Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

60%
Playable Your system meets minimum requirements.

Performance

1080p (Full HD)

Low 1080p Measured
130 FPS
Ultra 1080p Measured
61 FPS

1440p (2K / QHD)

Low 1440p Measured
85 FPS
Ultra 1440p Measured
40 FPS

4K (Ultra HD)

Low 4K Measured
47 FPS
Ultra 4K Measured
22 FPS
12.3ms Frame Time
18ms Input Latency
4K Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 19,593
Graphics Card
Required 27,862
Your GPU 20,556

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 22 30 38 47
1440p QHD 40 53 69 85
1080p Full HD 61 81 105 130

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 81
1920x1080 Low 130
1920x1080 Medium 105
1920x1080 Ultra 61
2560x1440 High 53
2560x1440 Low 85
2560x1440 Medium 69
2560x1440 Ultra 40
3840x2160 High 30
3840x2160 Low 47
3840x2160 Medium 38
3840x2160 Ultra 22

Performance Analysis: Palworld on Your System

The AMD Ryzen 5 5500 and Intel Arc B570 form a mid-range desktop combination. The CPU, a 6-core/12-thread Zen 3 part with a 65W TDP, and the GPU, a 10GB GDDR6 Battlemage card, were measured in Palworld across three resolutions and four presets. The launch MSRP for the CPU is $159, and for the GPU it is 219 USD. Benchmark results show this combo ranks 2985 out of 3711 tested configurations.

Similar Performance Alternatives

The nearestRivals data for the CPU places the Ryzen 5 5500 within a narrow band of other processors. The AMD Ryzen AI 5 430 is just 0.1% behind, while the Intel Core i5-12500 trails by 0.4% and the Intel Core i5-11600KF by 0.7%. On the other side, the Intel Core i7-10700F is 0.5% ahead. These delta percentages are small enough to imply that swapping the Ryzen 5 5500 for any of these four CPUs would produce nearly identical frame rates in Palworld. The CPU’s average benchmark score of 19593 and its 73rd percentile among all CPUs reinforce that this processor sits in a well-populated performance tier.

For the GPU, the Intel Arc B570’s nearest rivals are equally close. The NVIDIA GeForce RTX 3070 Mobile is 0.1% ahead, while the Intel Arc A750 is 0.1% behind. The NVIDIA Quadro M4000M is 0.4% ahead and the AMD Radeon R9 M390X is 0.5% behind. With an average benchmark score of 20556 and a 65th percentile, the B570 is effectively interchangeable with these four graphics cards in terms of overall compute performance. In Palworld, the measured FPS differences between these GPUs would be negligible.

Thus, any combination that swaps the Ryzen 5 5500 for a Ryzen AI 5 430, Core i5-12500, Core i7-10700F, or Core i5-11600KF—or swaps the Arc B570 for an RTX 3070 Mobile, Arc A750, Quadro M4000M, or R9 M390X—would behave almost exactly like this tested setup.

CPU and GPU Roles

The measured FPS data across resolutions and presets reveals how the CPU and GPU share the workload in Palworld. At 1920x1080, the lowest resolution tested, the combo delivers 130 FPS on Low, 105 FPS on Medium, 81 FPS on High, and 61 FPS on Ultra. The fact that even Ultra stays above the 60 FPS threshold suggests that neither component is severely bottlenecked at this resolution; the CPU has enough headroom to feed the GPU, and the GPU can handle the visual load.

Moving to 2560x1440, the average FPS drops to 85 on Low, 69 on Medium, 53 on High, and 40 on Ultra. The jump from 1080p to 1440p is substantial: the Low preset loses 45 FPS, and High drops below the playable threshold. This pattern indicates that the GPU becomes the primary limiting factor as resolution increases. The CPU remains the same, so the extra pixel count places a heavier burden on the Arc B570’s 10GB memory and 2304 shading units.

At 3840x2160, the GPU’s dominance is unmistakable. Low averages 47 FPS, Medium 38 FPS, High 30 FPS, and Ultra 22 FPS—none reach 60 FPS. The scaling from 1440p to 4K is even steeper: Low falls from 85 to 47, and Medium from 69 to 38. These numbers show that the Arc B570 is simply not powerful enough for 4K Palworld, regardless of how much CPU headroom remains.

The CPU’s role is most evident at 1080p, where the GPU is less stressed. The Ryzen 5 5500’s 6 cores and 12 threads, paired with its 16MB L3 cache, are sufficient to keep the GPU fed at that resolution. At higher resolutions, the GPU’s fill rate and memory bandwidth become the decisive factors. The data does not isolate CPU utilization directly, but the consistent pattern—GPU-bound at 1440p and 4K, CPU-sufficient at 1080p—is clear from the measured FPS.

