Instant compatibility check with FPS benchmarks and optimization tips
Outriders
Performance
1080p (Full HD)
1440p (2K / QHD)
4K (Ultra HD)
Requirements Check
Recommendations
Your hardware doesn't meet minimum requirements for this game.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 21 | 28 | 38 |
| 1440p QHD | 29 | 40 | 53 | 72 |
| 1080p Full HD | 45 | 63 | 83 | 115 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.
Performance Analysis: Outriders on Your System
Measured FPS Breakdown
At 1920x1080, this combination delivers its strongest results. Low settings produce an average of 115 FPS, which is the highest recorded figure for this pairing at any resolution or preset. Medium settings follow at 83 FPS average, with a minimum of 71 FPS and a maximum of 96 FPS, indicating a stable frame delivery window. High settings still clear the 60 FPS threshold with an average of 63 FPS. Ultra settings, however, drop the average to 45 FPS, which falls below the playable line.
Moving to 2560x1440, the performance picture shifts downward noticeably. Low settings average 72 FPS, still above the 60 FPS playable threshold. Medium settings average 53 FPS, with a recorded minimum of 45 FPS and a maximum of 61 FPS. High settings average 40 FPS, and Ultra settings drop to 29 FPS. The gap between Low and Medium at this resolution is 19 FPS, while the gap between Medium and High is 13 FPS, showing that each step up in quality costs a substantial portion of frame rate.
At 3840x2160, none of the presets reach playable levels. Low settings average 38 FPS, Medium averages 28 FPS with a minimum of 23 FPS and a maximum of 32 FPS, High averages 21 FPS, and Ultra averages 15 FPS. The scaling from Low to Medium at 4K is a 10 FPS drop, and from Medium to High another 7 FPS drop. The data shows a consistent pattern: this hardware combination is progressively overwhelmed as pixel count rises, and even the least demanding preset at 4K cannot approach 60 FPS.
The frame time consistency also varies by resolution. At 1080p Medium, the spread between minimum and maximum is 25 FPS. At 1440p Medium, the spread is 16 FPS. At 4K Medium, the spread is 9 FPS. Interestingly, the absolute frame rate drops at higher resolutions, but the variability narrows, suggesting the bottleneck becomes more uniform under heavier load.
CPU and GPU Roles
The Intel Core i5-10400F is a 6-core, 12-thread processor from the Comet Lake architecture, while the Intel Arc B390 is an integrated-class GPU based on the Xe3-LPG architecture with 1536 shading units. The recorded data indicates that the GPU is the dominant constraint in almost every scenario tested.
Evidence for this comes from the resolution scaling behavior. At 1080p Low, the average is 115 FPS. At 1440p Low, the average drops to 72 FPS, a 37% reduction. At 4K Low, the average falls to 38 FPS, a 47% reduction from 1440p. This steep decline with increasing pixel count is characteristic of a GPU-bound configuration, where the rendering work per frame scales directly with resolution and the graphics processor cannot keep pace.
The CPU's role becomes more apparent at lower resolutions and lower presets. At 1080p Low, the system reaches 115 FPS, which is a high enough frame rate that the processor's single-thread performance (a 3DMark single-thread score of 688) becomes relevant. The Core i5-10400F has a boost clock of 4.30 GHz and a passmark single-thread score of 2541, which are adequate for feeding a GPU at moderate frame rates. However, the Arc B390's modest compute resources, 7.680 TFLOPS FP32 and a 3DMark Steel Nomad DX12 score of 1482, mean the GPU saturates well before the CPU becomes a limiting factor at higher settings.
At 4K, the CPU's influence is minimal. The frame rates at 4K range from 15 FPS on Ultra to 38 FPS on Low, all far below the point where a 6-core, 12-thread processor would struggle. The processor's multi-threaded capabilities, such as a Cinebench R23 multi-core score of 10283, are simply not exercised at these frame rates. The bottleneck is exclusively the GPU's pixel throughput, which is rated at 60.00 GPixel/s.
The preset scaling further confirms the GPU-bound nature. At 1080p, moving from Low to Medium costs 32 FPS, from Medium to High costs 20 FPS, and from High to Ultra costs 18 FPS. This consistent degradation across quality steps reflects the GPU's limited shading units (1536) and texture mapping units (48), which directly impact the cost of higher-quality rendering features. The CPU, with its 12 MB of shared L3 cache and dual-channel DDR4 memory support, does not show signs of being the constraining factor in these transitions.
