Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

46%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
84 FPS
Ultra 1080p Measured
40 FPS

1440p (2K / QHD)

Low 1440p Measured
56 FPS
Ultra 1440p Measured
26 FPS

4K (Ultra HD)

Low 4K Measured
31 FPS
Ultra 4K Measured
15 FPS
18.9ms Frame Time
28ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 32,750
Graphics Card
Required 27,862
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 15 19 25 31
1440p QHD 26 35 45 56
1080p Full HD 40 53 68 84

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 53
1920x1080 Low 84
1920x1080 Medium 68
1920x1080 Ultra 40
2560x1440 High 35
2560x1440 Low 56
2560x1440 Medium 45
2560x1440 Ultra 26
3840x2160 High 19
3840x2160 Low 31
3840x2160 Medium 25
3840x2160 Ultra 15

Performance Analysis: Palworld on Your System

Measured FPS Breakdown

At 3840x2160, this combination is firmly outside playable territory. The recorded data shows an average of 19 FPS on High settings, 31 FPS on Low, 25 FPS on Medium, and 15 FPS on Ultra. The only complete frame window captured at this resolution comes from Medium settings, where the minimum sits at 21 FPS and the maximum at 29 FPS. Every preset at 4K falls well short of the 60 FPS playability threshold, and even the best case, Low at 31 FPS, represents less than half of what is needed for smooth gameplay.

Dropping to 2560x1440 improves things noticeably, but the verdict remains the same. The Low preset delivers an average of 56 FPS, which is tantalizingly close to the 60 FPS target yet still below it. Medium settings average 45 FPS with a recorded range of 38 to 52 FPS. High settings drop to 35 FPS, and Ultra falls to 26 FPS. The gap between Low and High at this resolution is 21 FPS, indicating that graphical settings have a substantial impact on the Arc B390's frame output.

At 1920x1080, the picture changes significantly. Low settings produce an average of 84 FPS, comfortably above the 60 FPS threshold. Medium settings average 68 FPS with a minimum of 58 and a maximum of 79, which means the frame rate occasionally dips just below 60 but mostly holds above it. High settings average 53 FPS, and Ultra drops to 40 FPS. The spread from Low to Ultra here is 44 FPS, the largest of any resolution tested, showing that at 1080p the settings menu has the most leverage over performance.

CPU and GPU Roles

The data indicates that this game, when paired with the Ryzen 5 7400F and Arc B390, is overwhelmingly GPU-bound at higher resolutions. The 3840x2160 results show only a 16 FPS difference between Low and Ultra (31 FPS versus 15 FPS), which is a narrow band of performance. At 2560x1440, the spread widens to 30 FPS (56 FPS versus 26 FPS). At 1920x1080, the spread reaches 44 FPS (84 FPS versus 40 FPS). This scaling pattern is typical of a system where the graphics processor is the limiting factor: as resolution drops, the CPU has more headroom to feed frames, and the GPU's settings sensitivity becomes more apparent.

The Ryzen 5 7400F, with its six cores and twelve threads, is clearly not the bottleneck in this configuration. The CPU sits in the 83rd percentile among all processors in the database, and its Cinebench R23 multi-core score of 21,765 points places it well above the demands of most modern titles. The Arc B390, by contrast, sits in the 9th percentile among all GPUs, and its 3DMark Steel Nomad DX12 score of 1,482 points indicates a very modest graphics processor. The performance ceiling here is set by the GPU at every resolution and preset combination.

The scaling between resolutions confirms this. Moving from 1080p Low to 1440p Low reduces the average from 84 FPS to 56 FPS, a drop of 28 FPS. Moving from 1440p Low to 4K Low reduces it from 56 FPS to 31 FPS, a drop of 25 FPS. These are consistent, large penalties that point directly at the graphics hardware struggling with pixel throughput. The CPU's role is to keep up with the GPU's output, and given the GPU's low performance tier, the 7400F has ample compute in reserve.

At 1080p, the CPU begins to matter slightly more. The jump from 84 FPS on Low to 68 FPS on Medium is 16 FPS, and the drop from Medium to High is another 15 FPS. This suggests that at lower resolutions, where the GPU has less work per frame, the settings are still the dominant factor. There is no resolution or preset in the recorded data where the CPU appears to constrain performance. The AMD processor's single-thread score of 3,072 in Cinebench R23 and its PassMark single-thread score of 3,689 indicate strong per-core performance that is more than sufficient for this title.

FAQ

Q: Can this system run Palworld at 60 FPS on a 4K monitor?

A: No. The best result at 3840x2160 is 31 FPS on Low settings. Medium averages 25 FPS, High averages 19 FPS, and Ultra averages 15 FPS. None of these approach the 60 FPS playability threshold.

Q: What is the highest settings preset that maintains 60 FPS at 1080p?

A: Medium settings average 68 FPS at 1920x1080, with a minimum of 58 FPS and a maximum of 79 FPS. Low settings are also above 60 FPS with an average of 84 FPS. High settings fall short at 53 FPS.

Q: Is the Ryzen 5 7400F or the Intel Arc B390 the limiting factor in this game?

