Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 23 | 28 |
| 1440p QHD | 24 | 31 | 41 | 50 |
| 1080p Full HD | 36 | 47 | 62 | 76 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The pairing of AMD's Ryzen 9 9950X3D with Intel's Arc B370 is one of the more unusual combinations in the database: a flagship 16-core desktop processor attached to an integrated-class GPU. The question for Palworld, a survival title released in early 2024, is whether the Intel iGPU can keep pace with a CPU that sits in the 95th percentile of all processors tested. The measured data tells a clear and somewhat sobering story, with exactly one resolution and two presets clearing the 60 FPS playability threshold.
Measured FPS Breakdown
At 1920x1080, the recorded averages climb steadily as settings come down. Ultra manages 36 FPS. High reaches 47. Medium sits at 62 FPS with a minimum of 52 and a maximum of 71, the only configuration in the entire dataset with frame time spread recorded. Low delivers 76 FPS, the highest single number in the dataset. The Medium and Low presets are the two that clear the 60 FPS threshold.
At 2560x1440, the picture degrades sharply. Low averages 50 FPS, Medium 41 FPS with a minimum of 35 and a maximum of 47, High 31 FPS, and Ultra 24 FPS. None of these reach 60, and even the Low preset falls a full ten frames short.
At 3840x2160, the results are uncomfortable to read. Ultra averages 13 FPS, High 17, Medium 23 FPS with a minimum of 19 and a maximum of 26, and Low just 28 FPS. That is less than half the playability threshold at the least demanding preset the game offers.
The pattern across resolutions is consistent and informative: moving from 1080p to 1440p costs roughly a third of the frame rate at every preset, and moving to 4K roughly halves it again. Palworld's visuals do not survive that scaling on this GPU, and the data leaves no ambiguity about it.
FAQ
Q: Can this PC run Palworld at 60 FPS?
A: Yes, but only at 1920x1080 and only at Low (76 FPS) or Medium (62 FPS) settings. Every preset at 2560x1440 and 3840x2160 falls below the 60 FPS threshold.
Q: What is the single fastest configuration measured?
A: 1920x1080 at Low settings, averaging 76 FPS.
Q: What is the slowest configuration measured?
A: 3840x2160 at Ultra settings, averaging 13 FPS.
Q: How consistent are the frame rates at playable settings?
A: At 1920x1080 Medium, the data shows a range of 52 to 71 FPS around the 62 FPS average, meaning dips below 60 occur during gameplay despite the average holding above the line.
Q: How does the CPU compare to its nearest rivals?
A: The Ryzen 9 9950X3D's average benchmark score of 75779 sits within a fraction of a percent of the AMD Ryzen 7 PRO 9755 (0.1 percent), AMD Ryzen 7 PRO 9755X3D (0.1 percent), AMD EPYC 8224P (0.3 percent), and Intel Core Ultra 9 285 (0.4 percent). It is elite CPU hardware.
Q: How does the GPU compare to its nearest rivals?
A: The Arc B370's average score of 1184 places it in the 5th percentile of all GPUs, within striking distance of the ATI Mobility Radeon HD 5570, ATI Radeon HD 5770, AMD Radeon HD 7650M, and AMD FirePro M2000.
Similar Performance Alternatives
On the CPU side, the recorded data suggests the AMD Ryzen 7 PRO 9755 and Ryzen 7 PRO 9755X3D, separated by only 0.1 percent in average score, would behave nearly identically in any CPU-bound scenario, as would the Intel Core Ultra 9 285 at a 0.4 percent gap. The AMD EPYC 8224P at 0.3 percent behind rounds out the cluster. In practice, swapping the 9950X3D for any of these would not change the gaming outcome recorded here, because none of them are the limiting factor.
On the GPU side, the alternatives are more relevant to this analysis. The Arc B370's score of 1184 lands it statistically alongside the ATI Radeon HD 5770 (1190, a 0.5 percent gap), ATI Mobility Radeon HD 5570 (1186, 0.2 percent), AMD Radeon HD 7650M (1192, 0.7 percent), and AMD FirePro M2000 (1168, 1.4 percent behind the Intel part). Any of these GPUs paired with the same class of CPU would be expected to produce Palworld frame rates in the same neighborhood as the numbers above.
The Verdict
The verdict by resolution is unambiguous. At 1920x1080, Palworld is playable at Low (76 FPS) and Medium (62 FPS), with Medium flagged as the best settings configuration at that resolution. At 2560x1440, no preset clears the threshold; the best result is 50 FPS at Low. At 3840x2160, nothing comes close, topping out at 28 FPS at Low.
So, can this PC run Palworld? At 1080p, yes, with reduced settings. At 1440p and 4K, no, and not by a small margin. The 1080p Medium figure of 62 FPS is the only result that combines acceptable detail with an average above the line, and even there the recorded minimum of 52 FPS indicates dips into noticeably choppy territory.
CPU and GPU Roles
The division of labor here is extreme. The Ryzen 9 9950X3D brings 16 cores and 32 threads, a 5.70 GHz boost clock, 128 MB of L3 cache, and benchmark results including 42018 in Cinebench R23 multi-core, 26736 in Geekbench multi-core, and 70255 in PassMark multithread, placing it in the 95th percentile of all CPUs in the database. The Arc B370, by contrast, sits in the 5th percentile of all GPUs, with 1280 shading units, 6.144 TFLOPS of FP32 throughput, and a single recorded 3DMark Steel Nomad score of 1184.
The scaling data makes the bottleneck obvious. Frame rates respond dramatically to resolution and settings changes, dropping from 76 FPS at 1080p Low to 28 FPS at 4K Low and from 76 to 36 between 1080p Low and 1080p Ultra. That is the signature of a GPU-limited configuration: the processor could feed far more frames than the integrated graphics can render. For Palworld specifically, at every resolution tested, the Arc B370 is the component that decides the outcome. The CPU's contribution is effectively invisible in these numbers, any of its nearest rivals would produce indistinguishable results behind this GPU.
One wrinkle worth noting: the Arc B370 uses system-shared memory on a dual-channel DDR5 platform with 89.6 GB/s of memory bandwidth, so the quality of the system memory configuration is not a neutral factor for this particular pairing.
Best Settings per Resolution
- 1920x1080: Medium, averaging 62 FPS. This is the most demanding preset that stays at or above 60 FPS at this resolution. High drops to 47, well under the line.
- 2560x1440: None. Low at 50 FPS is the closest any preset comes, and it is below the threshold. There is no 60 FPS configuration at this resolution.
- 3840x2160: None. Low at 28 FPS is the best available, less than half the target.
How This Combo Ranks
Within Palworld specifically, this pairing ranks 3423 out of 3711 tested combinations in the database. That position, in the bottom tier of all measured configurations for this game, aligns precisely with the component analysis: a 95th-percentile CPU strapped to a 5th-percentile GPU produces results driven entirely by the weaker half. The 9950X3D is being wasted on Palworld here, and the data suggests that any improvement in this setup's ranking would come from the graphics side, not the processor. For owners of this exact hardware, the recorded data points to 1080p Medium as the ceiling, and nothing in the measurements argues otherwise.