Can I Run It?

Instant compatibility check with FPS benchmarks and optimization tips

Minimum
Third-Person Shooter 2014

Minimum

77%
Great Match Your system meets recommended requirements.

Performance

1080p (Full HD)

Low 1080p Measured
210 FPS
Ultra 1080p Measured
103 FPS

1440p (2K / QHD)

Low 1440p Measured
135 FPS
Ultra 1440p Measured
66 FPS

4K (Ultra HD)

Low 4K Measured
73 FPS
Ultra 4K Measured
36 FPS
7.4ms Frame Time
11ms Input Latency
1440p Best Resolution

Requirements Check

Processor
Required 37,425
Your CPU 84,003
Graphics Card
Required 27,663
Your GPU 16,129

Recommendations

Upgrade Needed

Your hardware doesn't meet minimum requirements for this game.

Ray Tracing Ready

Your GPU supports ray tracing.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 47 56 73
1440p QHD 66 87 103 135
1080p Full HD 103 135 160 210

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30. Cards marked Estimated above have no measured row and are scaled from your GPU benchmark percentile.

Every measured configuration

1920x1080 High 135
1920x1080 Low 210
1920x1080 Medium 160
1920x1080 Ultra 103
2560x1440 High 87
2560x1440 Low 135
2560x1440 Medium 103
2560x1440 Ultra 66
3840x2160 High 47
3840x2160 Low 73
3840x2160 Medium 56
3840x2160 Ultra 36

Performance Analysis: Minimum on Your System

The Intel Core Ultra 9 290K Plus paired with the NVIDIA GeForce RTX 3060 Ti delivers a broad range of performance in Minimum, a third-person shooter released in June 2014. Benchmark data shows this combination is capable of high refresh rates at mainstream resolutions, while 4K requires careful settings choices. The CPU sits in the 96th percentile among all tested processors, while the GPU ranks in the 59th percentile, indicating a substantial imbalance where the processor has significant headroom. This analysis breaks down the measured FPS across three resolutions and four quality presets, examines component roles, and provides clear verdicts for each resolution.

Measured FPS Breakdown

The measured FPS data covers 1920x1080, 2560x1440, and 3840x2160, each with Low, Medium, High, and Ultra settings. At 1920x1080, the system is overwhelmingly fast. The Low preset averages 210 FPS, which is the highest measured average in the entire dataset. Medium drops to 160 FPS with a minimum of 136 and maximum of 185 FPS. High averages 135 FPS, and Ultra still achieves 103 FPS. Every single setting at 1080p clears the 60 FPS playable threshold by a wide margin, with even the most demanding preset nearly doubling that figure.

Moving to 2560x1440, the performance remains strong but shows the expected scaling penalty. Low averages 135 FPS, matching the 1080p High result. Medium averages 103 FPS with a minimum of 88 and maximum of 119 FPS. High averages 87 FPS, and Ultra averages 66 FPS. The Ultra preset is the only one that dips close to the playable threshold, but it still stays above it. The gap between Low and Ultra at this resolution is 69 FPS, illustrating a significant but manageable settings impact.

At 3840x2160, the picture changes dramatically. Low averages 73 FPS, which remains comfortably above 60 FPS. Medium drops to 56 FPS average with a minimum of 47 and maximum of 64 FPS. High averages 47 FPS, and Ultra falls to 36 FPS. The data reveals a steep cliff between Low and Medium at 4K, with an 17 FPS average drop. Neither High nor Ultra at 4K reaches the playable threshold, and even Medium fails to hold a consistent 60 FPS, evidenced by its 47 FPS minimum.

For presets with min/max data, the Medium settings show the most complete picture. At 1080p Medium, the spread from 136 to 185 FPS indicates a 49 FPS range, suggesting some scene complexity variations. At 1440p Medium, the range narrows to 31 FPS (88 to 119). At 4K Medium, the range is 17 FPS (47 to 64), which is tighter but also closer to the failure point. The absence of min/max data for other presets means those figures are averages only, but the Medium preset data suggests stability improves as resolution increases, likely due to GPU-bound frame pacing.

