Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Palworld
Survival 2024

Palworld

31%
Not Recommended Your system may struggle with this game.

Performance

1080p (Full HD)

Low 1080p Measured
76 FPS
Ultra 1080p Measured
36 FPS

1440p (2K / QHD)

Low 1440p Measured
50 FPS
Ultra 1440p Measured
24 FPS

4K (Ultra HD)

Low 4K Measured
28 FPS
Ultra 4K Measured
13 FPS
21.3ms Frame Time
32ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,522
Your CPU 21,484
Graphics Card
Required 27,862
Your GPU 1,184

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 13 17 23 28
1440p QHD 24 31 41 50
1080p Full HD 36 47 62 76

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 47
1920x1080 Low 76
1920x1080 Medium 62
1920x1080 Ultra 36
2560x1440 High 31
2560x1440 Low 50
2560x1440 Medium 41
2560x1440 Ultra 24
3840x2160 High 17
3840x2160 Low 28
3840x2160 Medium 23
3840x2160 Ultra 13

Performance Analysis: Palworld on Your System

FAQ

Q: Can this AMD Ryzen 5 2600 + Intel Arc B370 combination run Palworld at 1920x1080?

A: Yes, at 1920x1080 with Low or Medium settings. The measured average FPS is 76 on Low and 62 on Medium, both clearing the 60 FPS playable threshold. High (47 FPS) and Ultra (36 FPS) fall short.

Q: What is the best playable setting at 2560x1440?

A: None. The verdict data shows no playable settings at 2560x1440. The highest average FPS recorded is 50 on Low, which is below the 60 FPS threshold. Medium runs at 41 FPS, High at 31 FPS, and Ultra at 24 FPS.

Q: How does the Intel Arc B370 compare to its nearest GPU rivals?

A: The Arc B370 has an average benchmark score of 1184. Its nearest rivals include the ATI Mobility Radeon HD 5570 (1186, 0.2% higher), ATI Radeon HD 5770 (1190, 0.5% higher), AMD Radeon HD 7650M (1192, 0.7% higher), and AMD FirePro M2000 (1168, 1.4% lower). Performance is essentially within a 1.4% band.

Q: What does the CPU benchmark data show for the Ryzen 5 2600?

A: The Ryzen 5 2600 scores 1248 in Cinebench R15 multi-core, 157.3 in single-core, 5648 in Geekbench multi-core, and 1154 in single-core. Its PassMark multi-thread score is 13160, with a single-thread score of 2239. The average benchmark score is 21484, placing it in the 75th percentile among all CPUs.

Q: How does the CPU's nearest rival compare in average score?

A: The Intel Core Ultra 5 228V scores 21440 (0.2% lower), the Intel Core i9-11900H scores 21367 (0.5% lower), the Intel Xeon D-1746TER scores 21635 (0.7% higher), and the AMD EPYC 9454 scores 21223 (1.2% lower). All are within a 1.2% delta.

Q: What is the combo rank for this pairing in Palworld?

A: The combination ranks 3423 out of 3711 tested combos in the database, placing it in the lower portion of tested systems.

CPU and GPU Roles

The data reveals a stark asymmetry between the CPU and GPU contributions in Palworld. The AMD Ryzen 5 2600 is a 6-core, 12-thread processor from the 2000 series, built on the 12 nm Zen architecture. It carries a 75th percentile ranking among all CPUs, with a PassMark multi-thread score of 13160 and a single-thread score of 2239. This is a reasonably capable mid-range processor for its generation, and its nearest rivals in average benchmark score, such as the Intel Core Ultra 5 228V and Intel Core i9-11900H, are within a 0.5% delta in either direction.

The Intel Arc B370, by contrast, sits at the 5th percentile among all GPUs. It is an integrated graphics solution (IGP) based on the Xe3-LPG architecture, with 1280 shading units, 40 texture mapping units, and 20 raster output units. Its only recorded benchmark, 3DMark Steel Nomad DX12, yields a score of 1184. Its nearest rivals, all ATI or AMD FirePro parts from over a decade ago, are within a 1.4% performance band. This GPU is the clear bottleneck.

