Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

87%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
144 FPS
Ultra 1080p Measured
67 FPS

1440p (2K / QHD)

Low 1440p Measured
95 FPS
Ultra 1440p Measured
45 FPS

4K (Ultra HD)

Low 4K Measured
55 FPS
Ultra 4K Measured
23 FPS
10.8ms Frame Time
16ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 57,498
Graphics Card
Required 27,862
Your GPU 23,021

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 34 40 55
1440p QHD 45 61 77 95
1080p Full HD 67 93 120 144

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 93
1920x1080 Low 144
1920x1080 Medium 120
1920x1080 Ultra 67
2560x1440 High 61
2560x1440 Low 95
2560x1440 Medium 77
2560x1440 Ultra 45
3840x2160 High 34
3840x2160 Low 55
3840x2160 Medium 40
3840x2160 Ultra 23

Performance Analysis: Palworld on Your System

The AMD Ryzen 9 9900X paired with the Intel Arc B580 delivers a playable Palworld experience at 1080p and 1440p, but falls short of the 60 FPS threshold at 4K across all tested presets. At 1080p, the combo clears 60 FPS even at Ultra settings, while 1440p requires dropping to High for a stable frame rate. The data shows a clear performance ceiling at 3840x2160, where even Low settings average only 54.7 FPS.

Measured FPS Breakdown

Benchmark results for Palworld were recorded at three resolutions and four quality presets, with all figures representing average frame rates. The highest performance comes at 1920x1080 with Low settings, where the combo reaches 144.3 FPS. This represents the absolute peak in the dataset and indicates substantial headroom for high-refresh-rate monitors at this resolution. At the same 1080p resolution, Medium settings produce 119.6 FPS, High settings yield 92.7 FPS, and Ultra settings hold at 66.9 FPS. The scaling from Low to Ultra at 1080p shows a 77.4 FPS drop, demonstrating that the quality preset has a significant impact on performance even at the lowest resolution tested.

Moving to 2560x1440, the frame rates remain playable but with a noticeable reduction across the board. Low settings average 94.8 FPS, Medium produces 77.4 FPS, and High delivers 61.4 FPS. Ultra settings at 1440p fall below the playable threshold at 45 FPS. The transition from 1080p to 1440p at equivalent settings costs approximately 49.5 FPS at Low, 42.2 FPS at Medium, 31.3 FPS at High, and 21.9 FPS at Ultra. This pattern suggests that the Arc B580's rendering load scales substantially with pixel count, while the CPU overhead remains relatively constant.

At 3840x2160, performance drops sharply. Low settings average 54.7 FPS, which is the only preset to approach the 60 FPS threshold. Medium settings produce 40.3 FPS, High settings yield 33.5 FPS, and Ultra settings fall to 22.7 FPS. The difference between 1440p and 4K at Low settings is 40.1 FPS, while at Ultra settings the gap narrows to 22.3 FPS. These figures indicate that 4K resolution demands significantly more from the GPU, and the Intel Arc B580's 12 GB memory buffer and 456.0 GB/s bandwidth are insufficient to maintain smooth frame rates at this resolution in Palworld.

The data reveals that Palworld's performance scaling is not linear across resolutions or presets. The largest single-step drop occurs between 1080p Low and 1440p Low, where the frame rate falls by 49.5 FPS. Conversely, the smallest drop between adjacent presets occurs at 4K between Medium and High, with a difference of only 6.8 FPS. This suggests that at higher resolutions, the GPU becomes the primary bottleneck, and further quality increases yield diminishing returns in frame rate.

Best Settings per Resolution

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 66.9 FPS. This provides a comfortable margin above the playable threshold while delivering the maximum visual quality available in the benchmark. The 6.9 FPS buffer between the Ultra average and the 60 FPS threshold suggests that minor in-game fluctuations would not typically cause frame rates to drop below playable levels.

At 2560x1440, the best playable setting is High, which averages 61.4 FPS. This preset provides a slim 1.4 FPS margin above the 60 FPS threshold. Medium settings at this resolution achieve 77.4 FPS and offer additional headroom if users prefer smoother motion over visual fidelity. Ultra settings at 1440p fall short at 45 FPS, making them unsuitable for maintaining a consistent 60 FPS experience.

At 3840x2160, no preset achieves the 60 FPS threshold. Low settings come closest at 54.7 FPS, which is 5.3 FPS below the playable threshold. Medium settings average 40.3 FPS, High settings produce 33.5 FPS, and Ultra settings drop to 22.7 FPS. The verdict data confirms that 4K resolution is not viable for this combo in Palworld, regardless of quality settings. Users targeting 60 FPS at 4K would need to consider either a more powerful GPU or a reduction in resolution.

FAQ

Q: Can the AMD Ryzen 9 9900X and Intel Arc B580 run Palworld at 1080p?

A: Yes, the combo achieves 60 FPS or higher at all four tested presets in 1920x1080. Low settings average 144.3 FPS, Medium averages 119.6 FPS, High averages 92.7 FPS, and Ultra averages 66.9 FPS.

Q: What is the best quality preset for 1440p gaming?

A: High is the most demanding preset that clears the 60 FPS threshold, averaging 61.4 FPS at 2560x1440. Medium provides more headroom at 77.4 FPS, while Ultra falls below playable at 45 FPS.

Q: Is 4K gaming possible with this hardware?

A: No, at 3840x2160 all presets fall below 60 FPS. Low settings come closest with an average of 54.7 FPS, followed by Medium at 40.3 FPS, High at 33.5 FPS, and Ultra at 22.7 FPS.

Q: How does the Ultra preset compare to High at 1080p?