FAQ

*Q: Can this PC run Minimum at 4K with playable frame rates?*

A: Yes, but only at the Low preset, which averages 73 FPS. Medium averages 56 FPS, High averages 47 FPS, and Ultra averages 36 FPS, all below the 60 FPS playable threshold.

Q: What is the best preset at 2560x1440 that stays above 60 FPS?

A: Ultra is playable at 1440p, averaging 66 FPS. This makes it the most demanding preset that maintains 60+ FPS at that resolution.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Core Ultra 9 290K Plus has an average benchmark score of 84003. Its closest rival, the Intel Core Ultra 9 285K, scores 83807, a 0.2% difference. The AMD EPYC 4584PX scores 83090 (1.1% lower), and the AMD EPYC 9135 scores 82980 (1.2% lower). The AMD EPYC 7F72 scores 85072, which is 1.3% higher.

Q: What is the FPS difference between 1080p and 4K at the Ultra preset?

A: At 1080p Ultra, the average FPS is 103. At 4K Ultra, it drops to 36 FPS. This represents a 67 FPS reduction, or roughly a 65% decrease in average frame rate.

Q: Which GPU settings show the largest performance gap at 4K?

A: The jump from Low (73 FPS average) to Medium (56 FPS average) is 17 FPS, and from Medium to High (47 FPS average) is 9 FPS. The largest single drop is from High to Ultra, which falls 11 FPS to 36 FPS average.

Q: Is the GPU or CPU more likely to be the limiting factor at 1920x1080?

A: Given the GPU’s 59th percentile ranking versus the CPU’s 96th percentile, and the fact that 1080p Low produces 210 FPS average, the GPU is clearly the bottleneck at this resolution. The CPU has substantial headroom, as indicated by its much higher percentile position.

CPU and GPU Roles

The benchmark data reveals a clear division of labor between the Intel Core Ultra 9 290K Plus and the NVIDIA GeForce RTX 3060 Ti. The CPU, with 24 cores and 24 threads, boosts to 5.80 GHz and scores 51731 in Cinebench R23 multi-core, placing it in the 96th percentile of all CPUs. The GPU, with 4864 shading units and 8 GB of GDDR6 memory, scores 20349 in Passmark G3D, placing it in the 59th percentile. This percentile gap suggests the CPU is far more powerful relative to its peers than the GPU.

At 1920x1080, the GPU is the dominant constraint. The frame rates scale significantly with settings: 210 FPS at Low, 160 FPS at Medium, 135 FPS at High, and 103 FPS at Ultra. This 107 FPS spread across presets indicates that the GPU workload is the primary variable. The CPU can feed frames at these rates without issue, given its high single-thread score of 7303 in Cinebench R23. The resolution scaling from 1080p to 1440p shows a moderate impact, with Ultra dropping from 103 to 66 FPS, a 37 FPS reduction. This is consistent with GPU-bound performance where pixel count increases.

At 3840x2160, the GPU becomes even more critical. The 4K results show the steepest settings scaling: 73 FPS Low, 56 FPS Medium, 47 FPS High, and 36 FPS Ultra. The 4K Ultra result is less than half the 1440p Ultra result, and about a third of the 1080p Ultra result. This exponential drop with resolution indicates that the RTX 3060 Ti’s 448.0 GB/s memory bandwidth and 16.20 TFLOPS FP32 compute are insufficient for demanding 4K presets. The CPU, by contrast, would not be expected to bottleneck at these lower frame rates, as its 24 threads and high boost clock provide ample headroom.

The data implies that for this game, the CPU matters most at low resolutions and low presets, where the GPU can produce very high frame rates. At 1080p Low, the 210 FPS average suggests the system is approaching the limits of what the GPU can output, and the CPU’s role is to keep up with draw calls and game logic. At higher resolutions and presets, the GPU’s fill rate and memory bandwidth become the limiting factors, as evidenced by the 4K Ultra result of 36 FPS. The scaling between resolutions is not linear, which points to the GPU’s memory subsystem as a key constraint at 4K.

The Verdict

The verdict is clear for each resolution. At 1920x1080, this PC runs Minimum exceptionally well. Every preset from Low to Ultra clears 60 FPS, with Ultra averaging 103 FPS. The best settings at this resolution are Ultra, which provides the highest visual quality while maintaining a comfortable margin above the playable threshold.