At 3840x2160, the GPU is heavily constrained. The average FPS ranges from 13 on Ultra to 28 on Low, a span of 15 FPS across the four presets. The CPU cannot compensate for the GPU's lack of fill rate and compute throughput at this resolution. The recorded pixel rate of 48.00 GPixel/s and texture rate of 96.00 GTexel/s are simply insufficient for 4K rendering.

At 2560x1440, the picture improves but remains GPU-bound. Low settings yield 50 FPS, Medium 41 FPS, High 31 FPS, and Ultra 24 FPS. The scaling from Low to Ultra is a 26 FPS drop, which indicates that the GPU's shading units and ROPs are the limiting factor, not the CPU's six cores. The Ryzen 5 2600's 12 threads and 16 MB shared L3 cache are more than adequate for Palworld's survival mechanics at this resolution.

At 1920x1080, the balance shifts slightly. Low settings hit 76 FPS, Medium 62 FPS, High 47 FPS, and Ultra 36 FPS. The gap between Low and Medium (14 FPS) is smaller than the gap between Medium and High (15 FPS), suggesting that the GPU starts to saturate its fixed-function units as settings rise. The CPU's single-thread performance, measured at 157.3 in Cinebench R15 single-core and 1154 in Geekbench single-core, is sufficient to feed the GPU at 1080p, but it cannot overcome the GPU's fundamental limits. Benchmark results indicate that resolution scaling has a greater impact on FPS than preset scaling, which is consistent with a GPU-bound configuration.

Measured FPS Breakdown

The measured data covers three resolutions and four presets each, with average FPS recorded for all combinations, and min/max values for Medium presets only.

At 3840x2160, the average FPS is 17 on High, 28 on Low, 23 on Medium, and 13 on Ultra. The Medium preset has min/max values of 19 and 26 respectively. The spread from Low to Ultra is 15 FPS, and even the best result, Low at 28 FPS, falls far below the 60 FPS threshold. The GPU's 6.144 TFLOPS FP32 throughput and 20 ROPs cannot handle 4K workloads in this title.

At 2560x1440, the average FPS is 31 on High, 50 on Low, 41 on Medium, and 24 on Ultra. Medium shows min/max of 35 and 47. Low at 50 FPS is the closest to playable, but it still misses the 60 FPS mark by 10 FPS. High at 31 FPS is halved from Low, and Ultra at 24 FPS is below what most users would consider acceptable for a survival game with fast-paced action.

At 1920x1080, the average FPS is 47 on High, 76 on Low, 62 on Medium, and 36 on Ultra. Medium has min/max of 52 and 71. Low and Medium clear the 60 FPS threshold, with Medium averaging 62 FPS and a minimum of 52 FPS. High at 47 FPS is playable in a loose sense but does not meet the database's 60 FPS playable threshold. Ultra at 36 FPS is a significant drop, indicating that the GPU's 10 ray tracing cores and 1280 shading units are overwhelmed by the highest settings.

The Medium preset at 1920x1080 is the only preset across all resolutions that both clears 60 FPS on average and has a recorded minimum (52 FPS) that stays within a reasonable range of the target. The min/max data for Medium at 2560x1440 (35 to 47) and 3840x2160 (19 to 26) confirm that lower resolutions yield both higher averages and tighter variance.

The Verdict

This PC can run Palworld, but only under strict conditions. The verdict data is unambiguous: at 3840x2160, no settings are playable, and the best average FPS is 28 on Low. At 2560x1440, no settings are playable either, with the best average FPS at 50 on Low. At 1920x1080, Low and Medium are playable, with Medium being the best playable preset at an average of 62 FPS.

The playable threshold is 60 FPS, and the system clears it at 1080p with Low (76 FPS) and Medium (62 FPS). High at 47 FPS and Ultra at 36 FPS do not meet the threshold. For users willing to accept 1440p, the closest option is Low at 50 FPS, which is below the threshold but may be acceptable for less demanding scenes. However, the recorded data does not classify it as playable.

The bottleneck is unequivocally the Intel Arc B370. The GPU's 5th percentile ranking, with a 3DMark Steel Nomad score of 1184, places it alongside integrated graphics from the early 2010s. The Ryzen 5 2600, with its 75th percentile CPU ranking and PassMark multi-thread score of 13160, is not the limiting factor at any resolution. Even at 4K, where the CPU has more work to do per frame, the GPU fails to deliver playable FPS. At 1080p, the CPU provides enough headroom for the GPU to reach 76 FPS on Low, but the GPU cannot sustain that performance as settings increase.

