Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 31 | 46 | 52 |
| 1440p QHD | 44 | 59 | 81 | 94 |
| 1080p Full HD | 67 | 93 | 119 | 145 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The AMD Ryzen 5 5600 paired with the Intel Arc B580 presents a mid-range desktop combination tested against Palworld’s demanding survival gameplay. Measured frame-rate data across three resolutions and four quality presets reveals a system that scales predictably with workload, though its ceiling is firmly defined by the GPU at higher pixel counts. This analysis breaks down the exact performance envelope, component roles, and comparative standing of this combo.
Best Settings per Resolution
At 3840x2160, no preset achieves the 60 FPS playable threshold. The Low preset delivers the highest average frame rate at 52.3 FPS, which is the closest this combination gets to playability at 4K, but it still falls short. The Medium preset averages 45.5 FPS, while High drops to 31 FPS, and Ultra bottoms out at 22.5 FPS. None of these clear the 60 FPS bar, so the best setting at this resolution is effectively the lowest one, purely for maximum fluidity, though it remains below the target.
At 2560x1440, the Medium preset is the most demanding option that stays at or above 60 FPS, averaging 81 FPS. The Low preset runs faster at 94.4 FPS, but Medium provides a better visual balance while still maintaining a comfortable margin above the threshold. The High preset averages 58.9 FPS, which is just under the 60 FPS line, and Ultra drops to 43.5 FPS, making both unsuitable for a locked 60 FPS experience.
At 1920x1080, the Ultra preset is fully playable, averaging 67.4 FPS. This is the most demanding setting that clears the threshold, and it does so with a modest buffer. The High preset averages 92.7 FPS, Medium hits 118.7 FPS, and Low reaches 144.9 FPS, all comfortably above 60 FPS. For 1080p users, cranking everything to Ultra is viable, with only a slight dip below the higher refresh rates offered by lower presets.
CPU and GPU Roles
The data indicates a clear shift in component bottleneck behavior as resolution scales. At 1920x1080, the CPU’s role is more pronounced. The Ryzen 5 5600, with its 6 cores and 12 threads, is capable of high throughput, evidenced by its Cinebench R23 multi-core score of 18309 and single-core score of 2584. This allows the Arc B580 to push frame rates from 67.4 FPS at Ultra to 144.9 FPS at Low, showing that the CPU can feed the GPU adequately at lower pixel counts, where the GPU has headroom.
Moving to 2560x1440, the GPU begins to take a more dominant role. The frame rate drop from 94.4 FPS at Low to 81 FPS at Medium is a 14.2% reduction, while the jump to High at 58.9 FPS is a 27.3% drop from Medium. This steepening decline as settings increase points to the Arc B580’s rendering limits becoming the primary constraint. The CPU is still capable, but the GPU’s fill rate and shader throughput are now the limiting factors.
At 3840x2160, the GPU is the unequivocal bottleneck. The Arc B580’s 13.67 TFLOPS FP32 compute and 456.0 GB/s memory bandwidth are insufficient for the pixel workload. The frame rate plummets from 52.3 FPS at Low to 22.5 FPS at Ultra, a 57% reduction. The CPU’s performance, while consistent, cannot compensate for the GPU’s inability to process the increased pixel count. The 3DMark Steel Nomad DX12 score of 3068 for the GPU reinforces this, as it indicates modest absolute performance that is quickly overwhelmed at 4K.
Measured FPS Breakdown
3840x2160 (4K):
- Low: Average 52.3 FPS. This is the only setting that approaches playability, but it remains below the 60 FPS threshold.
- Medium: Average 45.5 FPS. A significant drop from Low, indicating the GPU struggles with additional shading and texture work.
- High: Average 31 FPS. This preset sees a steep decline, likely due to increased geometry and post-processing effects.
- Ultra: Average 22.5 FPS. The most demanding preset results in a slideshow-like experience, unsuitable for smooth gameplay.
2560x1440 (2K):
- Low: Average 94.4 FPS. Well above the threshold, showing that the GPU has enough headroom at this resolution with minimal settings.
- Medium: Average 81 FPS. The best playable high-fidelity option, offering a 16.9% reduction from Low but still a strong margin above 60 FPS.
- High: Average 58.9 FPS. Just below the playable threshold, making it a marginal choice for those who prefer visuals over a locked frame rate.
- Ultra: Average 43.5 FPS. A substantial drop from High, indicating that Ultra’s added effects are too demanding for the Arc B580 at this resolution.
1920x1080 (1080p):
- Low: Average 144.9 FPS. This is the peak performance point, ideal for high-refresh-rate monitors.
- Medium: Average 118.7 FPS. A solid 18.1% reduction from Low, but still extremely smooth.
