Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Your GPU supports ray tracing.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 35 | 46 | 60 | 75 |
| 1440p QHD | 64 | 84 | 109 | 134 |
| 1080p Full HD | 97 | 127 | 165 | 204 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
# How This Combo Ranks
The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3070 places at rank 1591 out of 3711 tested combos in Palworld. That places this configuration in the upper-middle tier of all tested hardware combinations, roughly in the 43rd percentile of all combos. The CPU itself sits at the 68th percentile among all CPUs, while the GPU lands at the 61st percentile among all GPUs — meaning neither component is a top-tier part, but together they form a balanced pairing that outperforms more than half of all tested systems in this specific game.
The rank of 1591 out of 3711 reflects a system that can handle Palworld well at most settings, but it is not among the elite configurations. The combo's position is driven primarily by the GPU's strong raw performance, as the RTX 3070's average benchmark score of 17208 places it well above the median GPU, while the i3-12100F's average score of 13494 is respectable for a quad-core part. The data indicates this is a combination where the GPU carries more weight in determining overall game performance, especially at higher resolutions where the graphics card becomes the limiting factor.
# Best Settings per Resolution
At 1920x1080, the best playable setting is Ultra, delivering an average of 97 FPS. This is well above the 60 FPS playable threshold, and the gap between Ultra and the next tier down is substantial — High runs at 127 FPS, Medium at 165 FPS, and Low at 204 FPS. The 1080p Ultra result shows this combo has considerable headroom at the most common resolution.
Moving to 2560x1440, Ultra remains the best setting, with an average of 64 FPS. This just clears the 60 FPS threshold, making it the most demanding preset that stays playable. The step down to High yields 84 FPS, representing a 20 FPS improvement over Ultra, while Low reaches 134 FPS. At 1440p, the system still has enough performance for maximum settings, but the margin above the playable threshold is slim.
At 3840x2160, the picture changes significantly. Ultra drops to 35 FPS, which is far below playable, and High also falls short at 46 FPS. Medium is the best playable setting, running at exactly 60 FPS average, with a minimum of 51 FPS and a maximum of 69 FPS. Low runs at 75 FPS. This means at 4K, users must sacrifice visual quality to Medium to maintain playable frame rates, and even then, the minimum FPS dips below 60, indicating occasional stutter during demanding scenes.
The overall pattern is clear: this combo is excellent for 1080p and 1440p gaming at maximum settings, but at 4K it requires dropping to Medium settings to stay playable.
# CPU and GPU Roles
The data reveals a clear shift in which component matters more as resolution increases. At 1920x1080, the CPU plays a more significant role because the GPU can produce very high frame rates — Low settings hit 204 FPS, Ultra hits 97 FPS. At these frame rates, the i3-12100F's quad-core design with 8 threads becomes more relevant, as the CPU must keep up with the GPU's output. The CPU's 3dmark single-thread score of 893 and 4-thread score of 2859 indicate adequate single-thread performance for handling game logic at high frame rates.
At 2560x1440, the balance shifts toward the GPU. The frame rates at Low settings drop from 204 FPS at 1080p to 134 FPS, a 34% reduction, while Ultra drops from 97 to 64 FPS, a 34% reduction as well. This consistent scaling across settings suggests the GPU is becoming the primary bottleneck at this resolution. The RTX 3070's 8 GB of GDDR6 memory on a 256-bit bus with 448 GB/s bandwidth is sufficient for 1440p, but the rendering load is clearly GPU-bound.
At 3840x2160, the GPU dominates entirely. The average frame rate at Low settings is 75 FPS, which is only 56% of the 134 FPS seen at 1440p Low. Ultra drops to 35 FPS, less than one-third of the 1080p Ultra result. This steep decline with resolution is typical of a GPU-bound scenario. The RTX 3070's 5888 shading units and 184 texture mapping units are being pushed to their limits at 4K, while the CPU has minimal impact on the final frame rate.
The verdict data confirms this: at 4K, only Low and Medium are playable, with Medium being the best at 60 FPS. At 1440p and 1080p, all four settings are playable, with Ultra being the best. This indicates the GPU is the limiting factor at 4K, while the CPU is sufficient for all tested settings at lower resolutions.
# Similar Performance Alternatives
Looking at the CPU's nearest rivals, the Intel Core 3 N355 has an average benchmark score of 13492, essentially identical to the i3-12100F's 13494, with a delta of 0%. This means the i3-12100F and Core 3 N355 would perform nearly identically in Palworld. The Intel Core i5-9500 scores 13452, only 0.3% lower, indicating a negligible performance difference. The Intel Core 5 120UL scores 13594, which is 0.7% higher, while the Intel Core i7-1250U scores 13351, 1.1% lower. All four CPUs sit within a 1.8% performance band, meaning any of them would produce virtually the same frame rates in Palworld when paired with the RTX 3070.