Similar Performance Alternatives
Looking at the nearest rivals in the database, the Intel Core i5-10400F sits in a tight cluster of processors. The Intel Xeon 6756E has an average score of 14163, just 0.2% below the Core i5-10400F's average benchmark score of 14185. The Intel Core 7 160UL scores 14232, which is 0.3% higher. The AMD EPYC 7552 scores 14115, 0.5% lower. The AMD Ryzen 3 7320C scores 14277, 0.6% higher. In practical terms, any of these processors would deliver nearly identical frame rates in Outriders when paired with the same GPU, since the differences are all within a fraction of a percent.
For the Intel Arc B390, the nearest rivals are significantly weaker in absolute terms, which reflects the GPU's low percentile ranking of 9 among all GPUs. The NVIDIA GeForce GT 520MX scores 1463, 1.3% below the Arc B390's 1482. The NVIDIA GeForce 800M scores 1460, 1.5% lower. The NVIDIA GeForce GT 625 OEM scores 1446, 2.5% lower. The NVIDIA GeForce GT 710 scores 1443, 2.7% lower. These deltas are small, meaning a system with any of these GPUs would produce very similar Outriders frame rates, all of them struggling to maintain playable performance at higher resolutions.
The combination of a middle-tier 10th Gen Intel processor with a very low-tier GPU creates a system where the graphics component defines the experience. Swapping the Core i5-10400F for any of its nearest rivals would change virtually nothing in Outriders, since the GPU is the limiting factor across all tested settings and resolutions. Conversely, swapping the Arc B390 for any of its nearest rivals would also change little, as the performance gap among them is under 3%.
How This Combo Ranks
The combination of the Intel Core i5-10400F and Intel Arc B390 ranks 3299 out of 3710 tested combinations in Outriders. This places it in the lower 11% of all recorded configurations, meaning roughly 89% of tested systems deliver better performance in this game.
The rank is consistent with the measured frame rates. At 1080p, the combo can clear 60 FPS on three of four presets, which is respectable for a low-end configuration. But the inability to sustain playable frame rates at 1440p beyond Low settings, and the complete failure at 4K across all presets, drags the overall standing down. The percentile ranking of the GPU alone, 9th percentile among all GPUs, is the primary contributor to this low combo position.
It is notably the CPU's percentile ranking of 68 is far healthier. The Core i5-10400F is a competent processor, but it is paired with a graphics solution that cannot translate that processing capability into high frame rates at demanding settings. The database shows many combinations where a weaker CPU paired with a stronger GPU would outrank this setup, because Outriders scales heavily with graphics throughput at the resolutions tested.
The Verdict
Can this PC run Outriders? The answer depends entirely on the resolution and settings target. At 1920x1080, the system is playable on High, Medium, and Low settings, with High averaging 63 FPS, Medium averaging 83 FPS, and Low averaging 115 FPS. At 2560x1440, only Low settings clear the 60 FPS threshold, averaging 72 FPS. At 3840x2160, no preset achieves playable performance; the best case is Low at 38 FPS, which is well below the 60 FPS playable threshold used by the database.
The verdict data confirms this split. For 3840x2160, the playable settings list is empty, meaning there is no configuration that reaches 60 FPS. For 2560x1440, Low is the only playable preset. For 1920x1080, High, Low, and Medium are all playable, with High being the best among them.
This is a system for 1080p gaming in Outriders. Users who accept High settings at 1080p will get a stable experience around 63 FPS, and those who prefer higher frame rates can drop to Medium or Low for 83 FPS or 115 FPS respectively. At higher resolutions, the hardware is not sufficient for smooth gameplay.
Best Settings per Resolution
At 1920x1080, the most demanding preset that stays at or above 60 FPS is High, with an average of 63 FPS. This is the recommended configuration for 1080p, as it provides the best visual quality while still clearing the playable threshold. Medium settings offer a comfortable margin at 83 FPS for users who want headroom, and Low reaches 115 FPS for competitive play or high refresh rate displays.
At 2560x1440, the only preset that stays at or above 60 FPS is Low, with an average of 72 FPS. Medium falls to 53 FPS, which is below the playable line. Users at this resolution must accept Low settings or reduce the resolution to 1080p for higher quality presets.
At 3840x2160, there is no preset that reaches 60 FPS. The best available average is Low at 38 FPS, which is not playable by the database's threshold. Users with a 4K display should avoid this combination for Outriders, or run the game at a lower resolution with appropriate settings.
For the best overall experience, the data points to 1080p High as the sweet spot: it is the highest quality preset that maintains 60 FPS, and it does so with a modest margin of 3 FPS above the threshold. Users who prioritize smoothness over visuals can select Medium at 1080p, which provides a 23 FPS buffer over the playable line.