Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

52%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
84 FPS
Ultra 1080p Measured
40 FPS

1440p (2K / QHD)

Low 1440p Measured
56 FPS
Ultra 1440p Measured
26 FPS

4K (Ultra HD)

Low 4K Measured
31 FPS
Ultra 4K Measured
15 FPS
18.9ms Frame Time
28ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 53,288
Graphics Card
Required 27,862
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 15 19 25 31
1440p QHD 26 35 45 56
1080p Full HD 40 53 68 84

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 53
1920x1080 Low 84
1920x1080 Medium 68
1920x1080 Ultra 40
2560x1440 High 35
2560x1440 Low 56
2560x1440 Medium 45
2560x1440 Ultra 26
3840x2160 High 19
3840x2160 Low 31
3840x2160 Medium 25
3840x2160 Ultra 15

Performance Analysis: Palworld on Your System

Measured FPS Breakdown

The recorded data for Palworld on this AMD Ryzen 9 7900X with Intel Arc B390 combination covers three resolutions and four quality presets. At 3840x2160, the results are consistently below the 60 FPS threshold. Low settings produce an average of 31 FPS, while Medium drops to 25 FPS with a minimum of 21 FPS and a maximum of 29 FPS. High settings average 19 FPS, and Ultra falls to 15 FPS. No preset at 4K reaches even half of the playable threshold.

Moving to 2560x1440, the picture improves but remains marginal. Low settings deliver an average of 56 FPS, just four frames short of the 60 FPS target. Medium averages 45 FPS, with a recorded range of 38 to 52 FPS. High settings drop to 35 FPS, and Ultra averages 26 FPS. None of these preset averages cross the 60 FPS line, meaning the system cannot maintain smooth gameplay at this resolution regardless of quality settings.

At 1920x1080, the combination finally finds playable territory. Low settings average 84 FPS, which is well above the threshold. Medium settings average 68 FPS, with a minimum of 58 FPS and a maximum of 79 FPS. High settings fall to 53 FPS, and Ultra averages 40 FPS. The gap between Medium and High is substantial: a 15 FPS drop, which indicates a steep scaling cost for the higher preset. The data shows that 1080p is the only resolution where this hardware can consistently hold 60 FPS or better, and only on Low or Medium presets.

CPU and GPU Roles

The benchmark results indicate that the Intel Arc B390 is the limiting component in this pairing. The Ryzen 9 7900X is a 12-core, 24-thread processor with a boost clock of 5.60 GHz, and its benchmark scores place it in the 91st percentile among all CPUs. The GPU, by contrast, sits in the 9th percentile among all GPUs, with an average benchmark score of 1482. The disparity is enormous, and the FPS data reflects it.

Resolution scaling tells the story clearly. Going from 1920x1080 to 2560x1440 at Low settings, the average FPS falls from 84 to 56, a 33% reduction. From 2560x1440 to 3840x2160 at Low, the average drops from 56 to 31, a 45% reduction. These steep declines indicate that the GPU is saturated well before the CPU can become a bottleneck. At 1080p High, the average is 53 FPS; at 1440p High, it is 35 FPS; at 4K High, it is 19 FPS. The consistent halving of performance with each resolution step is characteristic of a graphics-bound scenario.

Preset scaling reinforces this interpretation. At 1080p, moving from Low to Medium costs 16 FPS (84 to 68), and moving from Medium to High costs another 15 FPS (68 to 53). The CPU has ample headroom in all of these cases, as its single-thread performance, a 3dmark single-thread score of 1093, is more than sufficient for a survival game like Palworld. The GPU's raw compute, 7.680 TFLOPS FP32 with 1536 shading units, is simply not enough to drive higher settings without significant frame rate losses. At 4K, even the lowest preset fails to reach 32 FPS, which confirms that the Arc B390 is the decisive factor at every resolution tested.

Best Settings per Resolution

At 3840x2160, the verdict is unambiguous: no preset achieves 60 FPS. The best recorded average is 31 FPS on Low settings, and the database lists no playable settings for this resolution. Users targeting 4K would need to accept frame rates far below the playable threshold, or reduce resolution entirely.

At 2560x1440, the same conclusion applies. Low settings produce 56 FPS, which is the closest any preset comes to the target, but it still misses by 4 FPS. The database records no playable settings at this resolution. The most demanding preset that stays at or above 60 FPS does not exist here.

