Instant compatibility check with FPS benchmarks and optimization tips
Outriders
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 32 | 42 | 58 |
| 1440p QHD | 44 | 61 | 81 | 111 |
| 1080p Full HD | 70 | 96 | 128 | 157 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Outriders on Your System
Measured FPS Breakdown
The recorded data for Outriders with the Intel Core i5-10400F and Intel Arc B570 shows a clear performance ladder across the three tested resolutions. At 1920x1080, the combo delivers strong frame rates across all presets. Low settings produce an average of 157 FPS, Medium averages 128 FPS with a 109 FPS minimum and 148 FPS maximum, High averages 96 FPS, and Ultra averages 70 FPS. The 1080p results are consistently above the 60 FPS playability threshold, with Ultra still leaving a 10 FPS margin of headroom.
Moving to 2560x1440, the averages step down noticeably but remain playable on most presets. Low settings average 111 FPS, Medium averages 81 FPS with a 69 FPS minimum and 93 FPS maximum, and High averages 61 FPS. Ultra falls to 44 FPS, which sits below the 60 FPS threshold. The 1440p Medium preset keeps the minimum above 60 FPS, while High just barely clears the average threshold at 61 FPS, though the recorded minimum for High is not reported in the data.
At 3840x2160, the combo struggles to maintain playable averages. Low settings average 58 FPS, which is just under the 60 FPS threshold. Medium averages 42 FPS with a 36 FPS minimum and 49 FPS maximum, High averages 32 FPS, and Ultra averages 23 FPS. None of the 4K presets reach a playable average, and the gap between Low and the next step up is substantial, indicating a steep scaling curve at this resolution.
The data shows that the Arc B570's 10 GB of GDDR6 memory on a 160-bit bus with 380.0 GB/s bandwidth is sufficient for 1080p and 1440p gaming in Outriders, but the 4K results reveal a hard limit. The 58 FPS at 4K Low is tantalizingly close to playable, but the average fails to clear the threshold. There are no min or max FPS values recorded for the 4K Low preset, so the frame time consistency at that setting remains unknown from the measured data.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is Ultra, which averages 70 FPS. This gives the full visual experience without dropping below the playability threshold. Since Low, Medium, and High all produce higher averages (157, 128, and 96 FPS respectively), Ultra is the clear choice for maximizing image quality while maintaining smooth gameplay.
At 2560x1440, the best playable option is High, averaging 61 FPS. This is the most demanding preset that clears 60 FPS, though the margin is slim. Medium averages 81 FPS and Low averages 111 FPS, both of which are also playable, but High offers the best visual quality among the playable options. The Ultra preset at 44 FPS is not playable, so users at 1440p should stick with High or lower.
At 3840x2160, no preset reaches the 60 FPS threshold. Low averages 58 FPS, which is the closest option but still below the playable mark. Medium, High, and Ultra average 42, 32, and 23 FPS respectively. There is no recommended preset for 4K gaming with this combo in Outriders; the data indicates that this resolution is not viable for a consistent 60 FPS experience.
The pattern across resolutions shows that the Arc B570 has enough compute headroom for 1080p Ultra and 1440p High, but 4K demands more than the 11.52 TFLOPS FP32 throughput and 200.0 GPixel/s pixel rate can deliver in this title. The 150 W TDP and 450 W suggested PSU indicate the card is positioned for mainstream gaming, and the measured results align with that positioning.
How This Combo Ranks
The Intel Core i5-10400F and Intel Arc B570 combination ranks 3042 out of 3710 tested combos in Outriders. This places the pairing in the lower portion of the database, roughly in the 18th percentile of all tested configurations. The rank reflects that while the combo handles 1080p and 1440p well, the 4K results drag down its overall standing compared to higher-end pairings.
The CPU's benchmark scores support this mid-range positioning. The i5-10400F achieves a 68th percentile ranking among all CPUs, with an average benchmark score of 14185. Its Cinebench R23 multi-core score of 10283 and single-core score of 1451 indicate a solid 6-core, 12-thread processor from the Comet Lake architecture. The 3DMark 16-thread score of 4748 and max-thread score of 4735 show consistent scaling across thread counts, while the 2-thread score of 1350 and single-thread score of 688 reveal the per-core performance ceiling.
The GPU's percentile ranking is similar at 65th among all GPUs, with an average benchmark score of 20556. The PassMark G3D score of 14195 and DirectX 12 score of 72 indicate the Arc B570's DirectX 12 Ultimate support translates into reasonable gaming performance. The Geekbench Vulkan score of 96844 is notably higher than the OpenCL score of 83514, suggesting the driver stack favors Vulkan workloads, which is relevant for Outriders' rendering path.
The combo rank of 3042 out of 3710 means that roughly 82% of tested configurations outperform this pairing in Outriders. However, the rank is not a condemnation: the measured FPS data shows that the combo clears 60 FPS at both 1080p and 1440p on appropriate presets, which is the practical metric for most players. The rank reflects the inclusion of far more powerful combos in the database, not a failure to deliver playable performance at mainstream resolutions.
