Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

29%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
84 FPS
Ultra 1080p Measured
40 FPS

1440p (2K / QHD)

Low 1440p Measured
56 FPS
Ultra 1440p Measured
26 FPS

4K (Ultra HD)

Low 4K Measured
31 FPS
Ultra 4K Measured
15 FPS
18.9ms Frame Time
28ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 19,593
Graphics Card
Required 27,862
Your GPU 1,482

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 15 19 25 31
1440p QHD 26 35 45 56
1080p Full HD 40 53 68 84

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 53
1920x1080 Low 84
1920x1080 Medium 68
1920x1080 Ultra 40
2560x1440 High 35
2560x1440 Low 56
2560x1440 Medium 45
2560x1440 Ultra 26
3840x2160 High 19
3840x2160 Low 31
3840x2160 Medium 25
3840x2160 Ultra 15

Performance Analysis: Palworld on Your System

Similar Performance Alternatives

The AMD Ryzen 5 5500 sits in a curious position within the database. Its average benchmark score of 19593 places it at the 73rd percentile among all CPUs, meaning it outperforms roughly three-quarters of the processors recorded. The nearest rivals are remarkably close in aggregate performance. The AMD Ryzen AI 5 430 scores 19617, a mere 0.1% difference. The Intel Core i5-12500 achieves 19668, just 0.4% higher. The Intel Core i7-10700F trails slightly at 19499, which is 0.5% lower. The Intel Core i5-11600KF leads this cluster with 19723, only 0.7% above the Ryzen 5 5500. These four alternatives would deliver nearly indistinguishable CPU-bound behavior in most games, including Palworld. The choice among them would likely come down to platform features rather than raw performance.

The Intel Arc B390 tells a different story. Its lone recorded benchmark, the 3DMark Steel Nomad DX12 test, yields a score of 1482. This places the GPU at only the 9th percentile among all tested graphics cards, a very low position. The nearest rivals are all older NVIDIA parts. The GeForce GT 520MX scores 1463, which is 1.3% lower. The GeForce 800M scores 1460, 1.5% lower. The GeForce GT 625 OEM scores 1446, 2.5% lower. The GeForce GT 710 scores 1443, 2.7% lower. The Arc B390 edges out each of these, but the margins are slim. In practical terms, this GPU behaves like a very modest entry-level part. When paired with the Ryzen 5 5500, the CPU is dramatically more capable relative to its peers than the GPU is relative to its own peers. This imbalance suggests the graphics card will define the gaming experience in Palworld.

FAQ

Q: What is the highest average frame rate this combo achieves in Palworld?

A: The best recorded result is 84 FPS average at 1920x1080 with Low settings. At the same resolution, Medium settings yield 68 FPS average, and High settings drop to 53 FPS average.

Q: Can this system run Palworld at 2560x1440?

A: The recorded data shows no playable settings at this resolution. The closest result is 56 FPS average on Low settings, which falls below the 60 FPS playable threshold. Medium settings average 45 FPS, High averages 35 FPS, and Ultra averages 26 FPS.

Q: What is the playable threshold for this database?

A: The playable threshold is set at 60 FPS. Any settings preset that maintains an average frame rate at or above this value is considered playable.

Q: Which settings presets are playable at 1920x1080?

A: Low and Medium are the only playable presets at this resolution. Low averages 84 FPS, and Medium averages 68 FPS. High falls short at 53 FPS, and Ultra averages only 40 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 5500 has an average benchmark score of 19593. Its closest rival, the AMD Ryzen AI 5 430, scores 19617, a difference of 0.1%. The Intel Core i5-12500 is 0.4% ahead, while the Intel Core i7-10700F is 0.5% behind and the Intel Core i5-11600KF is 0.7% ahead.

Q: How does the GPU compare to its nearest rivals?

A: The Intel Arc B390 scores 1482 in the 3DMark Steel Nomad DX12 test. The NVIDIA GeForce GT 520MX scores 1463 (1.3% lower), the GeForce 800M scores 1460 (1.5% lower), the GeForce GT 625 OEM scores 1446 (2.5% lower), and the GeForce GT 710 scores 1443 (2.7% lower).

Measured FPS Breakdown

The database contains measured frame rate data for twelve combinations of resolution and settings preset. All results come from actual testing, not estimates.

At 3840x2160, the results are uniformly below playable levels. Low settings produce an average of 31 FPS. Medium settings average 25 FPS, with a minimum of 21 FPS and a maximum of 29 FPS. High settings drop to 19 FPS average. Ultra settings are the slowest, averaging just 15 FPS. None of these approach the 60 FPS threshold.

At 2560x1440, the situation improves but remains insufficient. Low settings average 56 FPS, tantalizingly close to playable but still below the threshold. Medium settings average 45 FPS, with a minimum of 38 FPS and a maximum of 52 FPS. High settings average 35 FPS. Ultra settings average 26 FPS. The gap between Low and the playable threshold is only 4 FPS, which suggests that minor adjustments might close it, but the recorded presets do not achieve it.

At 1920x1080, the system finally reaches playable territory. Low settings deliver an average of 84 FPS, a comfortable margin above the 60 FPS threshold. Medium settings average 68 FPS, with a minimum of 58 FPS and a maximum of 79 FPS. The minimum frame rate here dips slightly below the playable threshold, though the average remains solidly playable. High settings average 53 FPS, below the threshold. Ultra settings average 40 FPS, the lowest result at this resolution.

