Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
61 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
40 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
22 FPS
12.3ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 57,498
Graphics Card
Required 27,862
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 30 38 47
1440p QHD 40 53 69 85
1080p Full HD 61 81 105 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 81
1920x1080 Low 130
1920x1080 Medium 105
1920x1080 Ultra 61
2560x1440 High 53
2560x1440 Low 85
2560x1440 Medium 69
2560x1440 Ultra 40
3840x2160 High 30
3840x2160 Low 47
3840x2160 Medium 38
3840x2160 Ultra 22

Performance Analysis: Palworld on Your System

The AMD Ryzen 9 9900X and Intel Arc B570 combination presents a compelling study in how a high-end CPU can enable a mid-range GPU to reach playable framerates in Palworld, though the data clearly shows that 4K remains out of reach. This analysis breaks down the measured performance across resolutions, the roles each component plays, and how this pairing compares to other tested configurations.

Best Settings per Resolution

The benchmark data for this CPU-GPU combo in Palworld reveals a clear performance ceiling at each resolution. At 1920x1080, the system achieves its most demanding playable preset at Ultra settings, with an average of 61 FPS. This is the highest quality setting that maintains an average above the 60 FPS playable threshold.

Moving to 2560x1440, the most demanding preset that stays at or above 60 FPS is Medium, with an average framerate of 69 FPS. While High settings at this resolution produce a respectable 53 FPS average, it falls short of the 60 FPS target, making Medium the optimal balance for smooth gameplay.

At 3840x2160, the situation changes dramatically. No settings preset achieves an average of 60 FPS or higher. The best-case scenario is Low settings, which yield only 47 FPS on average. The data indicates that 4K gaming is simply not viable with this hardware combination for Palworld, as even the lowest quality settings cannot reach the playable threshold.

FAQ

Q: Can this system run Palworld at 60 FPS on a 4K monitor?

A: No. According to the measured FPS data, at 3840x2160 the highest average framerate achieved is 47 FPS on Low settings. The verdict by resolution confirms that there are no playable settings at this resolution, meaning no preset reaches the 60 FPS playable threshold.

Q: What is the best visual quality preset at 1440p that maintains 60 FPS?

A: Medium settings is the most demanding preset that clears the threshold, with an average of 69 FPS. High settings at this resolution only reach 53 FPS on average, which falls below the playable threshold.

Q: How does the Intel Arc B570 perform relative to its closest competitors?

A: The Arc B570's average benchmark score is 20556, placing it at the 65th percentile of all GPUs. Its nearest rival is the Intel Arc A750 with a score of 20582, a difference of -0.1%, and the NVIDIA GeForce RTX 3070 Mobile at 20534, a 0.1% difference. The data suggests these GPUs would perform nearly identically.

Q: What is the CPU's standing compared to other processors?

A: The AMD Ryzen 9 9900X has an average benchmark score of 57498, ranking in the 92nd percentile of all CPUs. Its closest competitor is the AMD EPYC 9015 with a score of 57555, which is only -0.1% different, indicating near-identical performance.

Q: Is there a settings preset at 1080p that delivers over 100 FPS?

A: Yes. Low settings at 1920x1080 produce an average of 130 FPS, and Medium settings deliver 105 FPS. High settings also exceed 60 FPS with an 81 FPS average, but only the lower two presets break the 100 FPS mark.

Q: Does the system ever drop below 60 FPS at 1080p with Medium settings?

A: The measured data shows a minimum framerate of 89 FPS at 1920x1080 with Medium settings, so it does not drop below 60 FPS. The maximum recorded was 121 FPS, giving a narrow but stable range.

How This Combo Ranks

This specific pairing of the AMD Ryzen 9 9900X and Intel Arc B570 ranks 2985th out of 3711 tested combos for Palworld. This places it in the lower portion of the overall distribution, which is a direct consequence of the GPU's mid-range positioning. The CPU is exceptionally strong — scoring in the 92nd percentile of all CPUs — but the GPU's 65th percentile ranking acts as a bottleneck. The combination's rank suggests that while the CPU is overqualified for this task, the GPU limits the overall gaming experience, particularly at higher resolutions. The data implies that for this specific game, the GPU is the primary determinant of the combo's rank, as the CPU's superior benchmark scores cannot compensate for the GPU's throughput limitations when rendering demanding scenes.

