Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

57%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
237 FPS
Ultra 1080p Measured
113 FPS

1440p (2K / QHD)

Low 1440p Measured
160 FPS
Ultra 1440p Measured
72 FPS

4K (Ultra HD)

Low 4K Measured
89 FPS
Ultra 4K Measured
39 FPS
6.7ms Frame Time
10ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 14,185
Graphics Card
Required 27,862
Your GPU 23,172

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 55 71 89
1440p QHD 72 99 126 160
1080p Full HD 113 149 192 237

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 149
1920x1080 Low 237
1920x1080 Medium 192
1920x1080 Ultra 113
2560x1440 High 99
2560x1440 Low 160
2560x1440 Medium 126
2560x1440 Ultra 72
3840x2160 High 55
3840x2160 Low 89
3840x2160 Medium 71
3840x2160 Ultra 39

Performance Analysis: Palworld on Your System

Measured FPS Breakdown

The recorded data for Palworld with the Intel Core i5-10400F and NVIDIA GeForce RTX 3080 shows a wide performance spread depending on resolution and quality preset. At 1920x1080, the combo delivers high frame rates across all settings. The Low preset reaches an average of 236.9 FPS, while Medium drops to 192.1 FPS, High to 149 FPS, and Ultra still holds a strong 112.6 FPS. These numbers indicate that at 1080p, the system is rarely constrained, with even the most demanding preset staying well above the 60 FPS playability threshold.

Moving to 2560x1440, the frame rates remain impressive but show a clearer scaling curve. Low averages 160.1 FPS, Medium 126.2 FPS, High 99.1 FPS, and Ultra 71.9 FPS. The drop from Low to Ultra is roughly 55%, which reflects the increased GPU load at higher resolutions. Still, every preset at 1440p clears the 60 FPS mark, making this resolution fully playable with headroom.

At 3840x2160, the picture changes. Ultra averages only 38.7 FPS, which falls well below the playability threshold. High improves to 54.6 FPS, still under 60. Medium reaches 71.3 FPS, and Low jumps to 89.1 FPS. The data shows a steep penalty for Ultra at 4K, with the gap between Medium and Ultra being nearly 33 FPS. For 4K users, the choice of preset becomes critical, as only Low and Medium provide smooth gameplay.

The measurements do not include min or max FPS values, so the analysis relies on average frame rates. Across all tested configurations, the pattern is consistent: higher resolutions and higher presets reduce performance, but the combo remains capable up to 1440p Ultra and 4K Medium.

FAQ

Q: Can this PC run Palworld at 60 FPS or higher at 1920x1080?

A: Yes. Every recorded preset at 1080p exceeds 60 FPS. The lowest average is 112.6 FPS on Ultra, while Low reaches 236.9 FPS.

Q: What is the best 4K setting for a smooth experience?

A: Medium is the most demanding preset that stays above 60 FPS at 3840x2160, averaging 71.3 FPS. Low is also playable at 89.1 FPS, but High and Ultra fall short at 54.6 FPS and 38.7 FPS respectively.

Q: How does the RTX 3080 compare to its nearest rivals in the database?

A: The RTX 3080 has an average benchmark score of 23172. Its closest rival, the NVIDIA P106-100, scores 23249, which is 0.3% higher. The AMD Radeon Pro Vega 16 and AMD Radeon RX 6600M both score 23250 and 23273, also 0.3% and 0.4% ahead. The AMD Radeon R9 M290X trails by 0.4% with a score of 23276.

Q: Is the i5-10400F a bottleneck for the RTX 3080 in Palworld?

A: The CPU ranks in the 68th percentile among all processors, with an average benchmark score of 14185. Its nearest rival, the Intel Core 7 160UL, scores 14232, a 0.3% difference. The data does not indicate a severe CPU limitation, as the combo achieves high frame rates at lower resolutions where CPU load is higher.

Q: What is the combo's overall rank among tested systems?

A: The i5-10400F and RTX 3080 combination ranks 1055 out of 3711 tested combos in Palworld, placing it in the upper third of all systems.

Q: Does raising the preset from Low to Ultra at 1440p keep playability?

A: Yes. At 2560x1440, Low averages 160.1 FPS, Medium 126.2 FPS, High 99.1 FPS, and Ultra 71.9 FPS. All presets remain above the 60 FPS threshold, so users can choose Ultra without sacrificing smoothness.

How This Combo Ranks

In the database's measured results for Palworld, the Intel Core i5-10400F paired with the NVIDIA GeForce RTX 3080 lands at position 1055 out of 3711 tested combinations. That places this system in the top 28% of all recorded configurations. The rank reflects a balanced pairing: the CPU sits at the 68th percentile among all processors, and the GPU matches that same percentile among all graphics cards. Neither component is an outlier, which suggests the combo delivers consistent, predictable performance.

The CPU's nearest rivals in the benchmark database include the Intel Xeon 6756E, which scores 14163, a 0.2% difference from the i5-10400F's 14185. The AMD EPYC 7552 scores 14115, 0.5% lower, while the Intel Core 7 160UL scores 14232, 0.3% higher, and the AMD Ryzen 3 7320C scores 14277, 0.6% higher. These small deltas indicate that the i5-10400F performs in line with a broad range of server and mobile chips, despite being a desktop part.

On the GPU side, the RTX 3080's average benchmark score of 23172 is nearly matched by its nearest rivals. The NVIDIA P106-100 scores 23249, the AMD Radeon Pro Vega 16 scores 23250, and the AMD Radeon RX 6600M scores 23273, all within 0.4% of the RTX 3080. The AMD Radeon R9 M290X also sits close at 23276. This clustering shows that the RTX 3080's raw compute performance is competitive with a diverse set of cards, from professional workstation parts to mainstream laptops.