- High: Average 92.7 FPS. A further 21.9% drop from Medium, yet remains well above the 60 FPS target.
- Ultra: Average 67.4 FPS. The lowest playable setting, but it still clears the threshold by a 12.3% margin, making it viable for full visual fidelity.
Similar Performance Alternatives
For the AMD Ryzen 5 5600, the nearest rivals in synthetic CPU benchmarks show very close scores. The Intel Core Ultra 7 258V scores 20454, which is a 0.1% delta from the Ryzen’s 20468 average benchmark score. This indicates that in CPU-bound scenarios, swapping to the Ultra 7 258V would yield nearly identical frame rates. Similarly, the AMD Ryzen 5 8500G at 20425 (a 0.2% delta) and the AMD EPYC 9454P at 20422 (a 0.2% delta) are also effectively equivalent for gaming purposes. The AMD EPYC 7713 at 20363 is a 0.5% delta, still a negligible difference. In practice, any of these CPUs would produce the same Palworld performance as the Ryzen 5 5600, assuming the GPU remains the same.
For the Intel Arc B580, the GPU’s nearest rivals in terms of average benchmark score include the AMD Radeon RX 580 2048SP at 23061 (a -0.2% delta, meaning it is effectively identical), the NVIDIA GeForce RTX 2080 at 22895 (a 0.6% delta, slightly lower), the NVIDIA GeForce RTX 3080 at 23172 (a -0.7% delta, slightly higher), and the NVIDIA P106-100 at 23249 (a -1% delta, higher). The RTX 3080 being only a 0.7% faster in aggregate suggests that while it may have more raw compute, the Arc B580’s driver optimizations and architecture keep it competitive in this specific title. The RTX 2080 is a close match, meaning users with that older card would see similar Palworld frame rates.
The Verdict
This PC can run Palworld, but only at specific resolutions and settings. At 1920x1080, the system is fully capable, with all presets clearing the 60 FPS threshold. The Ultra preset averages 67.4 FPS, making it the recommended choice for a balanced experience. At 2560x1440, the system is playable on Low and Medium settings, with Medium being the best option at 81 FPS. The High preset falls short at 58.9 FPS, and Ultra is not viable. At 3840x2160, the system cannot achieve 60 FPS on any preset, with the best effort being Low at 52.3 FPS. The verdict is clear: this combo is a solid 1080p performer and a capable 1440p option with adjusted settings, but it is not a 4K gaming solution for Palworld.
How This Combo Ranks
Among all tested combinations in the benchmark database for Palworld, this specific pairing of the AMD Ryzen 5 5600 and Intel Arc B580 ranks 2843 out of 3711 total combos. This places it in the lower 23.4% of all tested systems, indicating that while it is not a top-tier configuration, it is still ahead of a substantial portion of the field. The ranking reflects the GPU’s mid-range standing (the Arc B580’s percentile versus all GPUs is 68, meaning it is better than 68% of GPUs) and the CPU’s solid but not exceptional position (the Ryzen 5 5600’s percentile versus all CPUs is 74). The combination of a 74th-percentile CPU and a 68th-percentile GPU results in a system that is respectable for 1080p gaming but falls behind higher-end combos that feature stronger GPUs or newer CPUs.
FAQ
Q: Can this system run Palworld at 4K with playable frame rates?
A: No. At 3840x2160, the highest average frame rate is 52.3 FPS on Low settings, which is below the 60 FPS playable threshold. No preset at this resolution clears the threshold.
Q: What is the best setting for 1440p gaming on this combo?
A: The Medium preset at 2560x1440 is the best choice, averaging 81 FPS. It provides a good balance between visual quality and performance, staying well above the 60 FPS target.
Q: How does the Ryzen 5 5600 compare to its nearest CPU rival?
A: The Ryzen 5 5600 has an average benchmark score of 20468, which is only a 0.1% difference from the Intel Core Ultra 7 258V’s score of 20454. This means gaming performance would be nearly identical.
Q: Is the Arc B580 more similar to an RTX 2080 or an RTX 3080?
A: The Arc B580’s average benchmark score is 23021. The RTX 2080 scores 22895, a 0.6% delta, while the RTX 3080 scores 23172, a -0.7% delta. The B580 is nearly equidistant between them, but slightly closer to the RTX 2080 in aggregate performance.
Q: What frame rate can I expect at 1080p with Ultra settings?
A: At 1920x1080 with Ultra settings, the system averages 67.4 FPS. This is above the 60 FPS playable threshold, making Ultra a viable option for 1080p.
Q: Does this combo rank in the top half of all tested systems for Palworld?
A: No, it ranks 2843 out of 3711 combos, placing it in the lower 23.4% of all tested configurations. It is not a top-half performer, but it is still ahead of roughly a quarter of the field.