Measured FPS Breakdown

The following table lists every measured FPS value from the fact pack. Where min and max values were recorded, they are included; otherwise, only the average is available.

| Resolution | Settings | Avg FPS | Min FPS | Max FPS |

|------------|----------|---------|---------|---------|

| 3840x2160 | High | 30 | — | — |

| 3840x2160 | Low | 47 | — | — |

| 3840x2160 | Medium | 38 | 33 | 44 |

| 3840x2160 | Ultra | 22 | — | — |

| 2560x1440 | High | 53 | — | — |

| 2560x1440 | Low | 85 | — | — |

| 2560x1440 | Medium | 69 | 59 | 80 |

| 2560x1440 | Ultra | 40 | — | — |

| 1920x1080 | High | 81 | — | — |

| 1920x1080 | Low | 130 | — | — |

| 1920x1080 | Medium | 105 | 89 | 121 |

| 1920x1080 | Ultra | 61 | — | — |

At 4K, the only preset with min/max data is Medium, which fluctuates between 33 and 44 FPS. That range is consistently below the 60 FPS target, confirming that no 4K setting is playable. At 1440p, Medium shows a min of 59 FPS—just 1 FPS below the threshold—but the average of 69 FPS indicates it is playable in practice. The 1080p Medium range of 89 to 121 FPS shows a comfortable margin above 60 FPS.

FAQ

Q: Can this combo run Palworld at 4K?

A: No. At 3840x2160, the highest average FPS is 47 on Low settings, and the lowest is 22 on Ultra. None of the four presets reach 60 FPS, so the game is not playable at 4K.

Q: What is the best playable setting at 2560x1440?

A: Medium is the most demanding preset that stays at or above 60 FPS, with an average of 69 FPS. Low also qualifies at 85 FPS, but Medium offers higher visual quality while still clearing the threshold.

Q: Is 1920x1080 fully playable?

A: Yes. All four presets—Low, Medium, High, and Ultra—average above 60 FPS. Ultra averages 61 FPS, just barely above the threshold, while High averages 81 FPS and Medium 105 FPS.

Q: How does this combo rank among all tested configurations?

A: It ranks 2985 out of 3711 tested combos. That places it in the lower portion of the database, meaning most other combinations perform better in Palworld.

Q: Which CPUs are most similar in performance?

A: The nearest rivals are the AMD Ryzen AI 5 430 (0.1% slower), Intel Core i5-12500 (0.4% slower), Intel Core i7-10700F (0.5% faster), and Intel Core i5-11600KF (0.7% slower). Any of these would produce nearly identical FPS.

Q: Which GPUs are most similar?

A: The Intel Arc A750 is 0.1% slower, the NVIDIA GeForce RTX 3070 Mobile is 0.1% faster, the AMD Radeon R9 M390X is 0.5% slower, and the NVIDIA Quadro M4000M is 0.4% faster. These GPUs would yield comparable frame rates.

How This Combo Ranks

The combination of AMD Ryzen 5 5500 and Intel Arc B570 is ranked 2985 out of 3711 tested configurations in Palworld. This places it in the bottom fifth of the database, though the exact percentile is not stated. The rank reflects the measured FPS across all resolutions and presets, with the 4K results dragging the overall score down. At 1080p, the combo is respectable—Ultra at 61 FPS is a solid result—but the inability to handle 4K and the limited playability at 1440p (only Low and Medium) keep it from climbing higher.

The CPU’s 73rd percentile among all CPUs and the GPU’s 65th percentile indicate that both components are mid-pack in isolation. However, Palworld’s demanding rendering at high resolutions exposes the GPU’s limitations. The rank of 2985 suggests that many cheaper or similarly priced combinations achieve better performance in this specific game.

Best Settings per Resolution

For each resolution, the most demanding preset that maintains an average of at least 60 FPS is the "best" setting.

  • 3840x2160: No preset reaches 60 FPS. The highest average is 47 FPS on Low, so there is no best setting—the game is not playable at this resolution.
  • 2560x1440: Medium is the best playable setting, with an average of 69 FPS. Low also works (85 FPS), but Medium provides a better visual experience while staying above the threshold.
  • 1920x1080: Ultra is the best setting, averaging 61 FPS. High (81 FPS), Medium (105 FPS), and Low (130 FPS) are also playable, but Ultra offers the highest fidelity within the playable range.

The Verdict

This PC can run Palworld, but only at specific resolutions and settings. According to the verdictByResolution data, 1920x1080 is fully playable: all four presets—High, Low, Medium, and Ultra—exceed 60 FPS on average, with Ultra just clearing the bar at 61 FPS. At 2560x1440, only Low and Medium are playable, with Medium being the best choice at 69 FPS. At 3840x2160, no settings are playable; the highest average is 47 FPS on Low, which falls well short of the 60 FPS target.

In short, this combo is a solid 1080p machine for Palworld, capable of max settings at a playable frame rate. It can also handle 1440p with reduced settings, but 4K is out of reach. Users who prioritize high resolutions should consider a more powerful GPU, while those sticking to 1080p will find this setup adequate.