Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

83%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
61 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
40 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
22 FPS
12.3ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 53,288
Graphics Card
Required 27,862
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 30 38 47
1440p QHD 40 53 69 85
1080p Full HD 61 81 105 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 81
1920x1080 Low 130
1920x1080 Medium 105
1920x1080 Ultra 61
2560x1440 High 53
2560x1440 Low 85
2560x1440 Medium 69
2560x1440 Ultra 40
3840x2160 High 30
3840x2160 Low 47
3840x2160 Medium 38
3840x2160 Ultra 22

Performance Analysis: Palworld on Your System

The AMD Ryzen 9 7900X and Intel Arc B570 combination delivers a clear, resolution-dependent performance story in Palworld. At 1080p, the pairing is fully capable across all settings, while 1440p requires dropping to Medium for a smooth experience, and 4K remains out of reach for playable frame rates. The data shows a system that scales predictably with graphical load, with the CPU providing ample headroom and the GPU acting as the primary constraint at higher resolutions.

Similar Performance Alternatives

Benchmark data places the AMD Ryzen 9 7900X in the 91st percentile among all CPUs, with an average benchmark score of 53,288. Its nearest rivals in synthetic testing include the AMD EPYC 7313P, which scores 53,206 (0.2% lower), and the Intel Xeon Phi 7290 at 53,469 (0.3% higher). The Intel Xeon 634 trails by 0.6% with a score of 52,974, while the Intel Core i7-14700F leads by 0.6% at 53,620. In practical terms, any of these processors would deliver nearly identical frame rates in Palworld, as the game's CPU demands are modest relative to what this class of processor provides.

For the Intel Arc B570, the GPU sits in the 65th percentile among all GPUs with an average benchmark score of 20,556. Its closest competitors are the NVIDIA GeForce RTX 3070 Mobile (20,534, 0.1% lower), the Intel Arc A750 (20,582, 0.1% higher), the NVIDIA Quadro M4000M (20,480, 0.4% lower), and the AMD Radeon R9 M390X (20,662, 0.5% higher). In Palworld specifically, these GPUs would produce similar frame rates, though the desktop-oriented Arc A750 is the most direct comparison given its architectural lineage. The B570's 10 GB GDDR6 memory and 380.0 GB/s bandwidth are sufficient for the game's asset streaming demands at 1080p and 1440p, but the card's 11.52 TFLOPS FP32 throughput becomes the limiting factor as resolution increases.

CPU and GPU Roles

The benchmark results indicate that the Intel Arc B570 is the dominant performance factor in this pairing, with the Ryzen 9 7900X providing substantial headroom that goes unused. At 1920x1080, moving from Low to Ultra settings drops average FPS from 130 to 61, a reduction of 69 frames that corresponds directly to GPU workload. The CPU's 12 cores and 24 threads, along with its 64 MB shared L3 cache, are never stressed by Palworld's simulation and rendering tasks at this resolution.

Scaling to 2560x1440 reveals a similar pattern with tighter margins. Low settings yield 85 FPS average, Medium drops to 69 FPS, High falls to 53 FPS, and Ultra bottoms out at 40 FPS. The gap between Low and Ultra widens to 45 frames, confirming that pixel count and shader complexity are the primary cost drivers. At 3840x2160, the GPU's limitations become stark: Low averages 47 FPS, Medium 38 FPS, High 30 FPS, and Ultra only 22 FPS. The CPU contribution remains constant across these scenarios, as evidenced by the fact that even at 4K Ultra, the frame rate is limited by rasterization throughput rather than processor speed.

The data shows no meaningful CPU bottleneck at any settings combination. Even the most demanding 4K Ultra preset, which averages 22 FPS, would not improve with a faster processor; the Arc B570's shading units and memory subsystem are the binding constraints. Conversely, the Ryzen 9 7900X's single-thread performance (3dmark single-thread score of 1,093) and multi-thread capability (cinebench r23 multicore of 29,300) suggest it could drive higher frame rates if paired with a more powerful GPU.

Measured FPS Breakdown

At 1920x1080, the measured frame rates show a clear progression across presets. Low settings average 130 FPS, making it the fastest configuration tested. Medium averages 105 FPS, with minimum and maximum readings of 89 and 121 FPS respectively. High averages 81 FPS, while Ultra drops to 61 FPS average. All four presets at 1080p exceed the 60 FPS playable threshold, including Ultra, which just barely clears it.

The 2560x1440 results tighten the margins. Low averages 85 FPS, Medium averages 69 FPS with a minimum of 59 and maximum of 80, High averages 53 FPS, and Ultra averages 40 FPS. Only Low and Medium maintain average frame rates at or above 60 FPS, though Medium's minimum of 59 FPS indicates occasional dips below the threshold.

At 3840x2160, no preset achieves playable performance. Low averages 47 FPS, Medium averages 38 FPS with a minimum of 33 and maximum of 44, High averages 30 FPS, and Ultra averages 22 FPS. The frame time consistency at 4K is poor, as indicated by the Medium preset's 11 FPS spread between minimum and maximum, suggesting that the GPU is operating at its limits.