For the best experience, users should run at 1920x1080 with Medium settings. This yields an average of 62 FPS with a minimum of 52 FPS and a maximum of 71 FPS, which is a stable enough frame rate for a survival game where combat and building require consistent responsiveness.

Similar Performance Alternatives

The nearest rivals for the AMD Ryzen 5 2600 in average benchmark score are the Intel Core Ultra 5 228V (21440, 0.2% lower), Intel Core i9-11900H (21367, 0.5% lower), Intel Xeon D-1746TER (21635, 0.7% higher), and AMD EPYC 9454 (21223, 1.2% lower). These processors would behave nearly identically in Palworld, as their benchmark scores are within a 1.2% band of the Ryzen 5 2600's 21484. The Core Ultra 5 228V and Core i9-11900H are particularly relevant for gaming, while the Xeon and EPYC are server parts that would not be used in a gaming PC but serve as reference points for the score range.

The nearest rivals for the Intel Arc B370 in average benchmark score are the ATI Mobility Radeon HD 5570 (1186, 0.2% higher), ATI Radeon HD 5770 (1190, 0.5% higher), AMD Radeon HD 7650M (1192, 0.7% higher), and AMD FirePro M2000 (1168, 1.4% lower). These GPUs are all over a decade old and would deliver similar frame rates in Palworld. The ATI Radeon HD 5770, for instance, was a mid-range desktop card from 2009, and its performance would be virtually indistinguishable from the Arc B370 in this game. The AMD Radeon HD 7650M is a laptop GPU from 2012, and the ATI Mobility Radeon HD 5570 is an even older mobile part. The AMD FirePro M2000 is a workstation GPU from 2012.

If a user had a system with any of these GPU alternatives paired with the Ryzen 5 2600, the Palworld FPS would be within 1.4% of the measured values. This means that users upgrading from an ATI Radeon HD 5770 to an Intel Arc B370 would see no meaningful improvement in this game. Conversely, users with a Ryzen 5 2600 and a more modern discrete GPU would see significantly higher FPS, but that is beyond the scope of this data.

How This Combo Ranks

The AMD Ryzen 5 2600 + Intel Arc B370 combination ranks 3423 out of 3711 tested combos in Palworld. This places it in the bottom 7.8% of all tested systems. The rank reflects the GPU's severe limitation, as the CPU alone would rank much higher on a percentile basis.

The rank is consistent with the measured FPS data. At 1920x1080, the system achieves 76 FPS on Low and 62 FPS on Medium, which are playable, but the 36 FPS on Ultra and the complete lack of playable settings at higher resolutions drag the overall ranking down. The database includes many combos with discrete GPUs that can handle 1440p or 4K, so this IGP-based system falls behind them.

The 5th percentile GPU ranking is the primary driver of the 3423rd place finish. The 75th percentile CPU ranking is irrelevant in this context because the GPU cannot utilize the CPU's full potential. In Palworld, the GPU is the limiting factor at every resolution and preset, and the combo rank reflects that.

Best Settings per Resolution

At 3840x2160, there is no best setting because no preset achieves 60 FPS on average. The highest average FPS is 28 on Low, but the verdict data lists no playable settings for this resolution, so the recommendation is to avoid 4K entirely.

At 2560x1440, there is also no best setting. The verdict data lists no playable settings, and the highest average FPS is 50 on Low. Users who must play at 1440p should use Low settings for the least bad experience, but they will be below the 60 FPS threshold.

At 1920x1080, the best playable preset is Medium, with an average FPS of 62. This is the most demanding preset that stays at or above 60 FPS. Low also clears the threshold at 76 FPS, but Medium offers higher visual quality while still maintaining a 62 FPS average and a 52 FPS minimum. The jump from Medium to High (47 FPS) is a 15 FPS drop, which is not worth the visual upgrade given the threshold. For users prioritizing frame rate stability over visual fidelity, Low at 76 FPS is the safer choice, but Medium provides the best balance of quality and performance for this system.