Instant compatibility check with FPS benchmarks and optimization tips
Palworld
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 19 | 25 | 31 |
| 1440p QHD | 26 | 35 | 45 | 56 |
| 1080p Full HD | 40 | 53 | 68 | 84 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Palworld on Your System
The AMD Ryzen 5 2600 paired with the Intel Arc B390 presents a highly constrained gaming experience in Palworld. The recorded data shows a system that struggles to maintain fluid frame rates at higher resolutions, with only the lowest presets at 1080p approaching acceptable performance. The benchmark results indicate a significant bottleneck in the GPU, which severely limits the overall gaming potential of this combination.
Measured FPS Breakdown
At 3840x2160, the data shows uniformly poor performance across all settings. The High preset delivers an average of 19 FPS. Lowering to Medium improves the average to 25 FPS, with recorded minimum and maximum values of 21 and 29 FPS respectively. The Low preset reaches a 31 FPS average, while the Ultra preset drops to a 15 FPS average. None of these figures approach the 60 FPS playable threshold, indicating that 4K resolution is entirely unviable for this game with this hardware.
Moving to 2560x1440, performance remains below the playable threshold for every preset. The High setting produces a 35 FPS average. Medium improves this to 45 FPS, with a minimum of 38 and a maximum of 52 FPS. The Low preset achieves a 56 FPS average, which is the closest result to 60 FPS at this resolution but still falls short. Ultra remains weak at a 26 FPS average. The data indicates that even the most aggressive settings reduction cannot push this combination past 60 FPS at 1440p.
At 1920x1080, the results finally show some viable configurations. The Low preset delivers an 84 FPS average, clearing the 60 FPS threshold with headroom. The Medium preset achieves a 68 FPS average, with a minimum of 58 and a maximum of 79 FPS. This also clears the playable threshold on average. The High preset falls to a 53 FPS average, below the target. The Ultra preset drops further to a 40 FPS average. The data clearly shows that 1080p is the only resolution where this system can deliver a playable experience, and only on the two lowest presets.
CPU and GPU Roles
The Intel Arc B390 is the dominant limiting factor in this configuration. Its benchmark percentile of 9 versus all GPUs, combined with a 3DMark Steel Nomad DX12 score of 1482, places it far below the performance level required for demanding modern games. The GPU's nearest rivals include the NVIDIA GeForce GT 520MX, which is 1.3% behind, and the NVIDIA GeForce GT 710, which is 2.7% behind. This comparison places the Arc B390 in the company of entry-level graphics solutions from over a decade ago.
The AMD Ryzen 5 2600, in contrast, sits at the 75th percentile versus all CPUs, with an average benchmark score of 21484. Its nearest rivals include the Intel Core Ultra 5 228V at 0.2% ahead and the Intel Xeon D-1746TER at 0.7% behind. This indicates a moderately capable processor that is not the primary constraint in this pairing.
The scaling between resolutions confirms the GPU bottleneck. From 1080p Low at 84 FPS to 1440p Low at 56 FPS, the frame rate drops by 33%. From 1440p Low to 4K Low at 31 FPS, the drop is 45%. This steep decline as pixel count increases is characteristic of a GPU-bound scenario. The CPU's role becomes more apparent at lower resolutions, but even at 1080p, the GPU's limitations are evident in the inability to maintain 60 FPS on the High preset.
Best Settings per Resolution
At 3840x2160, no preset achieves the 60 FPS playable threshold. The database records no playable settings for this resolution, and the best possible average FPS is 31 on the Low preset. This resolution should be avoided entirely with this hardware.
At 2560x1440, the situation is similar. No settings achieve 60 FPS, and the best average is 56 FPS on the Low preset. While this is close to the threshold, it does not meet the playable standard, so the database records no playable settings for 1440p either.
At 1920x1080, the Low and Medium presets are recorded as playable. The best settings for this resolution are Medium, which delivers a 68 FPS average. This is the most demanding preset that stays at or above 60 FPS, making it the recommended configuration for this system. The Low preset offers a higher 84 FPS average for users who prefer additional headroom, but Medium provides the best balance of visual quality and playable performance.