The frame rate deltas between resolutions are consistent. At Medium settings, 1080p produces 105 FPS, 1440p produces 69 FPS (a 34% reduction), and 4K produces 38 FPS (a further 45% reduction). At High settings, the progression is 81, 53, and 30 FPS respectively. This scaling pattern confirms that the Arc B570's 160-bit memory bus and 10 GB frame buffer become increasingly insufficient as pixel counts rise.

FAQ

Q: Can this system run Palworld at 1080p with Ultra settings?

A: Yes. The measured average FPS at 1920x1080 with Ultra settings is 61 FPS, which exceeds the 60 FPS playable threshold. The minimum FPS data is not available for this preset, but the average indicates playable performance.

Q: What is the best playable preset at 1440p?

A: Medium settings provide the highest playable frame rate at 2560x1440, averaging 69 FPS. While Low averages 85 FPS, Medium offers better visual quality while still clearing the 60 FPS threshold. High and Ultra settings fall below playable levels at 53 and 40 FPS respectively.

Q: Is 4K gaming possible with this hardware?

A: No. All four presets at 3840x2160 fail to reach 60 FPS average. The best result is Low settings at 47 FPS, followed by Medium at 38 FPS, High at 30 FPS, and Ultra at 22 FPS. None of these configurations meet the playable threshold.

Q: How does this GPU compare to its nearest rivals in synthetic benchmarks?

A: The Intel Arc B570 scores 20,556 on average benchmarks, placing it 0.1% above the NVIDIA GeForce RTX 3070 Mobile (20,534) and 0.1% below the Intel Arc A750 (20,582). It outperforms the NVIDIA Quadro M4000M by 0.4% and trails the AMD Radeon R9 M390X by 0.5%.

Q: Does the CPU bottleneck the GPU in Palworld?

A: No. The Ryzen 9 7900X's benchmark scores, including a 91st percentile ranking and 29,300 cinebench r23 multicore score, far exceed what Palworld requires. The frame rate scaling across resolutions and presets follows GPU workload patterns, indicating the Arc B570 is the limiting component.

Q: What frame rate consistency can I expect at 1080p Medium?

A: The measured data shows an average of 105 FPS with a minimum of 89 FPS and maximum of 121 FPS. This 32 FPS spread indicates generally stable performance, with occasional dips that remain well above the 60 FPS threshold.

Best Settings per Resolution

At 1920x1080, the most demanding preset that maintains at least 60 FPS average is Ultra, which achieves 61 FPS. This is notably the only resolution where Ultra settings are playable. The progression from Low at 130 FPS through Medium at 105 FPS and High at 81 FPS shows that users can prioritize visual fidelity without sacrificing smoothness at this resolution.

For 2560x1440, the best playable preset is Medium, averaging 69 FPS. This represents the optimal balance between visual quality and performance, as Low (85 FPS) and Medium (69 FPS) are the only presets above the threshold. The minimum FPS at Medium is 59, meaning brief dips below 60 FPS can occur, but the average remains comfortable.

At 3840x2160, no preset qualifies as playable. The highest average FPS is 47 at Low settings, which falls short of the 60 FPS threshold. Users seeking 4K performance would need to consider lower resolutions or different hardware, as even the least demanding settings cannot sustain playable frame rates.

How This Combo Ranks

This CPU-GPU combination ranks 2,985 out of 3,711 tested combos for Palworld, placing it in the bottom 20% of all configurations. This ranking reflects the Arc B570's position as a mid-range GPU that struggles with this game's demanding rendering at higher resolutions. The Ryzen 9 7900X's strong CPU performance does not compensate for the GPU's limitations, as Palworld's frame rates are primarily determined by graphics throughput.

The ranking also suggests that many other GPU pairings with this CPU would deliver better results. The GPU's 65th percentile among all GPUs, combined with its nearest rivals being mobile or older workstation parts, indicates that the B570 is not positioned for high-end gaming. The 2,985th rank out of 3,711 combos puts this system in the lower quartile, meaning most tested configurations achieve higher frame rates in Palworld.

The Verdict

This system can run Palworld at playable frame rates, but only at specific resolutions and settings. At 1920x1080, all four presets—Low, Medium, High, and Ultra—achieve average FPS above 60, with Ultra at 61 FPS being the most demanding playable configuration. At 2560x1440, only Low (85 FPS) and Medium (69 FPS) clear the threshold, with Medium representing the best visual quality available at playable performance.

At 3840x2160, the verdict is clear: this combination cannot deliver playable frame rates at any preset. The best result is 47 FPS at Low settings, which falls well short of the 60 FPS requirement. The data indicates that the Intel Arc B570 is the limiting factor, as the Ryzen 9 7900X provides ample computational headroom that Palworld does not utilize.

For users targeting 1080p gaming, this system is fully capable, offering Ultra settings at 61 FPS with headroom for higher refresh rates at lower presets. At 1440p, Medium settings provide a playable experience with occasional dips to 59 FPS, making it a viable but less comfortable option. The system's overall ranking of 2,985 out of 3,711 combos reflects these limitations, positioning it as a solid 1080p machine that struggles beyond that resolution.