Similar Performance Alternatives
Looking at the nearest rivals in the database, the Intel Core i5-10400F sits at an average benchmark score of 14185, with four comparable CPUs within a narrow band. The Intel Xeon 6756E scores 14163, a delta of 0.2% below the i5-10400F. The Intel Core 7 160UL scores 14232, 0.3% higher. The AMD EPYC 7552 scores 14115, 0.5% lower. The AMD Ryzen 3 7320C scores 14277, 0.6% higher. These deltas are all within a single percentage point, meaning any of these CPUs would produce nearly identical frame rates in Outriders when paired with the same GPU. The practical takeaway is that if a system builder already has any of these processors, the gaming experience would be essentially indistinguishable from the i5-10400F.
On the GPU side, the Intel Arc B570 averages 20556 in the database. Its nearest rivals are similarly close in aggregate score. The NVIDIA GeForce RTX 3070 Mobile scores 20534, a 0.1% delta. The Intel Arc A750 scores 20582, 0.1% higher. The NVIDIA Quadro M4000M scores 20480, 0.4% lower. The AMD Radeon R9 M390X scores 20662, 0.5% higher. Again, these deltas are minimal, so swapping the Arc B570 for any of these GPUs would yield nearly the same measured performance in Outriders. The Arc A750 is particularly relevant as a desktop alternative from the same vendor, and the RTX 3070 Mobile represents a laptop-class option that lands in the same performance envelope.
For a builder considering upgrades or replacements, the data suggests that moving to a significantly faster GPU would be necessary to improve 4K results, since the current nearest rivals all land within 0.5% of the Arc B570's average score. The 4K Ultra average of 23 FPS and 4K High average of 32 FPS would require a GPU with substantially more headroom, not a sidegrade within this performance band.
FAQ
Q: Can this PC run Outriders at 1080p with the highest settings?
A: Yes. The measured data shows the combo averages 70 FPS at 1920x1080 with Ultra settings, which clears the 60 FPS playability threshold. Low, Medium, and High settings all produce higher averages (157, 128, and 96 FPS respectively).
Q: What is the best settings preset for 1440p gaming?
A: High settings at 2560x1440 average 61 FPS, making it the most demanding preset that stays at or above 60 FPS. Medium averages 81 FPS and Low averages 111 FPS, but High offers the best visual quality among playable options. Ultra at 1440p averages 44 FPS and is not playable.
Q: Is this combo capable of 4K gaming in Outriders?
A: No. None of the 4K presets reach the 60 FPS threshold. Low settings average 58 FPS, which is the closest option but still below the playable mark. Medium averages 42 FPS, High averages 32 FPS, and Ultra averages 23 FPS. The verdict data lists no playable settings at 3840x2160.
Q: How does the Intel Arc B570 compare to the Intel Arc A750?
A: The database shows the Arc B570 has an average benchmark score of 20556, while the Arc A750 scores 20582, a delta of 0.1%. This means the two GPUs perform nearly identically in aggregate, so a system using the Arc A750 would deliver essentially the same frame rates in Outriders as the Arc B570.
Q: What is the frame rate range at 1080p Medium settings?
A: The recorded data shows an average of 128 FPS, with a minimum of 109 FPS and a maximum of 148 FPS at 1920x1080 Medium. This indicates consistent frame delivery with no severe dips below the average.
Q: Does the CPU limit the GPU in this game?
A: The CPU's benchmark scores show a single-thread score of 688 in 3DMark and 1451 in Cinebench R23, which are moderate for a 6-core Comet Lake part. The measured FPS at 1080p Low (157 FPS) suggests the GPU is well utilized at lower settings, but the 4K results indicate the GPU becomes the limiting factor at higher resolutions. The data does not show a scenario where the CPU clearly bottlenecks the GPU in Outriders.
The Verdict
The Intel Core i5-10400F and Intel Arc B570 combination can run Outriders, but the playable experience depends entirely on resolution. At 1920x1080, the verdict is clear: all four presets (Low, Medium, High, Ultra) clear the 60 FPS threshold, with Ultra averaging 70 FPS. This is the sweet spot for this combo, offering full visual fidelity without compromising smoothness.
At 2560x1440, the combo remains viable but with tighter margins. High settings average 61 FPS, which clears the threshold by the slimmest of margins. Medium and Low are also playable with averages of 81 FPS and 111 FPS respectively. Ultra at 1440p is not playable at 44 FPS. Players with 1440p monitors should run High settings for the best balance of quality and performance.
At 3840x2160, the verdict is negative. No preset reaches the 60 FPS threshold, and the best option (Low) averages 58 FPS, which is just short of playable. The remaining presets fall well below the mark. This combo is not suitable for 4K gaming in Outriders.
For the majority of players using 1080p displays, this pairing delivers a fully playable experience with headroom to spare. For 1440p users, it works with reduced settings. For 4K users, the data says to look elsewhere or accept sub-60 FPS gameplay. The combo's rank of 3042 out of 3710 reflects this mixed picture: it is not a top-tier performer, but it handles the mainstream resolutions that most gamers actually use.