Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 19 | 25 | 31 |
| 1440p QHD | 26 | 35 | 45 | 56 |
| 1080p Full HD | 40 | 53 | 68 | 84 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The AMD Ryzen 9 9900X paired with the Intel Arc B390 presents an unusual combination for Palworld, a survival title that demands steady frame delivery. The recorded data shows a system where the CPU is a top-tier part but the graphics solution is severely limited, resulting in a narrow range of playable configurations.
Measured FPS Breakdown
At 3840x2160, the combination struggles to maintain any semblance of smooth gameplay. The High preset delivers an average of 19 FPS, which falls far below the playable threshold. Dropping to Medium improves the average to 25 FPS, with minimum and maximum readings of 21 and 29 FPS respectively, but this remains a stutter-heavy experience. The Low preset pushes the average up to 31 FPS, yet even this best-case 4K scenario fails to approach 60 FPS. The Ultra preset is the worst performer at this resolution, averaging only 15 FPS, which is effectively a slideshow during intense moments.
Moving to 2560x1440 shows meaningful gains but still leaves the system short of playable status. The High preset reaches an average of 35 FPS, while Medium climbs to 45 FPS, with recorded minimums of 38 and maximums of 52 FPS. Low settings at this resolution produce an average of 56 FPS, tantalizingly close to the 60 FPS target but still missing it. Ultra remains weak at 26 FPS average. The data indicates that even the least demanding settings at 1440p cannot deliver consistent frame rates above the playability line.
The 1920x1080 results finally reveal a usable range of settings. At High, the average FPS is 53, which is playable in a loose sense but below the 60 FPS benchmark used in this database. Medium settings achieve an average of 68 FPS, with minimum and maximum readings of 58 and 79 FPS, clearing the threshold with some headroom. Low settings perform best overall at 84 FPS average. Ultra at 1080p drops to 40 FPS, which is the outlier among the otherwise improved results.
FAQ
Q: Can this PC run Palworld at 4K resolution?
A: No. The recorded data shows no playable settings at 3840x2160. The best average FPS at this resolution is 31 FPS on Low settings, which is far below the 60 FPS playable threshold. All other presets at 4K range from 15 to 25 FPS.
Q: What is the best playable setting at 1920x1080?
A: The Medium preset is the most demanding setting that stays at or above 60 FPS. It achieves an average of 68 FPS, with minimums of 58 and maximums of 79 FPS. The Low preset is also playable at 84 FPS, but Medium offers higher visual quality while still clearing the threshold.
Q: Is 1440p playable with this hardware?
A: No. The verdict data lists no playable settings for 2560x1440. Even the Low preset, which produces the highest average at this resolution (56 FPS), falls short of the 60 FPS target. Medium and High presets average 45 and 35 FPS respectively.
Q: How much performance is lost when moving from 1080p Medium to 1440p Medium?
A: The average FPS drops from 68 at 1920x1080 to 45 at 2560x1440, a reduction of 23 FPS. This represents a significant 33.8% decrease in average frame rate when scaling up the resolution by roughly 1.78 times the pixel count.
Q: Does the Ultra preset ever reach playable frame rates?
A: No. Across all three resolutions, the Ultra preset averages 15 FPS at 4K, 26 FPS at 1440p, and 40 FPS at 1080p. None of these values approach the 60 FPS playable threshold, making Ultra settings unusable for this game with this hardware combination.
Q: What is the performance gap between the best and worst presets at 1080p?
A: The Low preset averages 84 FPS while Ultra averages 40 FPS, a difference of 44 FPS. The Medium preset sits between them at 68 FPS, which is the recommended choice for balancing visual quality with frame rate.
Similar Performance Alternatives
The CPU in this system is a high-end part, ranking in the 92nd percentile among all CPUs in the database. Its nearest rivals include the AMD EPYC 9015, which scores 0.1% lower, and the AMD EPYC 7313, which scores 0.2% higher. The Intel Core i9-14900 is 1.1% ahead, and the Intel Xeon Platinum 8260M leads by 1.4%. These differences are negligible in real-world gaming, so any of these processors would deliver nearly identical CPU-bound performance in Palworld.
The GPU tells a very different story. The Intel Arc B390 sits in the 9th percentile among all GPUs, with its only benchmark score being 1482 in 3DMark Steel Nomad DX12. Its nearest rivals are all older NVIDIA parts: the GeForce GT 520MX scores 1.3% higher, the GeForce 800M is 1.5% ahead, the GeForce GT 625 OEM leads by 2.5%, and the GeForce GT 710 is 2.7% faster. These are entry-level and legacy graphics solutions, and the data suggests the Arc B390 performs in the same tier as them, which explains why Palworld runs so poorly at higher resolutions and presets.
For a system looking to improve Palworld performance, the CPU is not the bottleneck. Swapping the Ryzen 9 9900X for any of its nearest rivals would change nothing meaningful in terms of frame rates. The limiting factor is entirely the GPU, and users would need to consider a substantially faster graphics card to unlock higher settings or resolutions. The current GPU's performance class is closer to integrated graphics from a decade ago than to modern discrete solutions.
