Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 72 | 94 | 116 |
| 1440p QHD | 99 | 130 | 169 | 209 |
| 1080p Full HD | 150 | 198 | 222 | 240 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
How This Combo Ranks
The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 4080 lands at rank 420 out of 3711 tested combos in Palworld, placing it in the top 11.3% of all configurations recorded in the database. This is a strong position, though it reflects an interesting asymmetry: the CPU sits at the 68th percentile among all processors, while the GPU reaches the 86th percentile among all graphics cards. The pairing of a mid-range 10th Gen Intel processor with a flagship Ada Lovelace GPU creates a combination that ranks high overall, but the data suggests the CPU is the limiting factor in several scenarios.
The CPU's average benchmark score of 14185 places it nearly exactly between the Intel Xeon 6756E (14163, 0.2% behind) and the Intel Core 7 160UL (14232, 0.3% ahead). This clustering means the i5-10400F delivers compute performance essentially indistinguishable from those server and mobile parts. On the GPU side, the RTX 4080's average score of 54247 sits just 0.1% above the RTX 4080 SUPER (54209), which is a narrower margin than the 1.1% gap to the AMD Radeon Pro W5700X (54828). The RTX 4080 also trails the AMD Radeon RX 6750 GRE 12 GB by 2.6% and the AMD Radeon 8060S by 2.7% in aggregate GPU benchmarks, though those synthetic scores do not directly translate to Palworld's specific rendering workload.
What makes this combo interesting is not just its absolute rank, but how the component balance shifts across resolutions. At 1080p the CPU has to work harder to feed the GPU, while at 4K the GPU becomes the dominant constraint. The measured frame rates confirm this pattern, with the gap between Low and Ultra settings narrowing as resolution increases.
CPU and GPU Roles
The recorded data reveals a clear division of labor between the Intel Core i5-10400F and the RTX 4080 depending on resolution. At 1920x1080, the CPU's six cores and twelve threads become the bottleneck. The jump from Low to Ultra settings at 1080p costs 90 FPS (240 down to 150), but even at Ultra the combo maintains 150 FPS, suggesting the GPU is never fully saturated at this resolution. The i5-10400F's single-thread score of 688 in 3DMark and 1451 in Cinebench R23 indicates modest per-core performance that can limit frame generation in less GPU-bound scenes.
Moving to 2560x1440, the balance shifts. The RTX 4080's 16 GB of GDDR6X memory and 716.8 GB/s bandwidth become more relevant, yet the CPU still keeps pace. Ultra settings at 1440p deliver 99 FPS, which is 51 FPS lower than at 1080p, showing the expected resolution scaling. The Medium preset shows a narrower spread: 222 FPS at 1080p versus 169 FPS at 1440p, a 24% reduction that points to the GPU handling more of the load.
At 3840x2160, the GPU dominates completely. Ultra settings drop to 55 FPS, below the 60 FPS playability threshold, while High settings recover to 72 FPS. The difference between Low and High at 4K is 44 FPS (116 to 72), which is proportionally smaller than the 90 FPS difference at 1080p between the same settings. This compression of the settings range at 4K is a classic sign of GPU saturation: when the RTX 4080 is fully utilized, preset choices matter less than raw fill rate and shading throughput. The card's 48.74 TFLOPS of FP32 performance and 280.6 GPixel/s pixel rate are the relevant figures here, and they are being pushed to their limits at 4K Ultra.
The i5-10400F's 42.7 GB/s memory bandwidth and DDR4 support could theoretically starve the RTX 4080 in CPU-bound scenes, but the frame rates across all resolutions indicate this is rarely a problem in Palworld. The game appears to scale well with GPU resources, which favors this combination.
Best Settings per Resolution
At 3840x2160, the most demanding preset that stays at or above 60 FPS is High, with an average of 72 FPS. Medium runs at 94 FPS and Low at 116 FPS, but High offers the best visual quality while remaining comfortably playable. Ultra at 4K falls to 55 FPS, which misses the 60 FPS threshold.
At 2560x1440, Ultra is the best playable setting at 99 FPS. This is a significant margin above the 60 FPS floor, leaving headroom for demanding scenes. High runs at 130 FPS, Medium at 169 FPS, and Low at 209 FPS, but Ultra provides the full visual experience without sacrificing playability.
At 1920x1080, Ultra delivers 150 FPS, which is more than double the playability threshold. High reaches 198 FPS, Medium 222 FPS, and Low 240 FPS. The 1080p Ultra figure of 150 FPS is particularly notable because it shows the combo can max out the game at the most common resolution while still delivering high refresh rate performance.
FAQ
Q: Can this PC run Palworld at 4K?
A: Yes, at High settings with 72 FPS average, and also at Medium (94 FPS) and Low (116 FPS). Ultra settings at 4K drop to 55 FPS, which is below the 60 FPS playability threshold.
Q: Why does the RTX 4080 struggle at 4K Ultra in Palworld?
A: The GPU's 48.74 TFLOPS FP32 performance and 280.6 GPixel/s pixel rate are being fully utilized at 3840x2160 Ultra. The 55 FPS result indicates the card has hit its rendering ceiling for this game at that preset.
Q: Is the Intel Core i5-10400F holding back the RTX 4080?