A: At 1920x1080, Ultra averages 66.9 FPS, which is 25.8 FPS lower than High's 92.7 FPS. Both presets remain above the 60 FPS threshold, but the difference represents a 27.8% performance cost for the higher quality settings.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low averages 94.8 FPS while Ultra averages 45 FPS. This represents a 49.8 FPS difference, with Low providing more than double the frame rate of Ultra at this resolution.

Q: Does the combo rank well among tested systems?

A: The combo ranks 2841 out of 3711 tested combinations for Palworld, placing it in the lower-middle portion of the database. The GPU's percentile versus all GPUs is 68, while the CPU's percentile versus all CPUs is 92.

The Verdict

This PC can run Palworld at 1080p with any preset, including Ultra at 66.9 FPS, and at 1440p with High settings at 61.4 FPS. The 1920x1080 resolution offers the best combination of visual quality and performance, with Ultra providing a playable experience while retaining a 6.9 FPS margin above the threshold. For 1440p, High is the recommended preset, though the 1.4 FPS buffer above 60 FPS is tight. Users who prioritize frame rate stability may prefer Medium at 77.4 FPS.

At 3840x2160, the verdict is clear: this combo cannot maintain 60 FPS at any tested quality setting. The closest result is Low at 54.7 FPS, which falls 5.3 FPS short of the threshold. The performance drop from 1440p to 4K is substantial across all presets, confirming that the Intel Arc B580's compute capabilities are the limiting factor at higher resolutions. The data indicates that Palworld players using this hardware should target 1080p for the full range of quality options or accept a High preset cap at 1440p.

The benchmark results show that this system is suitable for Palworld at mainstream resolutions. The 1080p Ultra performance at 66.9 FPS demonstrates that the combo has sufficient headroom for the game's default maximum settings without requiring compromises. At 1440p, the system remains viable but with less margin for error, and 4K is not a realistic target.

CPU and GPU Roles

The scaling between resolutions reveals how the CPU and GPU each contribute to Palworld's performance. At 1080p, the frame rates range from 66.9 FPS at Ultra to 144.3 FPS at Low, showing that the GPU has ample capacity to render frames quickly when the resolution is low. The Ryzen 9 9900X, with its 12 cores and 24 threads, provides sufficient processing power to feed the Arc B580 at this resolution, as evidenced by the high frame rates at Low and Medium settings.

The transition to 1440p shows a consistent performance reduction across all presets, with frame rates dropping by approximately 31-49 FPS depending on the quality setting. This reduction is primarily attributable to the GPU's increased rendering workload, as the pixel count at 1440p is roughly 1.78 times that of 1080p. The CPU's role becomes less prominent at this resolution, as the bottleneck shifts toward the Arc B580's 13.67 TFLOPS of FP32 compute and 456.0 GB/s of memory bandwidth.

At 4K, the GPU bottleneck becomes decisive. The frame rates at 3840x2160 are dramatically lower than at 1440p, with even Low settings failing to reach 60 FPS. The difference between 1440p Low and 4K Low is 40.1 FPS, and between 1440p Ultra and 4K Ultra is 22.3 FPS. This scaling pattern indicates that Palworld at 4K demands more from the GPU than the Arc B580 can deliver, while the CPU's contribution remains relatively constant across resolutions.

The preset scaling within each resolution further clarifies the component roles. At 1080p, the difference between Low and Ultra is 77.4 FPS, suggesting that the GPU's shading units and texture units are heavily utilized at higher quality settings. At 4K, the same preset range produces only a 32 FPS difference, indicating that the GPU is already saturated and additional quality settings have diminishing impact on frame rate. The data supports the conclusion that the Intel Arc B580 is the primary performance determinant in this pairing, with the Ryzen 9 9900X providing ample support without becoming a limiting factor at any resolution tested.

How This Combo Ranks

In the benchmark database for Palworld, this AMD Ryzen 9 9900X and Intel Arc B580 combination ranks 2841 out of 3711 tested combos, placing it in the 76th percentile of all systems. This ranking reflects the GPU's position as the performance bottleneck, as the Arc B580 sits at the 68th percentile among all GPUs while the Ryzen 9 9900X ranks at the 92nd percentile among all CPUs. The disparity between the two components' percentile rankings explains why the combo ranks lower than the CPU's individual performance might suggest.

The GPU's nearest rivals provide context for its performance in this pairing. The Intel Arc B580's average benchmark score of 23021 is closely matched by the AMD Radeon RX 580 2048SP at 23061 (0.2% higher), the NVIDIA GeForce RTX 3080 at 23172 (0.7% higher), and the NVIDIA P106-100 at 23249 (1% higher). The NVIDIA GeForce RTX 2080 trails slightly at 22895 (0.6% lower). These comparisons indicate that the Arc B580 performs in a similar range to several older and newer GPUs, though the measured Palworld frame rates may differ from synthetic benchmark scores.

The CPU's nearest rivals show a tighter grouping. The AMD Ryzen 9 9900X's average benchmark score of 57498 is nearly identical to the AMD EPYC 9015 at 57555 (0.1% higher) and the AMD EPYC 7313 at 57399 (0.2% lower). The Intel Core i9-14900 scores 58115 (1.1% higher), and the Intel Xeon Platinum 8260M scores 58323 (1.4% higher). These small deltas suggest that the CPU choice has minimal impact on the overall combo ranking, as the GPU's performance envelope dominates the Palworld results.

The 2841st rank out of 3711 combos indicates that this system falls in the lower portion of tested configurations for Palworld. This positioning is consistent with the measured frame rates, which show playable performance at 1080p and 1440p but not at 4K. The combo's ranking suggests that users seeking higher Palworld performance would benefit more from a GPU upgrade than a CPU upgrade, given the CPU's strong individual ranking and the GPU's mid-range position.