At 1920x1080, the situation changes. Low settings average 84 FPS, and Medium settings average 68 FPS. The most demanding preset that stays at or above 60 FPS is Medium, with an average of 68 FPS and a minimum of 58 FPS. That minimum does dip slightly below the threshold, but the average comfortably clears it. High settings at 53 FPS are not playable by the 60 FPS standard. Therefore, the recommended configuration for this system is 1080p with Medium quality.

The Verdict

The question is whether this PC can run Palworld, and the answer depends entirely on resolution. At 1920x1080, the system can run the game with Low or Medium presets, both averaging above 60 FPS. Medium is the best playable setting, with an average of 68 FPS. Low is even smoother at 84 FPS. High and Ultra are not playable at this resolution, averaging 53 and 40 FPS respectively.

At 2560x1440, the system cannot run the game at 60 FPS on any preset. The closest result is Low at 56 FPS, which falls short. At 3840x2160, the situation is worse, with all presets averaging between 15 and 31 FPS. The database's playable threshold is 60 FPS, and the verdict by resolution confirms this: only 1080p has playable settings, and only Low and Medium qualify. For anyone using this combination, 1080p Medium is the ceiling for a smooth experience.

Similar Performance Alternatives

The CPU's nearest rivals in the database provide context for its performance. The AMD EPYC 7313P has an average score of 53206, which is 0.2% lower than the Ryzen 9 7900X. The Intel Xeon Phi 7290 scores 53469, a 0.3% deficit. The Intel Xeon 634 scores 52974, a 0.6% difference, and the Intel Core i7-14700F scores 53620, which is 0.6% higher. All four alternatives sit within a narrow band of the 7900X, meaning any of them would behave nearly identically in CPU-bound scenarios. In a game like Palworld, where the GPU is the limiting factor, swapping to any of these CPUs would produce almost no change in measured FPS.

The GPU's nearest rivals are far more relevant. The Intel Arc B390 has an average score of 1482. The NVIDIA GeForce GT 520MX scores 1463, which is 1.3% lower. The NVIDIA GeForce 800M scores 1460, a 1.5% deficit. The NVIDIA GeForce GT 625 OEM scores 1446, a 2.5% difference, and the NVIDIA GeForce GT 710 scores 1443, 2.7% lower. These are all extremely weak graphics parts, and the performance deltas are small. A user with any of these GPUs paired with the Ryzen 9 7900X would see nearly identical Palworld frame rates, all constrained by the same graphics bottleneck. The Arc B390 is the strongest of this group, but only by a small margin.

How This Combo Ranks

In the database's full set of tested combinations, this pairing ranks 3297 out of 3711. That places it in the bottom 11% of all tested combos. The ranking reflects the severe imbalance between the CPU and GPU: the processor is in the 91st percentile, while the graphics card is in the 9th percentile. The overall result is dragged down by the GPU's inability to translate the CPU's strength into playable frame rates at higher resolutions. The rank is consistent with the measured FPS data, which shows playable performance only at 1080p on lower presets.

FAQ

Q: Can this PC run Palworld at 60 FPS on 4K?

A: No. At 3840x2160, the highest average FPS recorded is 31 on Low settings. Ultra averages 15 FPS, High averages 19 FPS, and Medium averages 25 FPS.

Q: What is the best playable setting at 1080p?

A: Medium is the most demanding preset that stays at or above 60 FPS, with an average of 68 FPS. Low averages 84 FPS, and High drops to 53 FPS.

Q: Why is the performance so much better at 1080p than at 1440p?

A: The GPU is the bottleneck. At Low settings, the average FPS drops from 84 at 1080p to 56 at 1440p, a 33% reduction. The Arc B390 has limited compute resources, 7.680 TFLOPS FP32, which are quickly saturated as resolution increases.

Q: Is the Ryzen 9 7900X strong enough for this game?

A: Yes. The CPU is in the 91st percentile among all tested CPUs, with a Cinebench R23 multicore score of 29300 and a single-core score of 2016.5. The frame rates are limited by the GPU, not the processor.

Q: What graphics cards perform similarly to the Intel Arc B390?

A: The NVIDIA GeForce GT 520MX is 1.3% slower, the NVIDIA GeForce 800M is 1.5% slower, the NVIDIA GeForce GT 625 OEM is 2.5% slower, and the NVIDIA GeForce GT 710 is 2.7% slower. All would produce nearly the same frame rates in Palworld.

Q: What resolution should I use for a smooth experience?

A: 1920x1080 with Medium settings is the best playable configuration, averaging 68 FPS. At 2560x1440, no preset reaches 60 FPS; Low averages 56 FPS, which is the closest result.