The scaling pattern across resolutions is consistent. Moving from 1920x1080 to 2560x1440 reduces Low settings performance from 84 FPS to 56 FPS, a drop of 28 FPS. Medium settings fall from 68 FPS to 45 FPS, a drop of 23 FPS. High settings fall from 53 FPS to 35 FPS, a drop of 18 FPS. Ultra settings fall from 40 FPS to 26 FPS, a drop of 14 FPS. The absolute frame rate penalty shrinks as settings increase, but the percentage penalty remains similar.

How This Combo Ranks

The combination of the AMD Ryzen 5 5500 and Intel Arc B390 ranks 3297 out of 3711 tested combos in Palworld. This places the system in the bottom 11% of all recorded configurations. The rank reflects the GPU's severe performance limitation. The CPU is well above average in its own benchmarks, but the graphics card drags the overall gaming experience down.

The ranking implies that most tested systems outperform this combo. Only 414 combinations rank lower. This is not a surprise given the GPU's 9th percentile standing. The CPU's 73rd percentile cannot compensate for a graphics solution that sits near the bottom of the database. The data suggests that this pairing creates a significant bottleneck on the GPU side, and the frame rates recorded in Palworld align with that interpretation.

The gap between the CPU's relative strength and the GPU's relative weakness is unusually large. Most tested combos feature components that are more evenly matched. This imbalance matters because Palworld's rendering demands stress the GPU heavily. The measured FPS data confirms that the graphics card is the limiting factor at every resolution and settings preset.

The Verdict

Can this PC run Palworld? The answer depends entirely on the target resolution. The verdict data is unambiguous. At 3840x2160, no settings preset achieves playable performance. The best result is 31 FPS on Low settings, which is far below the 60 FPS threshold. At 2560x1440, the same story holds. No settings preset reaches 60 FPS. Low settings come closest at 56 FPS, but close does not count as playable.

At 1920x1080, the system is playable on Low and Medium settings. The database lists these two presets as playable, with Medium being the best playable option. Medium averages 68 FPS, which clears the threshold by 8 FPS. Low averages 84 FPS, offering a more comfortable margin. High settings at 53 FPS and Ultra at 40 FPS are not playable.

The practical verdict is that this system can run Palworld at 1080p with reduced settings. It cannot handle 1440p or 4K at playable frame rates. Users targeting higher resolutions would need a more powerful GPU. The CPU is not the constraint here; the recorded data shows that the GPU is the limiting factor across all tested configurations.

Best Settings per Resolution

At 3840x2160, there is no best setting because no preset achieves the 60 FPS threshold. The database records no playable settings for this resolution. The closest option is Low at 31 FPS average, but that remains unplayable.

At 2560x1440, the same situation applies. No settings preset reaches 60 FPS. The best recorded result is Low at 56 FPS average, which falls 4 FPS short of the playable threshold. Medium, High, and Ultra are progressively slower.

At 1920x1080, the most demanding preset that stays at or above 60 FPS is Medium. It delivers 68 FPS average, with a minimum of 58 FPS and a maximum of 79 FPS. Low settings also clear the threshold at 84 FPS average, but Medium is the better choice because it offers higher visual quality while still maintaining playable performance. High settings at 53 FPS and Ultra at 40 FPS are not viable.

The data indicates that 1080p Medium is the sweet spot for this combo. It provides a balance between visual fidelity and frame rate. The minimum frame rate of 58 FPS is slightly below the average threshold, but the average remains comfortably playable.

CPU and GPU Roles

The recorded data reveals a clear division of labor in this system. The CPU is far more capable, ranking at the 73rd percentile among all processors. The GPU is far less capable, ranking at the 9th percentile among all graphics cards. In Palworld, this imbalance manifests as GPU-bound performance at every resolution and settings preset.

The scaling between resolutions demonstrates the GPU's dominance. At 1920x1080 Low, the system averages 84 FPS. At 2560x1440 Low, it drops to 56 FPS. At 3840x2160 Low, it falls to 31 FPS. This progression shows that increasing pixel count has a dramatic impact on frame rate, which is a classic sign of GPU limitation. If the CPU were the bottleneck, the frame rate would not degrade so steeply with resolution.

The scaling between settings presets tells a similar story. At 1920x1080, the frame rate falls from 84 FPS on Low to 68 FPS on Medium to 53 FPS on High to 40 FPS on Ultra. These are large drops, indicating that the GPU struggles with increased rendering workload. The CPU's 12 threads and 6 Zen 3 cores are sufficient to feed the GPU at these settings, but the GPU cannot keep up with the demands of higher presets.

At higher resolutions, the GPU becomes even more dominant. At 3840x2160, the frame rate ranges from 31 FPS on Low to 15 FPS on Ultra. The CPU's role diminishes further as pixel count increases. The Ryzen 5 5500 has ample single-thread performance, as shown by its 3DMark single-thread score of 836 and passmark single-thread score of 3058, but this does not matter when the GPU is the limiting factor.

For users of this combo, the upgrade path is clear. Replacing the GPU with a more powerful model would yield substantial frame rate gains in Palworld. Replacing the CPU would produce little improvement because the current processor is not the constraint. The data strongly suggests that the Intel Arc B390 is the bottleneck, and the measured FPS figures across all resolutions and presets support this conclusion.