The Verdict
The data is unambiguous about this system's capabilities in Palworld. At 3840x2160, there are no playable settings. Every preset, from Low to Ultra, produces average FPS values between 15 and 31, all far below the 60 FPS threshold. At 2560x1440, the situation improves but remains unplayable, with the best average being 56 FPS on Low settings, just missing the target.
The only resolution where this PC can run Palworld at or above 60 FPS is 1920x1080. The verdict data confirms that Low and Medium presets are playable at this resolution. The Medium preset is the recommended choice since it achieves an average of 68 FPS, providing a comfortable margin above the 60 FPS line while offering better visual fidelity than Low. The High preset at 53 FPS and Ultra at 40 FPS are not playable according to the database's criteria.
In practical terms, this system can run Palworld, but only at 1080p with modest settings. Players who prioritize frame rate over visuals should select Medium settings, which deliver an average of 68 FPS with minimums that stay near 58 FPS. The experience will be smooth in most scenarios, though occasional dips close to the minimum could cause minor hitches. For anyone expecting 1440p or 4K gameplay, this combination is not viable for Palworld.
CPU and GPU Roles
The division of labor between the AMD Ryzen 9 9900X and the Intel Arc B390 in Palworld is heavily skewed toward the GPU. The CPU is a 12-core, 24-thread processor with a Cinebench R23 multi-core score of 32172 and a single-core score of 2253, placing it in the 92nd percentile of all CPUs. It has more than enough processing headroom for this game, and its performance relative to rivals like the Intel Core i9-14900 (1.1% faster) shows that CPU choice is irrelevant here.
The GPU, conversely, is the limiting factor at every resolution. The data shows that scaling from 1920x1080 to 2560x1440 with the Medium preset reduces the average FPS from 68 to 45, a drop of 33.8%. Moving from 1440p Medium to 4K Medium further reduces the average from 45 to 25 FPS, another 44.4% decrease. These steep drops indicate that the graphics solution is saturated even at moderate resolutions, and the system is entirely GPU-bound.
The scaling between presets reinforces this conclusion. At 1080p, the difference between Low and Ultra is 44 FPS (84 to 40), which is a massive swing driven entirely by GPU workload. At 1440p, the same preset range spans from 56 to 26 FPS, a 30 FPS gap. At 4K, it narrows to 16 FPS (31 to 15), suggesting that the GPU is so overwhelmed at this resolution that even reducing settings yields diminishing returns.
The CPU's role becomes more apparent if the GPU were upgraded, but with the Arc B390, the processor never becomes the bottleneck. The recorded data shows that this is a GPU-limited scenario across all tested configurations. The Ryzen 9 9900X is effectively idle in terms of gaming performance, contributing nothing to frame rates that a much cheaper CPU could not match.
Best Settings per Resolution
At 3840x2160, there is no best setting because no preset achieves playable performance. The highest average FPS is 31 on Low, but this is still below the 60 FPS threshold, so the database records no recommended configuration for this resolution.
At 2560x1440, the same situation applies. The Low preset reaches 56 FPS, which is the closest any setting comes to the target, but since it does not clear 60 FPS, there is no playable option. Medium averages 45 FPS, High averages 35 FPS, and Ultra averages 26 FPS, all unusable.
At 1920x1080, the Medium preset is the most demanding setting that stays at or above 60 FPS. It delivers an average of 68 FPS, with minimums of 58 and maximums of 79 FPS. This provides a solid experience with a reasonable safety margin above the playability line. The Low preset is also playable at 84 FPS, but Medium offers better visual quality without sacrificing the frame rate target. High and Ultra presets are not recommended, as they drop to 53 and 40 FPS respectively.
How This Combo Ranks
Among all tested combinations in the database for Palworld, this pairing of AMD Ryzen 9 9900X and Intel Arc B390 ranks 3297 out of 3711 combinations. This places it in the bottom 11.2% of all tested systems, a position that reflects the GPU's severe performance limitations rather than the CPU's capabilities.
The rank is notable because the CPU alone would place this system in the top tier of processors, but the GPU drags the overall gaming performance down dramatically. The Arc B390's 9th percentile standing among all GPUs, combined with its benchmark score of 1482 in 3DMark Steel Nomad DX12, explains why this combination sits so low in the rankings.
For context, the CPU's nearest rivals (AMD EPYC 9015, EPYC 7313, Intel Core i9-14900, Intel Xeon Platinum 8260M) all score within 1.4% of the Ryzen 9 9900X in average benchmarks. None of these processors would meaningfully change the Palworld ranking if swapped in. The GPU's nearest rivals, such as the NVIDIA GeForce GT 710 and GT 625 OEM, are similarly close in performance, but they are all legacy parts from a different era, underscoring how far behind the Arc B390 is relative to modern gaming expectations.
The data suggests that this system is fundamentally mismatched: a premium CPU paired with a GPU that cannot deliver playable frame rates at common gaming resolutions. The 3297th rank out of 3711 combinations reflects this reality, and users seeking better Palworld performance would need to prioritize a GPU upgrade above all else.