A: The Arc B390 is the limiting factor. The GPU ranks in the 9th percentile among all graphics cards in the database, while the CPU ranks in the 83rd percentile. The frame rate drops substantially as resolution increases, which is characteristic of GPU-bound performance.

Q: How does the Arc B390 compare to its nearest rivals in raw GPU performance?

A: The Arc B390's average benchmark score is 1,482. The NVIDIA GeForce GT 520MX scores 1,463, which is 1.3% lower. The NVIDIA GeForce 800M scores 1,460, 1.5% lower. The NVIDIA GeForce GT 625 OEM scores 1,446, 2.5% lower, and the NVIDIA GeForce GT 710 scores 1,443, 2.7% lower.

Q: What frame rate can I expect at 1440p with Medium settings?

A: The recorded average is 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS. This is below the 60 FPS threshold, so expect noticeable stutter in busy scenes.

Q: Is there any resolution where Ultra settings are playable?

A: No. Ultra settings produce 40 FPS at 1920x1080, 26 FPS at 2560x1440, and 15 FPS at 3840x2160. None of these reach the 60 FPS target.

The Verdict

The recorded data answers the question directly: this PC can run Palworld, but only at 1920x1080 with Low or Medium settings. The verdict table in the database lists Low and Medium as the only playable settings at 1080p, with Medium being the best choice at an average of 68 FPS. At 2560x1440, no settings preset clears the 60 FPS bar. The closest is Low at 56 FPS, which is technically below the threshold and would result in occasional dips. At 3840x2160, the situation is worse: the best average is 31 FPS on Low, and every other preset sits in the 15 to 25 FPS range.

For a practical recommendation: if you own a 1080p monitor, set the game to Medium and accept that frame times will hover near 60 FPS with occasional drops to 58 FPS. If you own a 1440p or 4K display, the data suggests lowering the resolution to 1080p rather than reducing settings, because even Low settings at 1440p do not reach 60 FPS. The Arc B390 is simply not capable of driving this game at higher resolutions, regardless of the Ryzen 5 7400F's ample CPU headroom.

The CPU itself is not the problem. Its benchmark scores, including a Cinebench R23 multi-core result of 21,765 and a PassMark multithread score of 25,645, place it far above what this game requires. The bottleneck is the integrated-class Arc B390, whose 7.680 TFLOPS FP32 throughput and 1,482 Steel Nomad score place it in the lowest tier of the database's GPU rankings.

Similar Performance Alternatives

If you are looking at the CPU side, the Ryzen 5 7400F has close neighbors in the database. The Intel Core i5-14600T averages 32,707 points, just 0.1% behind the 7400F's average of 32,750. The Intel Core Ultra 7 155H scores 32,697, a 0.2% difference. The AMD Ryzen 7 PRO 6850H scores 32,812, which is 0.2% ahead of the 7400F. The AMD Ryzen AI 7 PRO 360 scores 32,662, 0.3% behind. These four processors would all deliver essentially identical CPU-bound performance in Palworld, meaning none of them would change the frame rate picture described above.

On the GPU side, the Arc B390's nearest rivals are all older NVIDIA parts. The GeForce GT 520MX scores 1,463, which is 1.3% lower than the Arc B390's 1,482. The GeForce 800M scores 1,460, 1.5% lower. The GeForce GT 625 OEM scores 1,446, 2.5% lower. The GeForce GT 710 scores 1,443, 2.7% lower. Any of these GPUs would behave almost identically to the Arc B390 in Palworld, meaning the same 1080p Medium ceiling and the same inability to hit 60 FPS at 1440p or 4K.

None of the GPU rivals are upgrades; they are all within 2.7% of the Arc B390's score. If you are considering swapping hardware, the data suggests that only a GPU from a significantly higher performance tier would change the playability verdict. The CPU alternatives listed here would not alter the outcome at all.

How This Combo Ranks

In the database's ranking of tested CPU and GPU combinations for Palworld, this pairing sits at rank 3,297 out of 3,711 total combos. That places it in the bottom 11% of all tested configurations. The rank reflects the GPU's severe limitations: the Arc B390's 9th percentile standing among all GPUs drags the combo down despite the Ryzen 5 7400F's strong 83rd percentile CPU ranking.

The practical implication of this rank is that most other tested systems will outperform this one in Palworld. The combo's measured results, with playable performance only at 1080p Low and Medium, align with its low standing. The CPU contributes positively to the overall benchmark average of 32,750 points, but the GPU's 1,482 average score is the weak link. For Palworld specifically, the frame rate data is the truest measure: 84 FPS at 1080p Low is the ceiling, and everything else falls off from there.

The data does not indicate that this is a broken or defective combination. It is simply a pairing of a strong modern CPU with a very weak graphics solution. The 3,297 rank out of 3,711 is a fair representation of what the recorded FPS numbers show. If you already own this hardware, the path to a better experience is clear: lower the resolution to 1080p, use Medium settings, and accept the 68 FPS average with its 58 FPS minimum. If you are building new, the database's other combinations at higher ranks would offer more headroom for this game.