For the GPU, the AMD Radeon RX 7600 XT has an average score of 17083, just 0.7% below the RTX 3070's 17208. This indicates the RX 7600 XT would deliver nearly identical performance in Palworld. The NVIDIA GeForce GTX 690 scores 17037, 1% lower, while the AMD Radeon HD 7970M scores 17019, 1.1% lower. The NVIDIA Tesla K40c scores 17468, which is 1.5% higher. These deltas are all small enough that in real-world gaming, the differences would be within the margin of error for frame rate measurements. Users with any of these GPUs paired with the i3-12100F should expect similar Palworld performance to what the data shows for the RTX 3070.
# Measured FPS Breakdown
At 1920x1080, the lowest setting produces an average of 204 FPS, with no minimum or maximum recorded. Medium runs at 165 FPS average, with a minimum of 141 and a maximum of 190 FPS. High delivers 127 FPS average. Ultra runs at 97 FPS average. All four settings are well above the 60 FPS playable threshold, with even the most demanding preset nearly doubling it.
At 2560x1440, Low averages 134 FPS, Medium averages 109 FPS with a minimum of 93 and maximum of 125 FPS, High averages 84 FPS, and Ultra averages 64 FPS. The spread between Low and Ultra is 70 FPS, showing the significant impact of settings at this resolution. The minimum of 93 FPS at Medium indicates that even during demanding scenes, the system maintains high frame rates.
At 3840x2160, the frame rates drop considerably. Low averages 75 FPS, Medium averages 60 FPS with a minimum of 51 and maximum of 69 FPS, High averages 46 FPS, and Ultra averages 35 FPS. Only Low and Medium are playable at this resolution, and Medium's minimum of 51 FPS suggests occasional drops below the 60 FPS threshold during intense gameplay moments. The 40 FPS gap between Low and Ultra at 4K is proportionally larger than at lower resolutions, confirming the GPU is the limiting factor here.
The scaling from 1080p to 4K at each setting shows a consistent pattern: Low drops from 204 to 75 FPS (63% reduction), Medium from 165 to 60 FPS (64% reduction), High from 127 to 46 FPS (64% reduction), and Ultra from 97 to 35 FPS (64% reduction). This uniform scaling across all settings is a clear indicator of GPU-bound performance at higher resolutions.
# FAQ
Q: Can this combo run Palworld at 4K with playable frame rates?
A: Yes, but only at Medium settings or lower. Medium runs at exactly 60 FPS average, with a minimum of 51 FPS and maximum of 69 FPS. Low runs at 75 FPS. High and Ultra are not playable at 4K, averaging 46 FPS and 35 FPS respectively.
Q: What is the best setting at 1440p for this hardware?
A: Ultra is the best playable setting at 2560x1440, delivering 64 FPS average. This just clears the 60 FPS playable threshold. High runs at 84 FPS, Medium at 109 FPS, and Low at 134 FPS.
Q: How much performance difference is there between Low and Ultra at 1080p?
A: At 1920x1080, Low runs at 204 FPS average while Ultra runs at 97 FPS average. This represents a 107 FPS difference, meaning Ultra delivers 47.5% of the frame rate of Low.
Q: Is the CPU or GPU more important for this game?
A: The GPU becomes the dominant factor at higher resolutions. At 1080p, the CPU matters more due to high frame rates, but at 1440p and especially 4K, the GPU is the clear bottleneck. The uniform 64% frame rate drop from 1080p to 4K across all settings confirms GPU-bound performance at higher resolutions.
Q: What GPU would perform similarly to the RTX 3070 in Palworld?
A: The AMD Radeon RX 7600 XT is the closest match, with an average benchmark score 0.7% lower than the RTX 3070. The NVIDIA GeForce GTX 690 is 1% lower, and the AMD Radeon HD 7970M is 1.1% lower. The NVIDIA Tesla K40c is 1.5% higher.
Q: Does this combo ever drop below 60 FPS at playable settings?
A: At 4K Medium, the minimum FPS is 51, which falls below the 60 FPS threshold even though the average is exactly 60. At 1440p Medium, the minimum is 93 FPS, and at 1080p Medium, the minimum is 141 FPS — both well above the threshold. The 4K Medium setting is the only playable configuration where frame drops below 60 FPS occur.