At 2560x1440, the system remains fully playable across all presets. High averages 87 FPS, Medium averages 103 FPS, and Low averages 135 FPS. Ultra averages 66 FPS, which clears 60 FPS but with a narrower margin. The best settings at this resolution are also Ultra, as it stays above the threshold while delivering maximum quality.

At 3840x2160, the situation is more restrictive. The only playable preset is Low, which averages 73 FPS. Medium averages 56 FPS, just below the 60 FPS threshold, and its minimum of 47 FPS indicates noticeable drops. High and Ultra are not playable, with averages of 47 and 36 FPS respectively. The verdict for 4K is that the system can run the game, but only at Low settings. For users who prioritize visual fidelity at 4K, this combination will not deliver a consistent 60 FPS experience beyond the Low preset.

Similar Performance Alternatives

The CPU has four nearest rivals in the benchmark database. The Intel Core Ultra 9 285K is the closest match, with an average score of 83807 compared to the 290K Plus’s 84003, a negligible 0.2% difference. The AMD EPYC 4584PX scores 83090 (1.1% lower), and the AMD EPYC 9135 scores 82980 (1.2% lower). The AMD EPYC 7F72 is slightly faster at 85072, a 1.3% delta. For gaming purposes, any of these would behave nearly identically in Minimum, as the CPU is not the bottleneck at most settings. The 285K is the most direct equivalent, while the EPYC parts are server-class chips that would show similar synthetic performance but may differ in gaming workloads due to other factors.

The GPU’s nearest rivals are also closely matched. The AMD Radeon RX 9060 scores 16014, which is 0.7% lower than the RTX 3060 Ti’s 16129 average. The AMD Radeon Pro 5600M scores 16351 (1.4% higher), and the AMD Radeon RX 5700 XT scores 16361 (1.4% higher). The AMD Radeon R9 370X scores 15862, which is 1.7% lower. In Minimum, these GPUs would produce very similar frame rates, with the RX 5700 XT and Pro 5600M being marginally faster. The RX 9060 would be slightly slower but within a couple of percentage points. Users with any of these GPUs can expect comparable performance to the RTX 3060 Ti, especially at 1080p and 1440p where the differences are smaller than the settings scaling.

How This Combo Ranks

This specific combination of CPU and GPU ranks 1838 out of 3712 tested combos in Minimum, placing it in the 49.5th percentile of all tested systems. This rank reflects the GPU’s mid-range position (59th percentile) pulling down the overall result, despite the CPU’s top-tier position (96th percentile). The rank suggests that while the CPU is among the best, the GPU limits the system to roughly the middle of the pack for this game.

The ranking has practical implications. A system with a weaker CPU but a stronger GPU would likely rank higher in Minimum, since the game appears to be GPU-bound at most resolutions and settings. The data shows that at 1080p Ultra, the system achieves 103 FPS, which is good but not exceptional for a CPU this powerful. At 4K, the GPU’s limitations are more apparent, with only the Low preset being playable. The rank of 1838 out of 3712 indicates that many other combos deliver better performance, likely those with more balanced or GPU-heavy configurations. For users seeking higher rankings, upgrading the GPU would have a more significant impact than upgrading the already-powerful CPU.

Best Settings per Resolution

At 1920x1080, the best settings that stay at or above 60 FPS are Ultra, with an average FPS of 103. This is the most demanding preset available, and it clears the threshold by 43 FPS. Users can enable all visual features without concern for frame rate dips.

At 2560x1440, the best settings are also Ultra, averaging 66 FPS. This is above 60 FPS but with only a 6 FPS margin. Users who prefer a larger buffer might consider High, which averages 87 FPS, but Ultra is technically playable and offers the highest quality.

At 3840x2160, the best settings that stay at or above 60 FPS are Low, averaging 73 FPS. Medium averages 56 FPS and falls below the threshold, so Low is the only option for 4K playable performance. The 73 FPS average provides some headroom, but users should be aware that scene complexity could cause dips, as evidenced by the Medium preset’s 47 FPS minimum. For 4K gaming, the Low preset is the recommended choice to maintain a smooth experience.