Similar Performance Alternatives
For the CPU, the Ryzen 5 2600's nearest rivals in the database are all within 1.2% of its average benchmark score. The Intel Core Ultra 5 228V scores 21440, which is 0.2% higher. The Intel Core i9-11900H scores 21367, 0.5% lower. The Intel Xeon D-1746TER scores 21635, 0.7% higher. The AMD EPYC 9454 scores 21223, 1.2% lower. Any of these processors would behave similarly to the Ryzen 5 2600 in this system, as the performance differences are negligible for gaming purposes.
For the GPU, the Intel Arc B390's nearest rivals are dramatically lower in performance. The NVIDIA GeForce GT 520MX scores 1463, 1.3% behind. The NVIDIA GeForce 800M scores 1460, 1.5% behind. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5% behind. The NVIDIA GeForce GT 710 scores 1443, 2.7% behind. These alternatives would produce near-identical frame rates in Palworld, confirming that the Arc B390 is firmly in the entry-level GPU category. Users with any of these GPUs paired with a similar CPU should expect the same limited performance profile.
The Verdict
The data is unambiguous: this system can run Palworld, but only under strict conditions. The verdict by resolution shows that 1920x1080 is the only resolution with playable settings, specifically Low and Medium. The Medium preset at 68 FPS average is the recommended configuration, as it clears the 60 FPS threshold while offering better visual quality than Low.
At 2560x1440 and 3840x2160, the verdict is clear: no playable settings exist. The best results are 56 FPS at 1440p Low and 31 FPS at 4K Low, both below the 60 FPS playable threshold. Users with this hardware should not attempt to run Palworld at these resolutions if they expect a smooth experience.
The combination of a mid-range CPU from 2018 and an entry-level integrated GPU from 2026 creates a severe performance imbalance. The Ryzen 5 2600 is capable of handling the game's logic, but the Arc B390 cannot render it at acceptable speeds beyond 1080p. For a playable experience, the system must be configured with the Low or Medium preset at 1080p.
How This Combo Ranks
The database ranks this combination at 3297 out of 3711 tested combos for Palworld. This places it in the bottom 11% of all tested systems, reflecting the severe GPU limitation. The ranking is consistent with the measured FPS data, which shows the system struggling to maintain even 60 FPS at 1080p on lower presets.
This rank indicates that most other hardware combinations tested in the database deliver better performance in Palworld. The combination's position is primarily driven by the Arc B390's very low GPU percentile of 9, which drags down the overall capability despite the Ryzen 5 2600's respectable 75th percentile CPU ranking. Users should interpret this rank as a warning that this system is not well suited for Palworld beyond the most modest settings.
FAQ
Q: Can this system run Palworld at 1080p?
A: Yes, but only on Low or Medium settings. The Low preset averages 84 FPS, while Medium averages 68 FPS. High and Ultra fall below the 60 FPS threshold at 53 FPS and 40 FPS respectively.
Q: What is the best settings preset for this system?
A: The best settings are Medium at 1920x1080, which delivers a 68 FPS average with a minimum of 58 FPS and a maximum of 79 FPS.
Q: Is Palworld playable at 1440p with this hardware?
A: No. The best result at 2560x1440 is 56 FPS on Low settings, which does not meet the 60 FPS playable threshold. Medium, High, and Ultra are worse at 45, 35, and 26 FPS respectively.
Q: How does the Intel Arc B390 compare to its nearest rivals?
A: The Arc B390 scores 1482 in 3DMark Steel Nomad DX12, which is 1.3% ahead of the NVIDIA GeForce GT 520MX and 2.7% ahead of the NVIDIA GeForce GT 710. These are all entry-level GPUs with similar performance.
Q: What is the FPS at 4K Ultra settings?
A: The average FPS at 3840x2160 on Ultra is 15 FPS, which is far below the playable threshold. Even Low settings at 4K only reach a 31 FPS average.
Q: How does this system rank among all tested combos for Palworld?
A: This combination ranks 3297 out of 3711 tested combos, placing it in the bottom portion of the database. The ranking reflects the GPU's severe performance limitations in this game.