Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 62 | 80 | 107 | 129 |
| 1440p QHD | 113 | 144 | 191 | 230 |
| 1080p Full HD | 168 | 218 | 288 | 322 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 4090 presents a striking imbalance in Palworld: a modest quad-core processor from the Alder Lake generation driving one of the most powerful consumer GPUs ever produced. The measured frame rates reveal that this combination is not merely playable but overwhelmingly capable, with the RTX 4090’s raw graphics throughput dominating every resolution tested. Across 3840x2160, 2560x1440, and 1920x1080, the data shows average FPS figures that consistently exceed the 60 FPS playable threshold, even at the demanding Ultra preset. The only caveat is that the i3-12100F’s four cores and eight threads may constrain performance in CPU-heavy scenarios, though the benchmark results indicate that even at 1080p, the GPU remains the primary driver of frame rates.
Best Settings per Resolution
The most demanding preset that maintains at least 60 FPS average at each resolution defines the practical ceiling for this combo. At 3840x2160 (4K), the Ultra preset delivers an average of 61.6 FPS, which just clears the 60 FPS playable threshold. This is the highest visual quality setting that remains playable at 4K, though the margin is slim—only 1.6 FPS above the cutoff. For players who prioritize absolute visual fidelity over headroom, this is the optimal choice, but any fluctuation in scene complexity could dip below 60 FPS. The High preset at 4K offers a much safer 79.7 FPS average, providing 32% more performance headroom than Ultra while still delivering strong graphical quality.
At 2560x1440 (1440p), the Ultra preset achieves an average of 113 FPS, which is 88% higher than the 4K Ultra result. This makes Ultra the clear best setting for 1440p, as it not only exceeds 60 FPS by a wide margin but also leaves substantial room for demanding scenes or background tasks. The gap between 4K Ultra (61.6 FPS) and 1440p Ultra (113 FPS) highlights how much resolution scaling affects the RTX 4090’s workload. Moving down to 1920x1080 (1080p), the Ultra preset produces an average of 167.6 FPS, which is the highest playable setting at this resolution. The 1080p Ultra figure is 2.7 times higher than 4K Ultra, demonstrating that the RTX 4090 has ample compute headroom at lower pixel counts, though the i3-12100F’s single-thread performance may begin to matter more at these frame rates.
CPU and GPU Roles
The data reveals a clear pattern: the RTX 4090 is the dominant component across all resolutions, but its influence diminishes as resolution decreases. At 3840x2160, the GPU’s pixel throughput is the primary constraint, as evidenced by the steep drop from 128.6 FPS at Low to 61.6 FPS at Ultra—a 52% reduction. The i3-12100F, with its 4 cores and 8 threads, likely has little impact at 4K because the GPU is fully saturated before the CPU can become a bottleneck. The 3dmark single-thread score of 893 and passmark single-thread score of 3444 suggest the i3-12100F has decent per-core performance, but at 4K, the rendering workload is overwhelmingly GPU-bound.
At 2560x1440, the scaling between settings shows a similar trend but with more headroom. The jump from Low (229.5 FPS) to Ultra (113 FPS) represents a 51% drop, nearly identical to the 4K percentage decrease. This indicates that the GPU is still the limiting factor at 1440p. However, at 1920x1080, the story begins to shift. The Low preset reaches 321.5 FPS, and the Ultra preset hits 167.6 FPS—a 48% reduction. While the GPU still matters most, the i3-12100F’s 3dmark 16-thread score of 4051 and 8-thread score of 4026 suggest that at such high frame rates, the CPU’s ability to feed the GPU becomes more relevant. The fact that 1080p Ultra (167.6 FPS) is only 48% higher than 1440p Ultra (113 FPS), compared to the 88% jump from 4K to 1440p, hints that the CPU is starting to cap performance at lower resolutions. Benchmark results indicate that the RTX 4090 could likely push beyond 200 FPS at 1080p Ultra if paired with a stronger processor, but the i3-12100F’s 4-core design limits this potential.
Measured FPS Breakdown
At 1920x1080, the full settings range shows extraordinary performance. Low settings produce an average of 321.5 FPS, which is the highest figure recorded for this combo. Medium settings reduce this to 287.7 FPS, a 10.5% decrease, while High settings deliver 217.7 FPS, a 32% drop from Low. Ultra settings bring the average down to 167.6 FPS, which is 48% below Low. The progression from Low to Ultra is not linear, with the largest single-step gap occurring between Medium (287.7 FPS) and High (217.7 FPS)—a 24% reduction. This suggests that High settings introduce significant graphical effects that disproportionately impact the GPU, while the jump from High to Ultra (217.7 to 167.6 FPS) is a more modest 23% decrease.
At 2560x1440, the same settings order yields lower absolute numbers but a similar pattern. Low averages 229.5 FPS, Medium drops to 190.6 FPS (17% lower), High reaches 144.1 FPS (37% lower than Low), and Ultra falls to 113 FPS (51% lower than Low). The relative gap between Medium and High at 1440p (24% reduction) mirrors the 1080p result, confirming that this settings tier has a consistent GPU cost regardless of resolution. At 3840x2160, the numbers compress further: Low averages 128.6 FPS, Medium 106.6 FPS (17% lower), High 79.7 FPS (38% lower), and Ultra 61.6 FPS (52% lower). The 4K Ultra figure of 61.6 FPS is the only measurement close to the 60 FPS threshold, and the 4K High result of 79.7 FPS is the second-lowest playable average. Across all resolutions, the data shows that the RTX 4090 scales predictably with settings, but the i3-12100F’s influence becomes more apparent at the highest frame rates, where 1080p Low (321.5 FPS) is the only measurement exceeding 300 FPS.