A: The data shows some CPU limitation at 1080p, where the gap between Low and Ultra is 90 FPS (240 to 150). At higher resolutions the GPU becomes the primary constraint. The CPU's 68th percentile ranking and single-thread score of 688 in 3DMark suggest it can feed the GPU adequately in most Palworld scenarios.
Q: What is the best settings preset for 1440p gaming?
A: Ultra at 2560x1440 runs at 99 FPS, which is the highest visual quality that remains above 60 FPS. This makes 1440p the sweet spot for this combo, offering near-4K visuals with a 39 FPS margin above the playability threshold.
Q: How much performance does the RTX 4080 lose compared to the RTX 4080 SUPER?
A: The RTX 4080's average benchmark score is 54247, which is 0.1% lower than the RTX 4080 SUPER's 54209. This difference is negligible in practice, meaning the two cards would perform nearly identically in Palworld.
Q: Does Palworld favor the CPU or GPU in this configuration?
A: Palworld is heavily GPU-bound with this pairing. Evidence includes the 4K Ultra result dropping to 55 FPS while 1080p Ultra stays at 150 FPS, and the CPU's performance being sufficient to maintain 116 FPS even at 4K Low settings.
Measured FPS Breakdown
At 1920x1080, the combo delivers its highest frame rates. Low settings average 240 FPS, Medium averages 222 FPS with a range of 189 to 256 FPS, High averages 198 FPS, and Ultra averages 150 FPS. The Medium preset shows the widest recorded spread, with the minimum of 189 FPS still far above the playability threshold.
At 2560x1440, performance remains strong across all presets. Low averages 209 FPS, Medium averages 169 FPS with a range of 144 to 195 FPS, High averages 130 FPS, and Ultra averages 99 FPS. The Medium range at 1440p (144 to 195 FPS) mirrors the 1080p pattern but at proportionally lower values.
At 3840x2160, the scaling becomes steep. Low averages 116 FPS, Medium averages 94 FPS with a range of 80 to 108 FPS, High averages 72 FPS, and Ultra averages 55 FPS. The Medium preset at 4K shows the smallest minimum value among all playable presets, at 80 FPS, which still clears the 60 FPS threshold with a 20 FPS buffer.
The complete dataset shows a consistent pattern: each resolution step down from 1080p to 1440p to 4K costs roughly 40 to 50 percent of the frame rate at equivalent settings. The exception is Ultra, where the 4K result of 55 FPS represents a 44% drop from the 1440p Ultra figure of 99 FPS, and a 63% drop from 1080p Ultra at 150 FPS.
The Verdict
This PC can run Palworld, and it can run it well at most resolutions and settings. The verdict data confirms playable settings at all three tested resolutions, with the only exception being 4K Ultra. At 3840x2160, the playable settings are High (72 FPS), Medium (94 FPS), and Low (116 FPS), with High being the best choice for visual fidelity. At 2560x1440, all four presets are playable, with Ultra at 99 FPS being the optimal configuration. At 1920x1080, all four presets are playable, with Ultra at 150 FPS.
The clear verdict is that 1440p is the sweet spot for this combination. It delivers 99 FPS at Ultra settings, which is 39 FPS above the playability threshold and offers a substantial visual upgrade over 1080p. The 4K Ultra result of 55 FPS is the only configuration that fails to meet the 60 FPS standard, and even that is only 5 FPS short, suggesting that minor settings adjustments or a small resolution scale could close the gap.
For users with 4K displays, High settings at 72 FPS is the recommended path. For 1440p users, Ultra is clearly viable. For 1080p users, the combo is overkill, with even Ultra settings delivering 150 FPS, which is more than enough for high refresh rate monitors.
Similar Performance Alternatives
The nearest rivals for the Intel Core i5-10400F are the Intel Xeon 6756E (within 0.2%), the Intel Core 7 160UL (within 0.3%), the AMD EPYC 7552 (within 0.5%), and the AMD Ryzen 3 7320C (within 0.6%). These CPUs all deliver average benchmark scores within a fraction of a percent of the i5-10400F, meaning any of them paired with the RTX 4080 would produce nearly identical Palworld frame rates. The EPYC 7552 and Xeon 6756E are server parts, while the Core 7 160UL and Ryzen 3 7320C are lower-power designs, but the aggregate scores indicate comparable compute performance for gaming workloads.
On the GPU side, the RTX 4080 SUPER is the closest rival at 54209 average score, just 0.1% behind the RTX 4080's 54247. This makes the SUPER version effectively a direct substitute with virtually identical Palworld performance. The AMD Radeon Pro W5700X scores 54828, which is 1.1% higher than the RTX 4080, while the AMD Radeon RX 6750 GRE 12 GB (55698) and AMD Radeon 8060S (55757) sit 2.6% and 2.7% higher respectively. These AMD alternatives would likely deliver slightly different frame rates in Palworld, but the deltas are small enough that the overall playability verdict would remain unchanged.
Users considering a similar build should note that the CPU rivals with scores within 0.6% would not meaningfully alter the measured FPS results. The GPU alternatives within 2.7% would also produce very similar outcomes, reinforcing that this combination's rank of 420 out of 3711 is robust to minor component substitutions.