Similar Performance Alternatives

Looking at the nearest rivals for each component, several alternative pairings would produce very similar results in Palworld. On the GPU side, the Intel Arc A750 has an average score of 20582, which is -0.1% relative to the Arc B570's 20556. The NVIDIA GeForce RTX 3070 Mobile scores 20534, a 0.1% difference. The data suggests these three GPUs are virtually interchangeable in performance, meaning a build with an Arc A750 would likely produce nearly identical framerates in Palworld.

For the CPU, the AMD EPYC 9015 scores 57555 (-0.1% vs. the 9900X), and the Intel Core i9-14900 scores 58115 (-1.1%). Since the CPU is not the limiting factor in this game at most settings, swapping to any of these processors would have a negligible impact on the measured FPS. The bottleneck is clearly the GPU, so alternative combos should focus on matching the Arc B570's performance level. The data indicates that users seeking similar gameplay experiences should look for GPUs within the same performance band, as the CPU choice is far less critical for Palworld's framerates.

Measured FPS Breakdown

The measured FPS data provides a detailed look at performance across all three resolutions and four settings presets.

At 1920x1080, the system performs admirably across the board. Low settings deliver an average of 130 FPS. Medium settings produce 105 FPS on average, with a minimum of 89 FPS and maximum of 121 FPS. High settings reach 81 FPS on average, and Ultra settings still manage 61 FPS on average. All presets at this resolution exceed the 60 FPS threshold.

At 2560x1440, performance drops noticeably. Low settings average 85 FPS. Medium settings average 69 FPS, with a minimum of 59 FPS and maximum of 80 FPS. High settings fall to 53 FPS on average, and Ultra settings drop further to 40 FPS. Only Low and Medium presets maintain an average above 60 FPS, though the Medium minimum of 59 FPS shows it can dip just below the threshold.

At 3840x2160, the GPU is clearly overtaxed. Low settings average 47 FPS. Medium settings average 38 FPS, with a minimum of 33 FPS and maximum of 44 FPS. High settings average 30 FPS, and Ultra settings average just 22 FPS. No preset comes close to the 60 FPS playable threshold, confirming that 4K is not a viable option for this combo.

The Verdict

The data provides a clear verdict on whether this PC can run Palworld. At 1920x1080, the system is fully playable across all tested settings, with the best playable preset being Ultra at an average of 61 FPS. All four presets — Low, Medium, High, and Ultra — clear the 60 FPS threshold, making 1080p the sweet spot for this combination.

At 2560x1440, the system remains playable but with restrictions. The playable settings are Low and Medium, with the best being Medium at 69 FPS on average. High and Ultra settings fall below the 60 FPS threshold, so users must compromise on visual quality to maintain smooth gameplay.

At 3840x2160, the system is not playable by the 60 FPS standard. There are no playable settings listed in the verdict, and even the lowest preset only achieves 47 FPS on average. The conclusion is straightforward: this combo handles Palworld well at 1080p, adequately at 1440p with lowered settings, and not at all at 4K.

CPU and GPU Roles

The performance scaling across resolutions and presets reveals distinct roles for each component. The AMD Ryzen 9 9900X, with its 12 cores and 24 threads and a 92nd percentile CPU ranking, is far more powerful than what Palworld requires. The GPU, Intel Arc B570, sits at the 65th percentile and is the limiting factor.

At 1920x1080, the CPU has minimal impact on performance. The framerate scaling from Low (130 FPS) to Ultra (61 FPS) is a direct result of GPU load increasing with graphical settings. The CPU's strength is evident in the consistently high minimum framerates, such as the 89 FPS minimum at Medium settings, indicating it can feed the GPU without bottlenecking.

At 2560x1440, the GPU's role becomes more pronounced. The drop from 85 FPS at Low to 40 FPS at Ultra shows the GPU struggling with increased pixel count and shading complexity. The CPU's influence diminishes further, as the framerates are dictated almost entirely by the GPU's rendering throughput.

At 3840x2160, the GPU is completely overwhelmed. The 47 FPS at Low settings and 22 FPS at Ultra demonstrate a severe GPU bottleneck. The CPU's capabilities are largely irrelevant at this resolution, as the GPU cannot process frames fast enough to utilize the CPU's available headroom. The data implies that for Palworld, upgrading the GPU would yield far greater performance gains than upgrading the CPU, especially at higher resolutions.