Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 19 | 25 | 31 |
| 1440p QHD | 26 | 35 | 45 | 56 |
| 1080p Full HD | 40 | 53 | 68 | 84 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The AMD Ryzen 5 8400F and Intel Arc B390 combination presents a highly constrained experience in Palworld. The recorded data indicates that this pairing is only viable for consistent 60 FPS gameplay at 1920x1080 with lower graphical presets. Across higher resolutions, the system falls significantly short of the playability threshold, with performance metrics that place it in the lower percentile of all tested hardware configurations.
Measured FPS Breakdown
At 1920x1080, the benchmark results show a clear ceiling for this hardware. With Low settings, the average frame rate reaches 84 FPS, which is the only preset to provide substantial headroom above the 60 FPS playability mark. Moving to Medium settings, the average drops to 68 FPS, with recorded minimums of 58 FPS and maximums of 79 FPS. This indicates that while the average is playable, frame times can dip slightly below the threshold during demanding scenes. High settings at 1080p yield an average of 53 FPS, which is below the playable threshold, and Ultra settings further reduce the average to 40 FPS.
At 2560x1440, performance degrades significantly across all presets. Low settings produce an average of 56 FPS, narrowly missing the 60 FPS target. Medium settings average 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS. High settings drop to 35 FPS average, and Ultra settings produce only 26 FPS average. None of these presets achieve the playable threshold, making 1440p unsuitable for smooth gameplay with this combination.
At 3840x2160, the results are uniformly below playable levels. Low settings average 31 FPS, Medium averages 25 FPS with a minimum of 21 FPS and maximum of 29 FPS, High averages 19 FPS, and Ultra averages 15 FPS. The gap between Low and Ultra at 4K is 16 FPS, reflecting the heavy toll that higher presets take on this hardware at this resolution.
Similar Performance Alternatives
The CPU and GPU each have distinct nearby competitors according to the database. For the AMD Ryzen 5 8400F, the closest alternative is the AMD Ryzen 5 7500F, which scores 24964 in the aggregate benchmark, a mere 0.2% difference. The Intel Core i7-11850H is 0.3% ahead, and the Intel Core i7-13620H is 0.4% ahead. On the opposite side, the AMD EPYC 9474F trails by 0.4%. These figures indicate that the Ryzen 5 8400F sits in a tightly clustered performance band, with no significant deviation from its nearest rivals.
For the Intel Arc B390, the nearest rivals are all legacy NVIDIA parts. The NVIDIA GeForce GT 520MX is 1.3% ahead in the aggregate score, the GeForce 800M is 1.5% ahead, the GeForce GT 625 OEM is 2.5% ahead, and the GeForce GT 710 is 2.7% ahead. The Arc B390's aggregate score of 1482 places it just below these older parts. This positioning is notable because the Arc B390 is a modern integrated graphics solution, yet its recorded performance aligns more closely with entry-level discrete GPUs from over a decade ago. The data suggests that users familiar with the performance of those older NVIDIA parts would see similar behavior in Palworld, which is to say, marginal playability only at the lowest settings and resolutions.
CPU and GPU Roles
The scaling between resolutions and presets reveals which component dominates the performance equation. At 1920x1080, the jump from Low to Medium reduces the average FPS from 84 to 68, a 16 FPS drop. From Medium to High, the average falls another 15 FPS to 53. From High to Ultra, the average drops 13 FPS to 40. This consistent reduction across presets suggests that at 1080p, the GPU is the primary bottleneck, as each increase in graphical fidelity directly reduces frame output.
At 2560x1440, the pattern shifts. Low settings average 56 FPS, which is 28 FPS lower than the 1080p Low result. The delta between Low and Medium at 1440p is 11 FPS, smaller than the 16 FPS delta seen at 1080p. This compression of the preset scaling indicates that at higher resolutions, the GPU is already saturated, and further increases in settings yield diminishing returns. The CPU, with its six cores and 12 threads, has ample headroom to feed the GPU even at lower resolutions, but the Arc B390 cannot translate that CPU capability into higher frame rates as resolution climbs.
At 3840x2160, the differences between presets shrink further. Low averages 31 FPS, Medium averages 25 FPS, High averages 19 FPS, and Ultra averages 15 FPS. The gap between Low and Ultra is 16 FPS, identical to the 1080p gap, but the absolute values are much lower. This suggests that at 4K, the GPU is the overwhelming constraint, and the CPU's role is largely irrelevant to the final frame rate. The data indicates a system where the processor is capable of handling the game's logic and physics at any resolution, but the integrated graphics solution is the definitive limiting factor.
How This Combo Ranks
The combination of the Ryzen 5 8400F and the Arc B390 ranks 3297 out of 3711 tested combinations in the database for Palworld. This places the system in the bottom 11% of all configurations. The rank reflects the severe mismatch between the CPU's performance tier and the GPU's output. While the processor sits at the 77th percentile among all CPUs, the GPU sits at the 9th percentile among all GPUs. This imbalance means that the system's overall gaming capability is dictated almost entirely by the weaker component. In practical terms, the rank indicates that the vast majority of other tested combinations would deliver higher frame rates in Palworld, including many systems with much older or lower-tier CPUs paired with more capable graphics solutions.
The Verdict
The data shows that this PC can run Palworld, but only under specific conditions. At 1920x1080, the system clears the 60 FPS threshold on Low and Medium presets. Medium is the highest playable setting, with an average of 68 FPS. At 2560x1440, no preset achieves 60 FPS average; the closest is Low at 56 FPS, which still misses the mark. At 3840x2160, all presets are far below playable levels, with the best result being Low at 31 FPS. The verdict by resolution is clear: 1080p is the only viable resolution for this hardware, and even then, users must accept Medium settings as the ceiling. For anyone expecting smooth gameplay at higher resolutions, the benchmark results indicate that this combination is not suitable.
FAQ
Q: What is the highest average FPS this system can achieve in Palworld?
A: The highest recorded average FPS is 84, achieved at 1920x1080 with Low settings.
Q: Can this system run Palworld at 2560x1440 with 60 FPS?
A: No. The best result at 2560x1440 is 56 FPS on Low settings, which is below the 60 FPS playability threshold.
Q: What is the highest preset that maintains an average of at least 60 FPS?
A: Medium settings at 1920x1080, which average 68 FPS, is the highest preset that clears the threshold.
Q: How does the Intel Arc B390 compare to its nearest rivals?
A: The Arc B390 scores 1482 in the aggregate benchmark, trailing the NVIDIA GeForce GT 520MX by 1.3%, the GeForce 800M by 1.5%, the GeForce GT 625 OEM by 2.5%, and the GeForce GT 710 by 2.7%.
Q: What is the FPS range on Medium settings at 1920x1080?
A: The average is 68 FPS, with a minimum of 58 FPS and a maximum of 79 FPS.
Q: How does the Ryzen 5 8400F compare to the Ryzen 5 7500F?
A: The Ryzen 5 8400F has an aggregate score of 25005, which is 0.2% higher than the Ryzen 5 7500F's score of 24964.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium, with an average of 68 FPS. Low settings also remain above the threshold at 84 FPS, but Medium provides the best visual fidelity while still meeting the playability requirement.
At 2560x1440, there is no preset that achieves an average of 60 FPS. The closest option is Low at 56 FPS, which falls short of the threshold. Users targeting 1440p would need to accept sub-60 FPS performance or consider different hardware.
At 3840x2160, no preset comes close to 60 FPS. The best result is Low at 31 FPS, which is less than half of the playability threshold. This resolution is not viable for this combination in Palworld.