How This Combo Ranks
Within the benchmark database, this specific CPU-GPU combination ranks 152nd out of 3,711 tested combos for Palworld. This places the combo in the top 4.1% of all systems tested, which is exceptionally high given that the i3-12100F is a budget-oriented processor. The RTX 4090’s percentileVsAllGpus of 88 indicates that it outperforms 88% of all GPUs in the database, while the i3-12100F’s percentileVsAllCpus of 68 shows it beats 68% of all CPUs. The rank of 152 suggests that most of the 151 combos ahead of this one likely feature higher-end CPUs paired with the RTX 4090, as the GPU’s raw performance is sufficient to carry the combo to near-top-tier status. The data implies that the i3-12100F does not meaningfully hold back the RTX 4090 in Palworld at the tested resolutions, otherwise the rank would be significantly lower. However, the rank also reflects that other combos with stronger processors achieve higher frame rates, particularly at 1080p where CPU limits are more likely to surface.
Similar Performance Alternatives
The nearest rivals for the Intel Core i3-12100F provide context for what other CPUs might behave similarly in this combo. The Intel Core 3 N355 has an average benchmark score of 13,492, which is essentially identical to the i3-12100F’s 13,494, with a deltaPct of 0. This suggests that swapping the i3-12100F for a Core 3 N355 would produce nearly identical CPU-bound performance in Palworld. The Intel Core i5-9500 scores 13,452, a 0.3% difference, indicating that this older six-core processor would also perform comparably. The Intel Core 5 120UL scores 13,594, which is 0.7% higher, and the Intel Core i7-1250U scores 13,351, which is 1.1% lower. These four CPUs bracket the i3-12100F’s performance within a tight 1.8% range, meaning that any of them would yield similar frame rates when paired with the RTX 4090. For the GPU side, the nearest rivals to the RTX 4090 include the Intel Arc Pro A60 with an average score of 60,326 (0% delta), the AMD Radeon Pro Vega 48 at 60,140 (0.3% lower), the AMD Radeon Pro W6600M at 61,896 (2.5% higher), and the AMD Radeon PRO V710 at 58,657 (2.9% lower). These GPUs are workstation-oriented parts that would likely produce similar Palworld frame rates to the RTX 4090, though their driver support and game-specific optimizations might differ.
FAQ
Q: Can this combo run Palworld at 4K Ultra settings?
A: Yes, the measured average FPS at 3840x2160 Ultra is 61.6 FPS, which exceeds the 60 FPS playable threshold. This is the most demanding setting that remains playable at 4K, though the margin is only 1.6 FPS.
Q: What is the highest playable setting at 1440p?
A: The Ultra preset at 2560x1440 achieves an average of 113 FPS, making it the best setting that clears 60 FPS. All four settings—Low, Medium, High, and Ultra—are playable at this resolution.
Q: Does the CPU bottleneck the GPU at 1080p?
A: The data suggests partial CPU limitation at 1080p. The 321.5 FPS average at Low settings is the highest measured value, but the 167.6 FPS at Ultra indicates the i3-12100F’s 4-core design may cap performance, as the GPU could likely push higher frame rates with a stronger processor.
Q: How does this combo rank compared to other tested systems?
A: This combo ranks 152nd out of 3,711 tested combos for Palworld, placing it in the top 4.1% of all systems. The RTX 4090’s high performance drives this ranking despite the budget CPU.
Q: What CPUs are similar in performance to the i3-12100F?
A: The Intel Core 3 N355 has a 0% deltaPct, the Intel Core i5-9500 is 0.3% slower, the Intel Core 5 120UL is 0.7% faster, and the Intel Core i7-1250U is 1.1% slower. Any of these would yield comparable results.
Q: Is the 60 FPS threshold met at all resolutions?
A: Yes, all four settings at 3840x2160, 2560x1440, and 1920x1080 produce average FPS above 60. The lowest measured value is 61.6 FPS at 4K Ultra, and the highest is 321.5 FPS at 1080p Low.
The Verdict
This PC can absolutely run Palworld, and it does so with exceptional headroom at every resolution. The verdictByResolution data confirms that all settings at 3840x2160, 2560x1440, and 1920x1080 are playable, with the best settings being Ultra at each resolution. At 4K, the Ultra preset averages 61.6 FPS, which is just above the 60 FPS threshold—playable but with limited margin for demanding scenes. At 1440p, Ultra delivers 113 FPS, offering a comfortable buffer of 88% above the threshold. At 1080p, Ultra reaches 167.6 FPS, which is 179% above the threshold and ideal for high-refresh-rate displays. The data shows that the RTX 4090 is the star of this combo, providing massive graphics throughput that overcomes the i3-12100F’s modest 4-core design. The only potential weakness is at 1080p Low settings, where the 321.5 FPS figure suggests CPU limits, but this is far beyond any practical display refresh rate. For Palworld, this combination is a high-performance machine that handles the game’s survival mechanics and open-world environments with ease, making it suitable for players who want maximum visual quality without sacrificing frame rate. The i3-12100F’s low cost relative to the RTX 4090’s launch MSRP of 1,599 USD creates an unusual pairing, but the benchmark results indicate that it works effectively for this specific title.