palworld?
A: It ranks 247th out of 3711 tested combos, placing it in the top 7% of all configurations. The CPU’s nearest rival, the AMD Ryzen 9 6900HS, scores within 0% of the i5-13400F’s average benchmark, while the GPU’s nearest rival, the RTX 4080 SUPER, is only 0.1% faster.
Q: Is the CPU or GPU more likely to limit performance in Palworld?
A: The GPU is the primary limiter at 4K Ultra, where the average drops to 55 FPS. At 1080p and 1440p, the high frame rates suggest the CPU keeps up adequately, but the RTX 4080’s 86th percentile ranking versus the CPU’s 77th percentile indicates the GPU is the stronger component.
Q: What frame rate can I expect at 1080p with Medium settings?
A: The average is 257 FPS, with a minimum of 219 FPS and a maximum of 296 FPS. This provides massive headroom for high refresh rate displays.
Q: Does the RTX 4080’s performance in Palworld match its overall benchmark standing?
A: The GPU’s average benchmark score of 54247 places it at the 86th percentile of all GPUs, and its nearest rival, the RTX 4080 SUPER, scores 54209. In Palworld, the measured FPS at 1440p Ultra (99 FPS) and 4K High (72 FPS) reflects this high-tier positioning.
Similar Performance Alternatives
Looking at the CPU’s nearest rivals, the AMD Ryzen 9 6900HS has an average score of 25284, which is effectively identical to the i5-13400F’s 25292 average (0% delta). This means a system with that mobile-class processor would behave nearly identically in CPU-bound scenarios within Palworld. The Intel Core 5 120 and AMD Ryzen 5 5600X3D both score slightly higher at 25362 and 25365 respectively, each with a -0.3% delta, representing a negligible performance difference. The AMD Ryzen 7 6800H scores 25201 with a 0.4% delta, again a marginal gap. For practical purposes, any of these CPUs paired with the same RTX 4080 would produce frame rates within a few percent of the measured results.
On the GPU side, the RTX 4080 SUPER is the closest competitor with an average score of 54209 versus the RTX 4080’s 54247, a 0.1% delta in favor of the 4080. A system with a 4080 SUPER would deliver essentially identical Palworld performance. The AMD Radeon Pro W5700X scores 54828 (-1.1% delta), the AMD Radeon RX 6750 GRE 12 GB scores 55698 (-2.6% delta), and the AMD Radeon 8060S scores 55757 (-2.7% delta). These GPUs are all within 3% of the RTX 4080’s average benchmark score, meaning users with those cards would see similar FPS ranges in Palworld, with the largest deviation being roughly 3% lower performance in the case of the Radeon 8060S.
For a full system swap, combining the i5-13400F with a GPU like the RTX 4080 SUPER would yield frame rates nearly identical to the measured data, since both the CPU and GPU deltas are within 0.3% of their respective rivals. A pairing with the AMD Ryzen 5 5600X3D and RTX 4080 would also be statistically indistinguishable in Palworld, given the CPU delta of -0.3% and the fact that the game’s measured FPS at higher resolutions is more GPU-dependent.
The Verdict
This PC can absolutely run Palworld, and it does so with substantial headroom at most settings. The verdict by resolution is clear: at 1920x1080, all four presets (Low, Medium, High, Ultra) clear 60 FPS, with Ultra averaging 150 FPS. At 2560x1440, all four presets also clear 60 FPS, with Ultra averaging 99 FPS. At 3840x2160, three of four presets clear 60 FPS — Low (116 FPS), Medium (94 FPS), and High (72 FPS) — but Ultra falls short at 55 FPS average.
The 60 FPS playability threshold is comfortably exceeded in every scenario except 4K Ultra. For gamers prioritizing visual fidelity at 4K, the High preset delivers 72 FPS, which is 20% above the threshold. For those with 1440p displays, Ultra at 99 FPS is the recommended target, providing both maximum quality and smooth gameplay. At 1080p, the Ultra preset’s 150 FPS average makes this combo suitable for 144 Hz or even 165 Hz monitors, though the Medium preset’s 257 FPS average would be required for 240 Hz displays.
The data indicates that this CPU-GPU pairing is well-matched for Palworld, with no severe bottleneck at any tested resolution. The only sub-60 result, 4K Ultra at 55 FPS, represents the extreme end of the graphics spectrum and can be remedied by dropping to High settings, which costs only 17 FPS on average but still maintains fluid motion. This is a high-performance configuration that handles Palworld’s survival gameplay with ease across nearly all settings.
Best Settings per Resolution
At 3840x2160 (4K), the most demanding preset that stays at or above 60 FPS is High, which averages 72 FPS. Medium is also viable at 94 FPS average with an 80 FPS minimum, but High provides better visual quality while still maintaining a 12 FPS buffer above the threshold. Ultra is not recommended at this resolution due to its 55 FPS average.
At 2560x1440, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 99 FPS. This is the highest quality setting available in the benchmark data, and it clears the threshold by 39 FPS, making it the clear choice for 1440p users. The High preset at 130 FPS and Medium at 169 FPS are also excellent options for higher refresh rate displays.
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 150 FPS. This provides a 90 FPS margin above the threshold, ensuring smooth gameplay even in demanding scenes. For users with 240 Hz monitors, the Medium preset at 257 FPS average would be the better choice, but Ultra remains the highest quality option that exceeds 60 FPS.
The progression of best settings across resolutions shows a clear pattern: 4K requires High (72 FPS), 1440p allows Ultra (99 FPS), and 1080p also allows Ultra (150 FPS). This means users only need to compromise on settings when pushing 4K resolution, and even then, the compromise is minimal — High instead of Ultra — with a playable frame rate.
How This Combo Ranks
In the database of tested Palworld configurations, this Intel Core i5-13400F + NVIDIA GeForce RTX 4080 combo ranks 247th out of 3711 total combinations. This places it in the top 6.7% of all tested systems, a strong position that reflects the GPU’s high-end status and the CPU’s capable mid-range performance. The rank is driven primarily by the RTX 4080’s 86th percentile standing among all GPUs, which allows the system to excel at high resolutions where the GPU is the dominant factor.
The CPU’s 77th percentile ranking among all processors is respectable but not elite, and it becomes more relevant at lower resolutions where frame rates exceed 200 FPS. At 1080p Low, the i5-13400F must feed 318 FPS to the GPU, which is a demanding workload for any processor. Even so, the measured FPS indicates the CPU keeps up, as there are no anomalies suggesting a bottleneck. The 3DMark multi-threaded score of 7314 and Cinebench R23 multi-core score of 22604 confirm the CPU’s strong multi-threaded capabilities, which are relevant for Palworld’s survival mechanics that involve base building and creature AI.
Compared to the 3711 other combos in the database, this system’s rank of 247 means it outperforms approximately 93% of tested configurations. The nearest rivals on the GPU side, such as the RTX 4080 SUPER, would produce nearly identical rankings due to their 0.1% performance delta. The CPU’s rivals, including the Ryzen 9 6900HS and Ryzen 5 5600X3D, would not meaningfully change the rank when paired with the same GPU. Overall, this combo is a top-tier choice for Palworld, with the only limitation being 4K Ultra settings, which fall just below the 60 FPS threshold.