Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
160 FPS
Ultra 1080p Measured
76 FPS

1440p (2K / QHD)

Low 1440p Measured
105 FPS
Ultra 1440p Measured
50 FPS

4K (Ultra HD)

Low 4K Measured
58 FPS
Ultra 4K Measured
28 FPS
10ms Frame Time
15ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 13,494
Graphics Card
Required 27,862
Your GPU 21,035

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 36 47 58
1440p QHD 50 66 85 105
1080p Full HD 76 100 130 160

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 100
1920x1080 Low 160
1920x1080 Medium 130
1920x1080 Ultra 76
2560x1440 High 66
2560x1440 Low 105
2560x1440 Medium 85
2560x1440 Ultra 50
3840x2160 High 36
3840x2160 Low 58
3840x2160 Medium 47
3840x2160 Ultra 28

Performance Analysis: Palworld on Your System

The Intel Core i3-12100F and NVIDIA GeForce RTX 5050 is a 1080p-first combination for Palworld: it clears the 60 FPS playable threshold at every preset in 1920x1080, at three of four presets in 2560x1440, and at no preset in 3840x2160. Measured frame data confirms this split, with the best 4K result — Low settings at 58 FPS — falling just short of the playable bar. The CPU carries a launch MSRP of $97, and the GPU carries a launch MSRP of 249 USD.

Measured FPS Breakdown

At 1920x1080, the i3-12100F and RTX 5050 deliver strong results across all four presets. Low settings average 160 FPS, giving the largest margin above the 60 FPS threshold of any tested configuration. Medium averages 130 FPS with a minimum of 110 FPS and a maximum of 149 FPS, showing consistent frame delivery even in demanding scenes. High averages 100 FPS, still comfortably above the threshold. Ultra averages 76 FPS, which is the lowest result at this resolution but remains 16 FPS clear of the playable line. The spread between Low and Ultra at 1080p spans from 160 FPS down to 76 FPS, a wide range that indicates the GPU has substantial headroom at this resolution and that settings choices meaningfully trade visual quality for frame rate.

At 2560x1440, the frame rates remain playable for most presets but the margin narrows. Low averages 105 FPS, Medium averages 85 FPS with a minimum of 73 FPS and a maximum of 98 FPS, and High averages 66 FPS — all above the 60 FPS threshold. Ultra drops to 50 FPS, falling below the playable line by a clear margin. The step from High to Ultra at 1440p is the sharpest preset-to-preset transition in this resolution, moving from 66 FPS down to 50 FPS, a loss that reflects the increased shading and memory pressure of the Ultra preset.

At 3840x2160, the combination cannot sustain 60 FPS at any setting. Low averages 58 FPS, just 2 FPS below the threshold — the closest result at 4K. Medium averages 47 FPS with a minimum of 40 FPS and a maximum of 54 FPS, indicating noticeable frame dips during gameplay. High averages 36 FPS, and Ultra averages 28 FPS, both well below playable levels. The 4K results follow a consistent downward pattern: each preset step reduces the average by roughly 9 to 11 FPS, with Low being the only preset that approaches the threshold.

Resolution scaling is steep across the board. From 1080p to 1440p, Low drops from 160 to 105 FPS, Medium from 130 to 85, High from 100 to 66, and Ultra from 76 to 50. From 1440p to 4K, Low drops from 105 to 58, Medium from 85 to 47, High from 66 to 36, and Ultra from 50 to 28. This consistent decline at every preset and every resolution step indicates that the RTX 5050's rendering throughput — 13.17 TFLOPS FP32 and 320.0 GB/s of memory bandwidth — is the dominant constraint as pixel count climbs.

Similar Performance Alternatives

The i3-12100F's average benchmark score of 13494 places it in a tight cluster of comparable CPUs. The Intel Core 3 N355 scores 13492, a 0% delta, making it effectively a performance twin in synthetic tests. The Intel Core i5-9500 scores 13452, 0.3% slower, and the Intel Core i7-1250U scores 13351, 1.1% slower. On the faster side, the Intel Core 5 120UL scores 13594, 0.7% faster. In Palworld, any of these CPUs would produce nearly identical frame rates when paired with the same RTX 5050 GPU, since the differences are all within a narrow band around 1%. Players upgrading from an older 6-core or 8-core platform would see little change in this game's performance with the i3-12100F, as the 4-core/8-thread configuration and 4.30 GHz boost clock keep it competitive with these near-neighbor parts.

The RTX 5050's average benchmark score of 21035 also has close neighbors. The AMD Radeon RX Vega M GL scores 21153, 0.6% faster. The AMD Radeon HD 8970M scores 21237, 1% faster. The AMD Radeon RX 5600 XT scores 20713, 1.6% slower. The NVIDIA RTX A4000 Mobile scores 21379, 1.6% faster. Swapping the RTX 5050 for any of these would shift Palworld frame rates by only a few frames per second at each resolution and preset, likely preserving the same playability verdict — fully playable at 1080p, playable at 1440p up to High, and not playable at 4K. The RX 5600 XT, being the slowest of the group, would push the 1440p High result closer to the 60 FPS line, while the RTX A4000 Mobile would add a small cushion.