The combo rank of 1055 out of 3711 is above the median, and the measured FPS data supports that standing. At 1080p and 1440p, the system consistently delivers frame rates that exceed what most users need, while at 4K it remains playable on Medium or Low. The ranking does not place this combo at the very top, but the performance margins are sufficient for demanding survival games like Palworld.

The Verdict

The recorded data answers the question directly: yes, this PC can run Palworld, but the experience depends heavily on resolution and settings. At 1920x1080, every preset clears the 60 FPS threshold with room to spare. The Ultra preset averages 112.6 FPS, which is nearly double the playability cutoff, and even the lowest frame rate recorded among all 1080p settings, High at 149 FPS, is far above the standard. Users with 1080p displays can max out the game without concern.

At 2560x1440, the verdict is equally positive. All four presets, Low, Medium, High, and Ultra, stay above 60 FPS. Ultra averages 71.9 FPS, which is playable but leaves less headroom than lower presets. High at 99.1 FPS and Medium at 126.2 FPS offer smoother experiences for those who prioritize frame rate over visual fidelity. The data shows that 1440p Ultra is viable, but users sensitive to frame drops may prefer High.

At 3840x2160, the verdict becomes conditional. The database lists Low and Medium as playable, with Medium being the best setting that holds an average of 71.3 FPS. High falls to 54.6 FPS, just under the threshold, and Ultra drops to 38.7 FPS, which is not suitable for smooth gameplay. For 4K owners, the choice is clear: stick to Medium or Low. The gap between Medium and High is roughly 17 FPS, a significant penalty for one step up in quality.

In summary, the i5-10400F and RTX 3080 combination delivers a fully playable experience at 1080p and 1440p across all presets, and at 4K with Medium settings. The system hits the 60 FPS target in twelve out of twelve recorded configurations, with the only sub-60 results occurring at 4K High and Ultra.

CPU and GPU Roles

The measured FPS data reveals how the CPU and GPU split responsibilities in Palworld across different resolutions. At 1920x1080, the frame rates are high enough that the GPU is likely the primary limiter, but the CPU still has to feed the graphics card. The jump from Low to Ultra at 1080p is from 236.9 FPS down to 112.6 FPS, a reduction of over half. This scaling suggests that the GPU load increases substantially with preset quality, while the CPU maintains enough throughput to avoid becoming a bottleneck at these frame rates.

At 2560x1440, the pattern continues but with a steeper decline. Low averages 160.1 FPS, while Ultra drops to 71.9 FPS. The relative reduction from Low to Ultra is about 55%, similar to 1080p's 52% drop. The absolute numbers are lower at 1440p, which indicates that the GPU is doing more work per frame. The CPU's role becomes less critical as resolution rises, because the frame rate decreases, giving the processor more time to prepare each frame.

At 3840x2160, the GPU dominates the performance picture. Ultra averages 38.7 FPS, which is below the 60 FPS threshold, while Medium reaches 71.3 FPS. The difference between Low and Ultra at 4K is 50.4 FPS, a larger absolute gap than at lower resolutions. This points to the RTX 3080 being the limiting factor at 4K, especially on High and Ultra, where the pixel count and shading workload overwhelm the GPU. The CPU, with its 6 cores and 12 threads, appears sufficient to keep up with the GPU's demands, as the frame rates scale predictably with preset changes.

The data also shows that the CPU's benchmark scores, such as the Cinebench R23 multi-core result of 10283 and single-core of 1451, are modest compared to the GPU's Passmark G3D score of 25086. However, in Palworld, the measured FPS at 1080p Low is 236.9, which is far above the CPU's single-threaded performance would suggest. This indicates that the game is not heavily CPU-bound at lower resolutions, or that the i5-10400F's 12 threads are enough to handle the workload. The GPU roles become more pronounced at 4K, where the RTX 3080's raw throughput, 29.77 TFLOPS FP32, determines the outcome.

Best Settings per Resolution

For each resolution, the database identifies the most demanding preset that still maintains an average of at least 60 FPS. At 1920x1080, that preset is Ultra, with an average of 112.6 FPS. This gives users the highest visual quality while keeping frame rates nearly double the playability threshold. There is no need to compromise at 1080p, as even the most demanding setting leaves substantial headroom.

At 2560x1440, the best preset is also Ultra, averaging 71.9 FPS. This is above 60 FPS, but the margin is thinner than at 1080p. Users who prioritize consistent frame rates might consider High, which averages 99.1 FPS, but the data confirms that Ultra is playable at 1440p. The choice depends on whether the user prefers maximum detail or a larger safety margin.

At 3840x2160, the best preset is Medium, with an average of 71.3 FPS. Low is also playable at 89.1 FPS, but Medium offers better visuals while staying above the threshold. High and Ultra are not recommended for 4K, as they average 54.6 FPS and 38.7 FPS respectively, both below 60. The recommendation is to use Medium at 4K, which balances image quality and performance.

These recommendations come directly from the recorded data. For 1080p and 1440p, the system can handle maximum settings, while 4K requires a step down to Medium. The RTX 3080's 10 GB of GDDR6X memory and 320-bit bus are sufficient for Medium at 4K, but the Ultra preset's additional shading and texture demands exceed what the GPU can deliver at that resolution. The i5-10400F, with its 12 MB of L3 cache and dual-channel DDR4 support, does not appear to limit these results, as the frame rates scale consistently with GPU load.