CPU and GPU Roles

The i3-12100F is a 4-core, 8-thread processor from Intel's Core 12th Gen Alder Lake-S family. It runs at a 3.30 GHz base clock with a 4.30 GHz boost clock, carries 12 MB of shared L3 cache, and has a 58 W TDP. Its Cinebench R23 multi-core score of 11860 and single-core score of 1674, along with a Geekbench multi-core score of 7252 and single-core score of 1932, paint a picture of a modest but capable entry-level desktop CPU. The PassMark multi-thread score of 14015 and single-thread score of 3444 reinforce this positioning.

The RTX 5050 is a Blackwell 2.0 GPU with 2560 shading units, 80 texture mapping units, 32 raster output units, and 20 ray tracing cores. It has 8 GB of GDDR6 memory on a 128-bit bus, delivering 320.0 GB/s of bandwidth. Its boost clock is 2572 MHz, and it achieves 13.17 TFLOPS of FP32 performance. The GPU's 3DMark Steel Nomad DX12 score of 2502 and PassMark G3D score of 17326 indicate solid mid-range DirectX 12 capability.

In Palworld, the balance of CPU and GPU influence shifts with resolution. At 1920x1080 Low, the 160 FPS average suggests the CPU is keeping pace with the GPU's output. The i3-12100F's single-thread performance — a 1674 Cinebench R23 single-core score — is sufficient to drive high frame rates at low settings. As settings increase to Medium, High, and Ultra at 1080p, the average FPS drops from 130 to 100 to 76, a pattern that reflects increasing GPU workload rather than CPU limitation.

At 2560x1440, the GPU becomes more dominant. The RTX 5050's 8 GB memory capacity and 320.0 GB/s bandwidth are sufficient for Medium and High presets, which average 85 and 66 FPS respectively. Ultra at 1440p falls to 50 FPS, suggesting the GPU's shading and memory subsystems are saturated. At 3840x2160, the GPU is the clear bottleneck — even Low settings only reach 58 FPS, and the GPU's 32 ROPs and 128-bit memory interface limit pixel throughput. The CPU's role diminishes as resolution rises; the i3-12100F's 4 cores and 8 threads are never the primary constraint at 4K, where the GPU's rendering limits dominate.

The data indicates that players with this combo should treat 1080p as the primary gaming resolution, with 1440p viable at reduced settings. The CPU is rarely the limiting factor at higher resolutions; instead, the RTX 5050's mid-range specifications define the performance ceiling. At 1080p Low and Medium, the CPU's single-thread performance keeps frame rates high, but at Ultra and at higher resolutions, the GPU's shading rate and memory bandwidth are the deciding factors.

The Verdict

Yes, this PC can run Palworld, but the playable range is resolution-dependent. At 1920x1080, all four presets — Low, Medium, High, and Ultra — average above 60 FPS, making this a fully playable 1080p configuration. The Ultra preset at 76 FPS is the best visual option, and even the most demanding settings maintain a comfortable margin above the threshold. At 2560x1440, Low, Medium, and High are playable, with High being the best visual option at 66 FPS average; Ultra falls below the threshold at 50 FPS and is not recommended. At 3840x2160, no preset reaches 60 FPS — Low comes closest at 58 FPS, but it still misses the mark, so 4K is not a viable resolution for this combination in Palworld.

How This Combo Ranks

Among 3711 tested CPU-GPU combinations in Palworld, this pairing ranks 2283rd. That places it below the median of tested combos, with more than half of the field ranking higher. The individual components are near the middle of their respective distributions — the i3-12100F sits at the 68th percentile among all CPUs, and the RTX 5050 at the 66th percentile among all GPUs. The combination's mid-pack rank reflects the CPU's 4-core/8-thread limitation and the GPU's 8 GB memory capacity, both of which constrain performance in a demanding open-world survival game like Palworld. The rank of 2283 out of 3711 indicates that while this combo is far from the bottom, it is also not a standout performer in the broader tested field.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 76 FPS. This is the recommended setting for 1080p play, as it delivers the highest visual quality while maintaining a clear margin above the playable threshold. At 2560x1440, the most demanding playable preset is High, averaging 66 FPS. Medium and Low also clear the threshold, but High offers the best visual quality within the 60 FPS requirement. At 3840x2160, no preset meets the 60 FPS threshold. Low comes closest at 58 FPS, but since it falls short, there is no recommended setting at 4K — players seeking 4K would need to lower the resolution or upgrade the GPU.